Crack Orientation Determination of 304 Austenitic Stainless Steel Based on Alternating Current Field Measurement

[1]  G. Betta,et al.  A novel TMR based triaxial eddy current test probe for any orientation crack detection , 2021 .

[2]  Wenqian Wu,et al.  Magnetic Flux Leakage Course of Inner Defects and Its Detectable Depth , 2021 .

[3]  X. Lan,et al.  Simulation and quantitative study of cracks in 304 stainless steel under natural magnetization field , 2021 .

[4]  Di Li,et al.  Optimization Design of Ultrasonic Transducer With Multimatching Layer , 2021, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control.

[5]  Sen Yang,et al.  Aerodynamic-Parameter Identification and Attitude Control of Quad-Rotor Model with CIFER and Adaptive LADRC , 2021 .

[6]  A. Peyton,et al.  Determination of Surface Crack Orientation Based on Thin-Skin Regime Using Triple-Coil Drive–Pickup Eddy-Current Sensor , 2020, IEEE Transactions on Instrumentation and Measurement.

[7]  S. Ananthan,et al.  Study on the influence of temperature and vibration on indications of liquid penetrant testing of A516 low carbon steel , 2020 .

[8]  Junqi Gao,et al.  Uniaxial ACFM detection system for metal crack size estimation using magnetic signature waveform analysis , 2020 .

[9]  Ehsan Mohseni,et al.  A Study of the Automated Eddy Current Detection of Cracks in Steel Plates , 2019, Journal of Nondestructive Evaluation.

[10]  Bin Wu,et al.  Stress-Dependent Magnetic Flux Leakage: Finite Element Modelling Simulations Versus Experiments , 2019, Journal of Nondestructive Evaluation.

[11]  Ageng S. Repelianto,et al.  Flaw Detection in Aluminum Plates Using a Rotating Uniform Eddy Current Probe with Two Pairs of Excitation Coils , 2019, Metals.

[12]  Wei Li,et al.  Inspection of both inner and outer cracks in aluminum tubes using double frequency circumferential current field testing method , 2019, Mechanical Systems and Signal Processing.

[13]  Seyed Hossein Hesamedin Sadeghi,et al.  Determination of Crack Depth Profile in Cylindrical Metallic Structures, Using Alternating Current Field Measurement Data , 2019, Journal of Nondestructive Evaluation.

[14]  Luigi Ferrigno,et al.  Eddy Current Testing Probe Based on Double-Coil Excitation and GMR Sensor , 2019, IEEE Transactions on Instrumentation and Measurement.

[15]  Zenghua Liu,et al.  A direction-tunable shear horizontal mode array magnetostrictive patch transducer , 2018, NDT & E International.

[16]  He Cunfu,et al.  A novel generation method of oscillatory rotating eddy current for crack orientation determination and detection in metal plates , 2018, NDT & E International.

[17]  Toshiyuki Takagi,et al.  Influence of Plastic Deformation and Fatigue Damage on Electromagnetic Properties of 304 Austenitic Stainless Steel , 2018, IEEE Transactions on Magnetics.

[18]  Jiuhao Ge,et al.  Two-Step Interpolation Algorithm for Measurement of Longitudinal Cracks on Pipe Strings Using Circumferential Current Field Testing System , 2018, IEEE Transactions on Industrial Informatics.

[19]  Liu Zhitian,et al.  Composite magnetic flux leakage detection method for pipelines using alternating magnetic field excitation , 2017 .

[20]  Jian Liu,et al.  Analysis of signals for inclined crack detection through alternating current field measurement with a U-shaped probe , 2017 .

[21]  Hirotsugu Ogi,et al.  Inspection of stress corrosion cracking in welded stainless steel pipe using point-focusing electromagnetic-acoustic transducer , 2016 .

[22]  Jiuhao Ge,et al.  High sensitivity rotating alternating current field measurement for arbitrary-angle underwater cracks , 2016 .

[23]  Lalita Udpa,et al.  EC probe with orthogonal excitation coils and TMR sensor for CFRP inspection , 2019, International Journal of Applied Electromagnetics and Mechanics.

[24]  Satish S. Udpa,et al.  Rotating Field EC-GMR Sensor for Crack Detection at Fastener Site in Layered Structures , 2015, IEEE Sensors Journal.

[25]  Yihua Kang,et al.  Theoretical Analyses of MFL Signal Affected by Discontinuity Orientation and Sensor-Scanning Direction , 2015, IEEE Transactions on Magnetics.

[26]  C. Cordier,et al.  Eddy-current non-destructive testing system for the determination of crack orientation , 2014 .