Multi-location laser ignition using a spatial light modulator towards improving automotive gasoline engine performance

Abstract We report on a study into multi-location laser ignition (LI) with a Spatial Light Modulator (SLM), to improve the performance of a single cylinder automotive gasoline engine. Three questions are addressed: i/ How to deliver a multi-beam diffracted pattern into an engine cylinder, through a small opening, while avoiding clipping? ii/ How much incident energy can a SLM handle (optical damage threshold) and how many simultaneous beam foci could thus be created? ; iii/ Would the multi-location sparks created be sufficiently intense and stable to ignite an engine and, if so, what would be their effect on engine performance compared to single-location LI? Answers to these questions were determined as follows. Multi-beam diffracted patterns were created by applying computer generated holograms (CGHs) to the SLM. An optical system for the SLM was developed via modelling in ZEMAX, to cleanly deliver the multi-beam patterns into the combustion chamber without clipping. Optical damage experiments were carried out on Liquid Crystal on Silicon (LCoS) samples provided by the SLM manufacturer and the maximum safe pulse energy to avoid SLM damage found to be 60 mJ. Working within this limit, analysis of the multi-location laser induced sparks showed that diffracting into three identical beams gave slightly insufficient energy to guarantee 100% sparking, so subsequent engine experiments used 2 equal energy beams laterally spaced by 4 mm. The results showed that dual-location LI gave more stable combustion and higher engine power output than single-location LI, for increasingly lean air-fuel mixtures. The paper concludes by a discussion of how these results may be exploited.

[1]  Mohamed H. Morsy,et al.  Laser-induced multi-point ignition with a single-shot laser using two conical cavities for hydrogen/air mixture , 2003 .

[2]  Ernst Wintner,et al.  Laser‐initiated ignition , 2010 .

[3]  M. Weinrotter,et al.  Laser ignition of engines: multipoint, fiber delivery, and diagnostics , 2005, Advanced Laser Technologies.

[4]  Geoff Dearden,et al.  Laser ignited engines: progress, challenges and prospects. , 2013, Optics express.

[5]  M. Weinrotter,et al.  Laser ignition of engines: a realistic option! , 2006, International Conference on Lasers, Applications, and Technologies.

[6]  Paul D. Ronney.  Laser versus conventional ignition of flames , 1994 .

[7]  Mohamed H. Morsy,et al.  Review and recent developments of laser ignition for internal combustion engines applications , 2012 .

[8]  Geoff Dearden,et al.  Multiple pulse laser ignition in GDI lean combustion , 2016 .

[9]  Geoff Dearden,et al.  The influence of beam energy, mode and focal length on the control of laser ignition in an internal combustion engine , 2007 .

[10]  H. Dammann,et al.  High-efficiency in-line multiple imaging by means of multiple phase holograms , 1971 .

[11]  Charles E. Roberts,et al.  Laser Ignition in a Pre-Mixed Engine: The Effect of Focal Volume and Energy Density on Stability and the Lean Operating Limit , 2005 .

[12]  Takunori Taira,et al.  Composite, all-ceramics, high-peak power Nd:YAG/Cr(4+):YAG monolithic micro-laser with multiple-beam output for engine ignition. , 2011, Optics express.

[13]  S. Edwardson,et al.  Ultrafast laser parallel microprocessing using high uniformity binary Dammann grating generated beam array , 2013 .

[14]  T. Phuoc.  Laser-induced spark ignition fundamental and applications , 2006 .

[15]  G. Dearden,et al.  Multi-point laser spark generation for internal combustion engines using a spatial light modulator , 2014, Journal of Physics D: Applied Physics.

[16]  Johannes Courtial,et al.  Interactive approach to optical tweezers control. , 2006, Applied optics.