The bitumen microstructure: a fluorescent approach

Five bituminous samples were carefully studied by confocal laser scanning microscopy using 488 nm excitation radiation and observing 500–530 nm of emission. The images revealed the microstructure of bitumen. The influence of the admixture of mineral aggregates concerning the microstructure was tested. For the minerals, no significant influence was found. For understanding the origin of fluorescent signals, the samples were separated into asphaltenes and maltenes and analyzed with fluorescence spectroscopy. Although former works have assumed the origin of fluorescent emissions in bitumen to be found in the asphaltene fraction, the asphaltenes produce little to no emissions, but the maltenes exhibit strong fluorescence in the observed spectral region. For deeper insight, fractionation of the bitumina into the SARA fractions by chromatographic column separation was necessary. The fluorescence spectra of these fractions were analyzed and revealed the aromatics and resin phases to be the only components capable of sufficiently intense fluorescent emission. This is a strong argument for a complex internal microstructure consisting of a mantle of aromatics surrounding an inner core.

[1]  Björn Birgisson,et al.  Adhesive surface characteristics of bitumen binders investigated by Atomic Force Microscopy , 2013 .

[2]  Lihui Xue,et al.  Investigation of microstructures and ultraviolet aging properties of organo-montmorillonite/SBS modified bitumen , 2011 .

[3]  T. Yen,et al.  Structural studies of asphaltics by x-ray small angle scattering , 1970 .

[4]  A. Gil-Villegas,et al.  Molecular View of the Asphaltene Aggregation Behavior in Asphaltene−Resin Mixtures , 2003 .

[5]  H. R. Fischer,et al.  On the investigation of the bulk microstructure of bitumen – Introducing two new techniques , 2014 .

[6]  S. Bearsley,et al.  Direct observation of the asphaltene structure in paving‐grade bitumen using confocal laser‐scanning microscopy , 2004, Journal of microscopy.

[7]  R. Haverkamp,et al.  Studies of the microstructure of polymer‐modified bitumen emulsions using confocal laser scanning microscopy , 2001, Journal of microscopy.

[8]  Johan Sjöblom,et al.  Asphaltene Aggregation from Crude Oils and Model Systems Studied by High-Pressure NIR Spectroscopy , 2002 .

[9]  Roman Lackner,et al.  Is Low-Temperature Creep of Asphalt Mastic Independent of Filler Shape and Mineralogy?—Arguments from Multiscale Analysis , 2005 .

[10]  Åsa Laurell Lyne,et al.  Interaction Forces between Mineral Aggregates and Bitumen Calculated Using the Hamaker Constant , 2010 .

[11]  L. Barré,et al.  On the Size Distribution of Self-Associated Asphaltenes , 2013 .

[12]  Dallas N. Little,et al.  Adhesion in Bitumen-Aggregate Systems and Quantification of the Effects of Water on the Adhesive Bond , 2005 .

[13]  R. N. Hunter,et al.  The Shell bitumen handbook , 2015 .

[14]  M. Michels,et al.  The microstructure of petroleum vacuum residue films for bituminous concrete: a microscopy approach , 2011, Journal of microscopy.

[15]  D. Lesueur.  The colloidal structure of bitumen: consequences on the rheology and on the mechanisms of bitumen modification. , 2009, Advances in colloid and interface science.

[16]  Emmanuel Chailleux,et al.  Physico-chemical analysis of five hard bitumens: Identification of chemical species and molecular organization before and after artificial aging , 2010 .

[17]  T. McNally,et al.  Polystyrene and asphaltene micelles within blends with a bitumen of an SBS block copolymer and styrene and butadiene homopolymers , 2003 .

[18]  Bituminous emulsions and their characterization by atomic force microscopy , 2000, Journal of microscopy.

[19]  G. Werner,et al.  Instrumentelle Analytik. Grundlagen – Geräte – Anwendungen , 1999 .

[20]  Emmanuel Chailleux,et al.  Laboratory investigation of bitumen based on round robin DSC and AFM tests , 2014 .

[21]  R. J. Forbes.  Bitumen and petroleum in antiquity , 1936 .

[22]  Lamia Goual,et al.  Asphaltene aggregation and impact of alkylphenols. , 2014, Langmuir : the ACS journal of surfaces and colloids.

[23]  Per Redelius,et al.  Relation between bitumen chemistry and performance , 2015 .

[24]  A. Topal.  Evaluation of the properties and microstructure of plastomeric polymer modified bitumens , 2010 .

[25]  Roman Lackner,et al.  Upscaling of viscoelastic properties of highly-filled composites: Investigation of matrix–inclusion-type morphologies with power-law viscoelastic material response , 2009 .

[26]  Amit Bhasin,et al.  Development of methods to quantify bitumen-aggregate adhesion and loss of adhesion due to water , 2007 .

[27]  E. I. Vargha-Butler,et al.  Surface tension of bitumen from contact angle measurements on films of bitumen , 1988 .

[28]  J. Füssl,et al.  Influence of asphaltene content on mechanical bitumen behavior: experimental investigation and micromechanical modeling , 2015 .

[29]  L. Boulangé,et al.  Physicochemical characterisations of the bitumen–aggregate interface to get a better understanding of stripping phenomena , 2013 .

[30]  H. S. Fogler,et al.  A Unified Model for Aggregation of Asphaltenes , 2013 .

[31]  G. Schitter,et al.  Temperature and thermal history dependence of the microstructure in bituminous materials , 2013 .

[32]  J. Verhoeven,et al.  On the applicability of the Kasha---Vavilov rule to C60 , 1994 .

[33]  D. Martín,et al.  Cryo-Scanning Electron Microscopy: A New Tool for Interpretation of Fracture Studies in Bitumen/Polymer Blends , 2002 .

[34]  R. Mikula,et al.  Characterization of emulsions and suspensions in the petroleum industry using cryo-SEM and CLSM , 2000 .

[35]  L. Corbett,et al.  Composition of asphalt based on generic fractionation, using solvent deasphaltening, elution-adsorption chromatography, and densimetric characterization , 1969 .

[36]  Xiaohu Lu,et al.  Wax morphology in bitumen , 2005 .

[37]  L. Loeber,et al.  Bitumen in colloid science: a chemical, structural and rheological approach , 1998 .

[38]  Åsa Laurell Lyne,et al.  Surface wrinkling: the phenomenon causing bees in bitumen , 2013, Journal of Materials Science.

[39]  Mingjiang Tao,et al.  A systematic AFM-based method to measure adhesion differences between micron-sized domains in asphalt binders , 2013 .

[40]  E. Sheu,et al.  Physics of asphaltene micelles and microemulsions : theory and experiment , 1996 .

[41]  Roman Lackner,et al.  Generalized self-consistent scheme for upscaling of viscoelastic properties of highly-filled matrix-inclusion composites – Application in the context of multiscale modeling of bituminous mixtures , 2012 .

[42]  P. Levitz,et al.  Organization of Asphaltenes in a Vacuum Residue: A Small-Angle X-ray Scattering (SAXS)–Viscosity Approach at High Temperatures , 2012 .

[43]  S. Acevedo,et al.  Changes of Diameter Distribution with Temperature Measured for Asphaltenes and Their Fractions A1 and A2. Impact of These Measurements in Colloidal and Solubility Issues of Asphaltenes , 2012 .

[44]  Guo-hua Yang,et al.  Study on the polarity, solubility, and stacking characteristics of asphaltenes , 2014 .

[45]  P. Levitz,et al.  Mesoscale Organization in a Physically Separated Vacuum Residue: Comparison to Asphaltenes in a Simple Solvent , 2012 .

[46]  H. Rahimi,et al.  Investigation on Agglomeration−Fragmentation Processes in Colloidal Asphaltene Suspensions , 2009 .

[47]  Xiaohu Lu,et al.  Compositional and structural characterization of waxes isolated from bitumens , 2006 .

[48]  R. H. Mitchell,et al.  Spectroscopic Properties of Polycyclic Aromatic Compounds. Part IV: Effect of Solvent Polarity and Nitromethane on the Fluorescence Emission Behavior of Select Bipolycyclic Aromatic Hydrocarbons , 1994 .

[49]  G. Patonay,et al.  Molecular fluorescence, phosphorescence, and chemiluminescence spectrometry. , 1988, Analytical chemistry.

[50]  J. Ancheyta,et al.  Structural Characterization of Asphaltenes Obtained from Hydroprocessed Crude Oils by SEM and TEM , 2009 .

[51]  L. Loeber,et al.  New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopy , 1996 .

[52]  K. Horie,et al.  Terminology of polymers and polymerization processes in dispersed systems (IUPAC Recommendations 2011) , 2011 .

[53]  Burak Sengoz,et al.  Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods. , 2008, Journal of hazardous materials.