Seismic actions on structures in the near-source region of the 2016 central Italy sequence

The central Italy seismic sequence began in the latter half of 2016 and continued well into 2017, causing severe damage in the villages close to the source and causing hundreds of casualties. It is a sequence especially interesting to study, from the perspective of seismic actions experienced by structures, because it saw nine M ≥ 5.0 earthquakes within a period of 5 months, rupturing parts of the complex central Apennine mountain range fault system. Consequently, some of the main earthquake engineering issues that arose are the multiple locations where the code-mandated seismic actions were exceeded in more than one of the main events of the sequence and the number of pre- and low-code existing buildings that suffered heavy damage or collapse due to the intensity of individual earthquakes and the cumulative effect of repeated damaging shocks. The present article picks up on these topics and uses probabilistic seismic hazard, as well as the multitude of strong ground motion recordings available from the sequence, to provide a discussion on certain issues, that are all related to the topical subject of seismic actions. These issues are: (1) the unsurprising exceedance of code spectra in the epicentral areas of strong earthquakes; (2) the particular spectral shape and damaging potential of near-source, pulse-like, ground motions, possibly related to rupture directivity; and (3) structural non-linear behaviour in the wake of a sequence that produces repeated strong shaking without the necessary respite for repair and retrofit operations.

[1]  Massimiliano Stucchi,et al.  Seismic hazard in the Po Plain and the 2012 Emilia earthquakes , 2012 .

[2]  S. Mahin,et al.  Aseismic design implications of near‐fault san fernando earthquake records , 1978 .

[3]  Giovanni Battista Barla,et al.  Geotechnical Aspects of the L’Aquila Earthquake , 2012 .

[4]  Filiberto Chiabrando,et al.  Engineering Reconnaissance Following the October 2016 Central Italy Earthquakes - Version 2 , 2017 .

[5]  J. Howard,et al.  Comparing Observed and Predicted Directivity in Near-Source Ground Motion , 2005 .

[6]  Jack W. Baker,et al.  Quantitative Classification of Near-Fault Ground Motions Using Wavelet Analysis , 2007 .

[7]  N. Abrahamson,et al.  Modification of Empirical Strong Ground Motion Attenuation Relations to Include the Amplitude and Duration Effects of Rupture Directivity , 1997 .

[8]  David M. Boore,et al.  Peak horizontal acceleration and velocity from strong motion records including records from the 1979 Imperial Valley, California, earthquake , 1981 .

[9]  J. Bommer,et al.  PREDICTION OF HORIZONTAL RESPONSE SPECTRA IN EUROPE , 1996 .

[10]  Dimitrios Vamvatsikos,et al.  Direct Estimation of Seismic Demand and Capacity of Multidegree-of-Freedom Systems through Incremental Dynamic Analysis of Single Degree of Freedom Approximation , 2005 .

[11]  C. Allin Cornell,et al.  Probability of Occurrence of Velocity Pulses in Near-Source Ground Motions , 2008 .

[12]  Jack W. Baker,et al.  An Empirically Calibrated Framework for Including the Effects of Near-Fault Directivity in Probabilistic Seismic Hazard Analysis , 2011 .

[13]  R. Mcguire.  Seismic Hazard and Risk Analysis , 2004 .

[14]  C. Allin Cornell,et al.  Structural performance assessment under near‐source pulse‐like ground motions using advanced ground motion intensity measures , 2008 .

[15]  Luca Malagnini,et al.  Characteristics of the strong ground motions from the 6 April 2009 L’Aquila earthquake, Italy , 2010 .

[16]  M. Fardis,et al.  Residual displacements of RC structures as SDOF systems , 2015 .

[17]  Eugenio Chioccarelli,et al.  Near‐source seismic demand and pulse‐like records: A discussion for L'Aquila earthquake , 2010 .

[18]  L. Faenza,et al.  The Central Italy Seismic Sequence between August and December 2016: Analysis of Strong‐Motion Observations , 2017 .

[19]  Iunio Iervolino,et al.  Probabilities and Fallacies: Why Hazard Maps Cannot be Validated by Individual Earthquakes * , 2013 .

[20]  C. Cornell,et al.  Building life-cycle cost analysis due to mainshock and aftershock occurrences , 2009 .

[21]  Massimiliano Stucchi,et al.  A seismic source zone model for the seismic hazard assessment of the Italian territory , 2008 .

[22]  Iunio Iervolino,et al.  Markovian modeling of seismic damage accumulation , 2016 .

[23]  J. Baker,et al.  A vector‐valued ground motion intensity measure consisting of spectral acceleration and epsilon , 2005 .

[24]  H. Crowley,et al.  Seismic Hazard Assessment (2003–2009) for the Italian Building Code , 2011 .

[25]  I. Iervolino,et al.  Engineering design earthquakes from multimodal hazard disaggregation , 2011 .

[26]  Dimitrios Vamvatsikos,et al.  Analytical modelling of near‐source pulse‐like seismic demand for multi‐linear backbone oscillators , 2016 .

[27]  Iunio Iervolino,et al.  Inelastic displacement ratio of near‐source pulse‐like ground motions , 2012 .

[28]  Iunio Iervolino,et al.  Engineering seismic demand in the 2012 Emilia sequence: preliminary analysis and model compatibility assessment , 2012 .

[29]  Eduardo Miranda,et al.  Evaluation of residual drift demands in regular multi‐storey frames for performance‐based seismic assessment , 2006 .

[30]  Iunio Iervolino,et al.  Spectral shape proxies and nonlinear structural response , 2011 .

[31]  J. Bommer,et al.  Style-of-Faulting in Ground-Motion Prediction Equations , 2003 .

[32]  Iunio Iervolino,et al.  Preliminary engineering analysis of the August 24th 2016, ML 6.0 central Italy earthquake records , 2016 .

[33]  Dimitrios Vamvatsikos,et al.  Incremental dynamic analysis , 2002 .

[34]  Natalia Poiata,et al.  Mechanisms for Generation of Near-Fault Ground Motion Pulses for Dip-Slip Faulting , 2017, Pure and Applied Geophysics.

[35]  Gee Liek Yeo,et al.  Equivalent constant rates for post-quake seismic decision making , 2009 .