Effect of sintering temperature on the microstructure and properties of Ti/W–C reinforced Fe-based composites

[1]  Shang Zhu,et al.  Selective laser remelting of in-situ Al2O3 particles reinforced AlSi10Mg matrix composite: Densification, microstructure and microhardness , 2021 .

[2]  L. Hultman,et al.  The same chemical state of carbon gives rise to two peaks in X-ray photoelectron spectroscopy , 2021, Scientific Reports.

[3]  Zhencai Zhu,et al.  Phase evolution and wear resistance of in-situ synthesized (Cr, W)23C6-WC composite ceramics reinforced Fe-based composite coatings produced by laser cladding , 2021 .

[4]  Ping Li,et al.  Effects of manganese on diffusion and wear behavior of ZTA particles reinforced iron matrix composites in vacuum , 2020 .

[5]  L. Hultman,et al.  X-ray photoelectron spectroscopy: Towards reliable binding energy referencing , 2020, Progress in Materials Science.

[6]  Min You,et al.  Improving wear resistance and friction stability of FeNi matrix coating by in-situ multi-carbide WC-TiC via PTA metallurgical reaction , 2019, Surface and Coatings Technology.

[7]  T. Tokarski,et al.  Local composite reinforcements of TiC/FeMn type obtained in situ in steel castings , 2019, Archives of Civil and Mechanical Engineering.

[8]  Min Fang,et al.  Microstructure evolution, recrystallization and tribological behavior of TiC/WC composite ceramics coating , 2019, Vacuum.

[9]  V. Sglavo,et al.  Microstructural temperature gradient-driven diffusion: Possible densification mechanism for flash sintering of zirconia? , 2019, Ceramics International.

[10]  L. Hultman,et al.  Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: Resolving the myth of apparent constant binding energy of the C 1s peak , 2018, Applied Surface Science.

[11]  Y. Sui,et al.  Characterization of interfacial layer of ZTA ceramic particles reinforced iron matrix composites , 2018 .

[12]  K. Zhou,et al.  New production of (Ti, W)C-based cermets toughened by in-situ formed WC and twinned (Ti, W)C platelets: Carbonization of the Nix(Ti0.6, W0.4)4C-type η phases , 2018 .

[13]  S. Hong,et al.  In-situ synthesis of TiC/Fe alloy composites with high strength and hardness by reactive sintering , 2017, Journal of Materials Science & Technology.

[14]  K. Gao,et al.  In situ synthesis WC reinforced iron surface composite produced by spark plasma sintering and casting , 2018 .

[15]  K. Gao,et al.  The effect of volume fraction of WC particles on wear behavior of in-situ WC/Fe composites by spark plasma sintering , 2017 .

[16]  L. Hultman,et al.  C 1s Peak of Adventitious Carbon Aligns to the Vacuum Level: Dire Consequences for Material's Bonding Assignment by Photoelectron Spectroscopy , 2017, Chemphyschem : a European journal of chemical physics and physical chemistry.

[17]  P. Giri,et al.  Strain induced phase formation, microstructural evolution and bandgap narrowing in strained TiO2 nanocrystals grown by ball milling , 2016 .

[18]  Yunhua Xu,et al.  Fe–W–C thermodynamics and in situ preparation of tungsten carbide-reinforced iron-based surface composites by solid-phase diffusion , 2016 .

[19]  O. Isnard,et al.  Nanocrystalline/nanosized manganese substituted nickel ferrites – Ni1−xMnxFe2O4 obtained by ceramic-mechanical milling route , 2016 .

[20]  Z. Yao,et al.  Effect of WC content on microstructure and mechanical properties of Ni3Al-bonded cermets , 2016 .

[21]  M. Chmielewski,et al.  The measurement of the adhesion force between ceramic particles and metal matrix in ceramic reinforced-metal matrix composites , 2015 .

[22]  Yiping Wu,et al.  Microstructure and mechanical properties of Al/(Ti,W)C composites prepared by microwave sintering , 2014 .

[23]  Guopeng Zhang,et al.  Effect of Mo addition on microstructure and mechanical properties of (Ti,W)C solid solution based cermets , 2014 .

[24]  D. Suh,et al.  Stability of (Ti, M)C (M = Nb, V, Mo and W) carbide in steels using first-principles calculations , 2012 .

[25]  Yunhua Xu,et al.  In situ fabrication of titanium carbide particulates-reinforced iron matrix composites , 2011 .

[26]  Jae-Keel Lim,et al.  Microstructure of (W,Ti)C–Co system containing platelet WC , 2010 .

[27]  Shinhoo Kang,et al.  On the quantitative analysis of secondary carbide and carbon in (Ti1−xMx)C solid solutions via XRD measurements , 2008 .

[28]  A. Azadmehr,et al.  An in situ (W,Ti)C-Ni composite fabricated by SHS method , 2008 .

[29]  Z. Guo,et al.  Thermodynamic and lattice parameter calculation of TiCx produced from Al-Ti-C powders by laser igniting self-propagating high-temperature synthesis , 2007 .

[30]  Brian F. Woodfield,et al.  Evidence of linear lattice expansion and covalency enhancement in rutile TiO2 nanocrystals , 2004 .

[31]  Anish Kumar,et al.  Characterization of microstructures in Inconel 625 using X-ray diffraction peak broadening and lattice parameter measurements , 2004 .

[32]  S. K. Pradhan,et al.  Preparation of zinc ferrite by high-energy ball-milling and microstructure characterization by Rietveld’s analysis , 2003 .

[33]  H. Berns,et al.  Development of an abrasion resistant steel composite with in situ TiC particles , 2001 .

[34]  Z. A. Munir,et al.  Self-propagating exothermic reactions: the synthesis of high-temperature materials by combustion , 1989 .

[35]  J. Murray.  The Fe−Ti (Iron-Titanium) system , 1981 .