The effects of key parameters on the transition from SI combustion to HCCI combustion in a two-stroke free piston linear engine

An investigation was conducted to examine the effects of key parameters such as intake temperature, equivalence ratio, engine load, intake pressure, spark timing and spring stiffness on the transition from SI combustion to HCCI combustion in a two-stroke free piston linear engine. Operation of the free piston engine was simulated based on the combination of three mathematical models including a dynamic model, a linear alternator model and a thermodynamic model. These mathematical models were combined and solved by a program written in Fortran. To validate the mathematical models, the simulation results were compared with experimental data in the SI mode. For the transition from SI combustion to HCCI combustion, the simulation results show that if the equivalence ratio is decreased, the intake temperature and engine load should be increased to get a successful SI-HCCI transition. However, the simulation results also show that the in-cylinder pressure is decreased, while the peak in-cylinder temperature in HCCI mode is increased significantly if the intake temperature is increased so much. Beside the successful SI-HCCI transition, the increase of intake pressure from Pin=1.1bar to Pin=1.6bar is one of solutions to reduce peak in-cylinder temperature in HCCI mode. However, the simulation results also indicate that if the intake pressure is increased so much (Pin=1.6bar), the engine knocking problem is occurred. Adjusting spring stiffness from k=2.9N/mm to k=14.7N/mm is also considered one of useful solutions for reducing the peak in-cylinder temperature in HCCI mode as well as avoiding engine knock. Besides, the change of spark timing is suggested as a benefic method to help the control of the SI-HCCI transition to be more convenient. To get a successful SI-HCCI transition with reducing of peak temperature in HCCI mode as well as avoiding engine knock, the simulation results show that the engine should be operated with following conditions: equivalence ratio ϕ=0.7, engine load RL=180Ω, intake temperature Tin=400K, intake pressure Pin=1.2bar, spark timing in SI mode xig=3mm and spring stiffness k=14.7N/mm.

[1]  Lu Jau-Huai,et al.  Single Zone Model for HCCI Engine Fueled with n-Heptane , 2009 .

[2]  Guoming G. Zhu,et al.  A two-zone control oriented SI-HCCI hybrid combustion model for the HIL engine simulation , 2011, Proceedings of the 2011 American Control Conference.

[3]  Jiabin Wang,et al.  A Linear Permanent Magnet Generator for a Free-Piston Energy Converter , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[4]  Ingemar Denbratt,et al.  Simulation of a Two-Stroke Free Piston Engine , 2004 .

[5]  S. Henriot,et al.  Computational design studies for a high-efficiency and low-emissions free piston engine prototype , 2004 .

[6]  S. Nasar,et al.  Fields in permanent magnet linear synchronous machines , 1986 .

[7]  Hatim Machrafi,et al.  An experimental and numerical analysis of the influence of the inlet temperature, equivalence ratio and compression ratio on the HCCI auto-ignition process of Primary Reference Fuels in an engine , 2008 .

[8]  R. Mikalsen,et al.  Coupled dynamic-multidimensional modelling of free-piston engine combustion. ⋆ , 2009 .

[9]  R. Mikalsen,et al.  The control of a free-piston engine generator. Part 2: Engine dynamics and piston motion control , 2010 .

[10]  Richard J. Atkinson,et al.  Numerical Simulation of a Two-Stroke Linear Engine-Alternator Combination , 1999 .

[11]  Mehran Bidarvatan,et al.  Optimal Integral State Feedback Control of HCCI Combustion Timing , 2011 .

[12]  J. Christian Gerdes,et al.  Modeling cycle-to-cycle dynamics and mode transition in HCCI engines with variable valve actuation , 2006 .

[13]  William H. Green,et al.  PREDICTION OF PERFORMANCE MAPS FOR HOMOGENEOUS-CHARGE COMPRESSION-IGNITION ENGINES , 2004 .

[14]  Andrew P. Wandel,et al.  Effect of different heat transfer models on a diesel homogeneous charge compression ignition engine , 2013 .

[15]  J. Christian Gerdes,et al.  Tackling the Transition: A Multi-Mode Combustion Model of SI and HCCI for Mode Transition Control , 2004 .

[16]  P. Therkelsen,et al.  Small-Scale HCCI Engine Operation , 2011 .

[17]  Matti Vilenius,et al.  First Cycles of the Dual Hydraulic Free Piston Engine , 2000 .

[18]  Zheng Huang,et al.  Parametric study of a free piston linear alternator , 2010 .

[19]  Nigel N. Clark,et al.  Numerical Simulation for Parametric Study of a Two-Stroke Direct Injection Linear Engine , 2002 .

[20]  Jamil Ghojel,et al.  Review of the development and applications of the Wiebe function: A tribute to the contribution of Ivan Wiebe to engine research , 2010 .

[21]  Chia-Jui Chiang,et al.  Dynamic modeling of a SI/HCCI free-piston engine generator with electric mechanical valves , 2013 .

[22]  W. Stuart Neill,et al.  An Experimental and Modeling Study of HCCI Combustion Using n-Heptane , 2006 .

[23]  G. Rizzoni,et al.  A control-oriented model of combustion process in a HCCI diesel engine , 2005, Proceedings of the 2005, American Control Conference, 2005..

[24]  J. Eng,et al.  Characterization of Pressure Waves in HCCI Combustion , 2002 .

[25]  R. Mikalsen,et al.  The control of a free-piston engine generator. Part 1: Fundamental analyses , 2010 .

[26]  Andrew P. Wandel,et al.  Predicting the combustion behaviour of a diesel HCCI engine using a zero-dimensional single-zone model , 2011 .

[27]  Parviz Famouri,et al.  Integrated design of linear alternator/engine system for HEV auxiliary power unit , 2001, IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485).

[28]  Yang Wang,et al.  Numerical analysis of two-stroke free piston engine operating on HCCI combustion , 2011 .

[29]  Hans-Erik Ångström,et al.  Integrated Simulation and Engine Test of Closed Loop HCCI Control by aid of Variable Valve Timings , 2003 .

[30]  A. Amer,et al.  Using Engine Experiments to Isolate Fuel Equivalence Ratio Effects on Heat Release in HCCI Combustion , 2010 .

[31]  C. Edwards,et al.  Dynamic Modeling of Residual-Affected Homogeneous Charge Compression Ignition Engines with Variable Valve Actuation , 2005 .

[32]  R. Mikalsen,et al.  A computational study of free-piston diesel engine combustion , 2009 .

[33]  Jasim Ahmed,et al.  A physics-based approach to the control of homogeneous charge compression ignition engines with variable valve actuation , 2005 .

[34]  S. Jazayeri,et al.  EFFECT OF INITIAL TEMPERATURE AND EGR ON COMBUSTION AND PERFORMANCE CHARACTERISTICS OF HOMOGENOUS CHARGE COMPRESSION IGNITION ENGINE FUELED WITH DIMETHYL ETHER , 2009 .

[35]  Lixin Peng,et al.  Free Piston Engine Its Application and Optimization , 2000 .

[36]  Nigel N. Clark,et al.  The Linear Engine in 2004 , 2005 .

[37]  Zoran Filipi,et al.  Analysis of Load and Speed Transitions in an HCCI Engine Using 1-D Cycle Simulation and Thermal Networks , 2006 .

[38]  Jun Qiao,et al.  An autoignition combustion model for homogeneous charge compression ignition engine cycle simulations , 2009 .

[39]  Ocktaeck Lim,et al.  Simulation study of SI-HCCI transition in a two-stroke free piston engine fuelled with propane , 2014 .

[40]  Yoshishige Ohyama.  Engine Modeling of HCCI Transient Operations , 2005 .

[41]  Zhen Huang,et al.  Flat-type permanent magnet linear alternator: A suitable device for a free piston linear alternator , 2009 .

[42]  R. Mikalsen,et al.  A review of free-piston engine history and applications , 2007 .

[43]  Zhijun Wu,et al.  Simulations of Key Design Parameters and Performance Optimization for a Free-piston Engine , 2010 .

[44]  Jin Xiao,et al.  Simulation of a Two-Stroke Free-Piston Engine for Electrical Power Generation , 2008 .

[45]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[46]  Andrew P. Wandel,et al.  A review of hydrogen and natural gas addition in diesel HCCI engines , 2014 .

[47]  Gordon P. Blair,et al.  Design and Simulation of Two-Stroke Engines , 1996 .

[48]  Morgan Heikal,et al.  Evaluation of HCCI for Future Gasoline Powertrains , 2003 .

[49]  Paul M. Najt,et al.  Investigations into the Effects of Thermal and Compositional Stratification on HCCI Combustion – Part II: Optical Engine Results , 2009 .

[50]  Peter Van Blarigan,et al.  A numerical study of a free piston ic engine operating on homogeneous charge compression ignition combustion , 1999 .

[51]  H. Ng,et al.  Homogeneous Charge Compression Ignition (HCCI) combustion: Implementation and effects on pollutants in direct injection diesel engines , 2011 .

[52]  A. M. Leman,et al.  Effects of Intake Temperature and Equivalence Ratio on HCCI Ignition Timing and Emissions of a 2-Stroke Engine , 2013 .

[53]  Peter Van Blarigan,et al.  Homogeneous Charge Compression Ignition with a Free Piston: A New Approach to Ideal Otto Cycle Performance , 1998 .

[54]  John E. Dec,et al.  Boosted HCCI for high power without engine knock and with ultra-low NOx emissions - Using conventional gasoline , 2010 .

[55]  Hua Zhao.  Hcci and Cai Engines for the Automotive Industry , 2007 .

[56]  Hans-Erik Ångström,et al.  Transient Control of HCCI Through Combined Intake and Exhaust Valve Actuation , 2003 .