Primary analysis of the ocean color remote sensing data of the HY-1B/COCTS

China had successfully launched her second ocean color satellite HY-1B on 11 Apr., 2007, which was the successor of the HY-1A satellite launched on 15 May, 2002. There were two sensors onboard HY-1B, named the Chinese Ocean Color and Temperature Scanner (COCTS) and the Coastal Zone Imager (CZI) respectively, and COCTS was the main sensor. COCTS had not only eight visible and near-infrared wave bands similar to the SeaWiFS, but also two more thermal infrared wave bands to measure the sea surface temperature. Therefore, COCTS had broad application potentiality, such as fishery resource protection and development, coastal monitoring and management and marine pollution monitoring. In this paper, the main characteristics of COCTS were described firstly. Then, using the crosscalibration method, the vicarious calibration of COCTS was carried out by the synchronous remote sensing data of SeaWiFS, and the results showed that COCTS had well linear responses for the visible light bands with the correlation coefficients more than 0.98, however, the performances of the near infrared wavelength bands were not good as visible light bands. Using the vicarious calibration result, the operational atmospheric correction (AC) algorithm of COCTS was developed based on the exact Rayleigh scattering look-up table (LUT), aerosol scattering LUT and atmosphere diffuse transmission LUT generated by the coupled ocean-atmospheric vector radiative transfer numerical model named PCOART. The AC algorithm had been validated by the simulated radiance data at the top-of-atmosphere, and the results showed the errors of the water-leaving reflectance retrieved by the AC algorithm were less than 0.0005, which met the requirement of the exactly atmospheric correction of ocean color remote sensing. Finally, the AC algorithm was applied to the HY-1B/COCTS remote sensing data, and the corresponding ocean color remote sensing products have been generated.

[1]  Menghua Wang,et al.  Retrieval of water-leaving radiance and aerosol optical thickness over the oceans with SeaWiFS: a preliminary algorithm. , 1994, Applied optics.

[2]  Bryan A. Franz,et al.  Comparing the ocean color measurements between MOS and SeaWiFS: a vicarious intercalibration approach for MOS , 2000, IEEE Trans. Geosci. Remote. Sens..

[3]  Zhu Qiankun,et al.  Vector radiative transfer numerical model of coupled ocean-atmosphere system using matrix-operator method , 2007 .

[4]  Howard R. Gordon,et al.  In-Orbit Calibration Strategy for Ocean Color Sensors , 1998 .

[5]  Menghua Wang.  A Sensitivity Study of the SeaWiFS Atmospheric Correction Algorithm: Effects of Spectral Band Variations , 1999 .

[6]  André Morel,et al.  A multiple scattering algorithm for atmospheric correction of remotely sensed ocean colour (MERIS instrument): Principle and implementation for atmospheres carrying various aerosols including absorbing ones , 1999 .

[7]  Delu Pan,et al.  In-orbit cross-calibration of HY-1A satellite sensor COCTS , 2004 .

[8]  Xianqiang,et al.  Study on application potentiality of the first China's ocean satellite HY-1A , 2003 .

[9]  Menghua Wang,et al.  Calibration of ocean color scanners: how much error is acceptable in the near infrared? , 2002 .

[10]  E. Shettle,et al.  Models for the aerosols of the lower atmosphere and the effects of humidity variations on their optical properties , 1979 .

[11]  K. Stamnes,et al.  Comparison of numerical models for computing underwater light fields. , 1993, Applied optics.

[12]  Kendall L. Carder,et al.  Atmospheric correction and cross-calibration of LANDSAT-7/ETM+ imagery over aquatic environments: A multiplatform approach using SeaWiFS/MODIS , 2001 .

[13]  H. Yang,et al.  Remote sensing of ocean color: assessment of water-leaving radiance bidirectional effects on atmospheric diffuse transmittance. , 1997, Applied optics.