Fracture energy of natural fibre reinforced concrete

Abstract This paper reports on an experimental study of the fracture energy of concrete reinforced with natural fibres of hemp, elephant grass, and wheat straw. Concrete specimens containing 0.19% of fibres by weight and of 40 mm of length were uniaxially tested with the wedge splitting test (WST) method. The addition of fibres was found to improve the fracture toughness of plane concrete. The most distinctive increase in the fracture energy has been observed by hemp reinforced concrete, up to 70%, when comparing with non reinforced concrete, whereas for straw and elephant grass reinforced concrete this increase was moderate, up to 2% and 5%, respectively. The beneficial effect of hemp fibres is believed to be the result of the fibre’s high tensile strength and the fibre’s fineness, resulting in a better bonding between fibres and concrete matrix. The presence of fibres in concrete decreased minimally the tensile strength of concrete, for 4%, 7%, and 8% for hemp, straw and elephant grass reinforced specimens, respectively.

[1]  Sérgio Francisco dos Santos,et al.  Fracture and fatigue of natural fiber-reinforced cementitious composites , 2009 .

[2]  Barzin Mobasher,et al.  Effect of fiber shape and morphology on interfacial bond and cracking behaviors of sisal fiber cement based composites , 2011 .

[3]  Lijing Wang,et al.  Properties of hemp fibre reinforced concrete composites , 2006 .

[4]  John Forbes Olesen,et al.  Comparative study of fracture mechanical test methods for concrete , 2004 .

[5]  F. A. Silva,et al.  Physical and mechanical properties of durable sisal fiber–cement composites , 2010 .

[6]  M. Sierra-Beltran,et al.  Ductile Cement-Based Composites with Wood Fibres - material design and experimental approach , 2011 .

[7]  John Forbes Olesen,et al.  Wedge splitting test for a steel¿concrete interface , 2005 .

[8]  K. Scrivener,et al.  Durability of alkali-sensitive sisal and coconut fibres in cement mortar composites , 2000 .

[9]  E. K. Tschegg,et al.  New Equipments for Fracture Tests on Concrete , 1991 .

[10]  Antoine E. Naaman,et al.  High Performance Fiber Reinforced Cement Composites , 2008 .

[11]  Ingemar Löfgren,et al.  The wedge splitting test - a test method for assessment of fracture parameters of FRC? , 2004 .

[12]  Surendra P. Shah,et al.  Fiber-Reinforced Cement Composites , 1992 .

[13]  L. Aggarwal,et al.  Bagasse-reinforced cement composites , 1995 .

[14]  S. G. Bergström,et al.  Durability of alkali-sensitive fibres in concrete , 1984 .

[15]  Lucie Vandewalle,et al.  RILEM TC162-TDF : Test and Design Methods for Steel Fibre Reinforced Concrete : Bending Test, "Technical Recommendation" , 2002 .

[16]  Barzin Mobasher,et al.  Fatigue behavior of sisal fiber reinforced cement composites , 2010 .

[17]  R. Coutts,et al.  A review of Australian research into natural fibre cement composites , 2005 .

[18]  R. Coutts,et al.  Autoclaved bamboo pulp fibre reinforced cement , 1995 .

[19]  K. Scrivener,et al.  Development of vegetable fibre–mortar composites of improved durability , 2003 .

[20]  John Forbes Olesen,et al.  Wedge Splitting Test - A Test to Determine Fracture Properties of FRC , 2004 .

[21]  Rilem.  Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams , 1985 .

[22]  Z. Bažant,et al.  Fracture and Size Effect in Concrete and Other Quasibrittle Materials , 1997 .

[23]  Michèle Queneudec,et al.  Feasibility study of lightweight cement composite containing flax by-product particles: Physico-mechanical properties , 2008 .

[24]  Lucie Vandewalle,et al.  RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete: bending test , 2002 .

[25]  J. Hirunlabh,et al.  Development of fibre-based soil–cement block with low thermal conductivity , 2005 .

[26]  E. Fuente,et al.  Eucalyptus pulp fibres as alternative reinforcement to engineered cement-based composites , 2010 .

[27]  R. D. T. Filho,et al.  The hornification of vegetable fibers to improve the durability of cement mortar composites , 2011 .

[28]  Sidney Mindess,et al.  Fibre Reinforced Cementitious Composites , 1990 .

[29]  T. Langlet,et al.  The suitability of utilising flax by-product materials for lightweight cement composites , 2007 .

[30]  Holmer Savastano,et al.  Mechanically pulped sisal as reinforcement in cementitious matrices , 2003 .

[31]  Vanderley Moacyr John,et al.  Developments on vegetable fibre-cement based materials in Sao Paulo, Brazil: an overview , 2005 .

[32]  Paoli Ranalli,et al.  Advances in Hemp Research , 1999 .

[33]  Lucie Vandewalle,et al.  RILEM TC 162-TDF: Test and design methods for steel fibre reinforced concrete' - sigma-epsilon-design method - Final Recommendation , 2003 .