Effect of anodic polarization on carbon deposition on Ni/YSZ anodes exposed to methane

Abstract The formation of carbon is a problem when operating solid-oxide fuel cells (SOFC) containing nickel/yttria-stabilized zirconia (Ni/YSZ) anodes with hydrocarbon fuels directly. Previous studies have examined the carbon formed ex-situ on Ni/YSZ anodes. In this study, we have examined the carbon formed in-situ under operating conditions, and investigated the effects of current density, time, and anode thickness on both the amount and type of carbon formed at 1073 K using temperature programmed oxidation and scanning electron microscopy. The carbon formed under operating conditions was more reactive and contained hydrogen compared to the carbon formed at open circuit potential that did not contain hydrogen. When the current density was increased less carbon was deposited, but the characteristics of the carbon did not change. With increasing time and/or anode thickness, the carbon deposits became more difficult to remove and decreased in hydrogen content.

[1]  J. Bilbao,et al.  Coke aging and its incidence on catalyst regeneration , 2003 .

[2]  C. H. Bartholomew.  Carbon Deposition in Steam Reforming and Methanation , 1982 .

[3]  P. G. Menon.  Coke on catalysts-harmful, harmless, invisible and beneficial types , 1990 .

[4]  Ryuji Kikuchi,et al.  Fuel flexibility in power generation by solid oxide fuel cells , 2002 .

[5]  S. Neophytides,et al.  The nature and binding strength of carbon adspecies formed during the equilibrium dissociative adsorption of CH4 on Ni–YSZ cermet catalysts , 2003 .

[6]  Koichi Yamada,et al.  Oxidation mechanism and effective anode thickness of SOFC for dry methane fuel , 1996 .

[7]  I. Metcalfe,et al.  Study of the activity and deactivation of Ni-YSZ cermet in dry CH4 using temperature-programmed techniques , 1995 .

[8]  Ching-ju Wen,et al.  Carbon deposition behaviour on Ni–ScSZ anodes for internal reforming solid oxide fuel cells , 2004 .

[9]  S. Barnett,et al.  Direct operation of solid oxide fuel cells with methane fuel , 2005 .

[10]  Mogens Bjerg Mogensen,et al.  Structure/Performance Relations for Ni/Yttria‐Stabilized Zirconia Anodes for Solid Oxide Fuel Cells , 2000 .

[11]  Suttichai Assabumrungrat,et al.  Catalytic steam reforming of methane, methanol, and ethanol over Ni/YSZ : The possible use of these fuels in internal reforming SOFC , 2007 .

[12]  E. Iglesia,et al.  Isotopic and kinetic assessment of the mechanism of reactions of CH4 with CO2 or H2O to form synthesis gas and carbon on nickel catalysts , 2004 .

[13]  Tohru Kato,et al.  Imaging of CH4 decomposition around the Ni/YSZ interfaces under anodic polarization , 2005 .

[14]  Caine M. Finnerty,et al.  Carbon formation on and deactivation of nickel-based/zirconia anodes in solid oxide fuel cells running on methane , 1998 .

[15]  Hongpeng He,et al.  Carbon deposition on Ni/YSZ composites exposed to humidified methane , 2007 .

[16]  Raymond J. Gorte,et al.  Novel SOFC anodes for the direct electrochemical oxidation of hydrocarbons , 2003 .

[17]  Ayodeji Jeje,et al.  3D modeling of anode-supported planar SOFC with internal reforming of methane , 2007 .

[18]  Kohei Ito,et al.  Performance analysis of planar-type unit SOFC considering current and temperature distributions , 2000 .