Compensation of induced vibrations by commanded counter motions in kinematic redundant feed drive systems

This paper presents an approach using kinematic redundant actuators for the enhancement of machining performance in terms of productivity and accuracy. Unfortunately, induced vibrations in the structure due to jerk impose limitations on the acceleration and deceleration profiles. With the aid of kinematic redundancy, an inverse modeling algorithm is developed and exploited in this investigation as a method to compensate the unwanted vibrations in an assembly with two collinearly arranged axes. A compact model of the system is designed to study the effectiveness of the proposed method. Verification of the obtained results is done on an experimental test bench.

[1]  M. G. A. Nassef,et al.  Simulation-based parameter identification of a reduced model using neural networks , 2011, 2011 9th IEEE International Conference on Control and Automation (ICCA).

[2]  R. Whalley,et al.  Analysis, modeling and simulation of stiffness in machine tool drives , 2000 .

[3]  Sung-Chong Chung,et al.  A systematic approach to design high-performance feed drive systems , 2005 .

[4]  Claudio Melchiorri,et al.  Trajectory Planning for Automatic Machines and Robots , 2010 .

[5]  P.H. Meckl,et al.  Optimized s-curve motion profiles for minimum residual vibration , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[6]  Huaizhong Li,et al.  Motion profile planning for reduced jerk and vibration residuals , 2007 .

[7]  I. Chen,et al.  Planning algorithms for s-curve trajectories , 2007, 2007 IEEE/ASME international conference on advanced intelligent mechatronics.

[8]  Cyril M. Harris,et al.  Shock and vibration handbook , 1976 .

[9]  Bin Li,et al.  Adaptive Notch Filter Control for the Torsion Vibration in Lead-Screw Feed Drive System Based on Neural Network , 2008, ICIRA.

[10]  Kaan Erkorkmaz,et al.  Accurate tracking controller design for high-speed drives , 2007 .

[11]  George Ellis,et al.  Control system design guide : a practical guide , 2004 .

[12]  Chin-Yin Chen,et al.  Integrated design for a mechatronic feed drive system of machine tools , 2005, Proceedings, 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics..

[13]  Yoram Koren,et al.  Control of Machine Tools , 1997 .

[14]  Michael Valášek,et al.  Study of Concepts of Parallel Kinematics Machines for Advanced Manufacturing , 2005 .

[15]  Pierre-Jean Barre,et al.  Influence of High-Speed Machine Tool Control Parameters on the Contouring Accuracy. Application to Linear and Circular Interpolation , 2004, J. Intell. Robotic Syst..

[16]  Berend Denkena,et al.  Energy optimized jerk-decoupling technology for translatory feed axes , 2009 .