Volatile Solvent Additives Enabling High-Efficiency Organic Solar Cells without Thermal Annealing

[1]  T. Anthopoulos,et al.  Trace Solvent Additives Enhance Charge Generation in Layer‐by‐Layer Coated Organic Solar Cells , 2022, Small Structures.

[2]  Hui Lin,et al.  Ternary organic solar cells with enhanced charge transfer and stability combining the advantages of polymer acceptors and fullerene acceptors , 2022, Organic Electronics.

[3]  Xiaowei Zhan,et al.  Morphology Control in Organic Solar Cells , 2018 .

[4]  Sung‐Ho Jin,et al.  A wide-bandgap π-conjugated polymer for high-performance ternary organic solar cells with an efficiency of 17.40% , 2021 .

[5]  Yongfang Li,et al.  Volatilizable Solid Additive‐Assisted Treatment Enables Organic Solar Cells with Efficiency over 18.8% and Fill Factor Exceeding 80% , 2021, Advanced materials.

[6]  Rongling Zhang,et al.  Improved Photovoltaic Performance of Polymer Solar Cells via a Volatile and Nonhalogen Additive to Optimize Crystallinity , 2021, ACS Applied Energy Materials.

[7]  Yanming Sun,et al.  High-efficiency organic solar cells with low voltage loss induced by solvent additive strategy , 2021, Matter.

[8]  H. Ade,et al.  A Chlorinated Donor Polymer Achieving High‐Performance Organic Solar Cells with a Wide Range of Polymer Molecular Weight , 2021, Advanced Functional Materials.

[9]  Liming Ding,et al.  18.69% PCE from organic solar cells , 2021, Journal of Semiconductors.

[10]  Ling Hong,et al.  Crumple Durable Ultraflexible Organic Solar Cells with an Excellent Power‐per‐Weight Performance , 2021, Advanced Functional Materials.

[11]  Weiwei Li,et al.  Fullerene as an additive for increasing the efficiency of organic solar cells to more than 17. , 2021, Journal of colloid and interface science.

[12]  F. Gao,et al.  All‐polymer solar cells with over 16% efficiency and enhanced stability enabled by compatible solvent and polymer additives , 2021, Aggregate.

[13]  Fujun Zhang,et al.  Rational compatibility in a ternary matrix enables all-small-molecule organic solar cells with over 16% efficiency , 2021, Energy & Environmental Science.

[14]  A. Jen,et al.  Technical Challenges and Perspectives for the Commercialization of Solution‐Processable Solar Cells , 2021, Advanced Materials Technologies.

[15]  Zhenhua Chen,et al.  Morphology optimization of organic solar cells enabled by interface engineering of zinc oxide layer with a conjugated organic material , 2021 .

[16]  Fujun Zhang,et al.  Semitransparent organic solar cells exhibiting 13.02% efficiency and 20.2% average visible transmittance , 2021 .

[17]  Yuze Lin,et al.  An Electron Acceptor Analogue for Lowering Trap Density in Organic Solar Cells , 2021, Advanced materials.

[18]  Ailing Tang,et al.  Recent advances in PM6:Y6-based organic solar cells , 2021 .

[19]  Oskar J. Sandberg,et al.  A History and Perspective of Non‐Fullerene Electron Acceptors for Organic Solar Cells , 2021, Advanced Energy Materials.

[20]  Liming Ding,et al.  D18, an eximious solar polymer! , 2021 .

[21]  Yamin Zhang,et al.  Solid Additives in Organic Solar Cells: Progress and Perspective , 2021, Journal of Materials Chemistry C.

[22]  Felix Mayr,et al.  Understanding the low voltage losses in high-performance non-fullerene acceptor-based organic solar cells , 2021, Materials Advances.

[23]  K. Leo,et al.  Organic Solar Cells—The Path to Commercial Success , 2020, Advanced Energy Materials.

[24]  Q. Burlingame,et al.  It’s time to focus on organic solar cell stability , 2020, Nature Energy.

[25]  Hui Lin,et al.  An universal morphology regulator for efficient and stable nonfullerene organic solar cells by π–π interaction , 2020 .

[26]  Yongfang Li,et al.  Random terpolymer based on thiophene-thiazolothiazole unit enabling efficient non-fullerene organic solar cells , 2020, Nature Communications.

[27]  H. Ade,et al.  Low Temperature Aggregation Transitions in N3 and Y6 Acceptors Enable Double‐Annealing Method That Yields Hierarchical Morphology and Superior Efficiency in Nonfullerene Organic Solar Cells , 2020, Advanced Functional Materials.

[28]  Tao Yang,et al.  A compatible polymer acceptor enables efficient and stable organic solar cells as a solid additive , 2020 .

[29]  H. Ade,et al.  Thermodynamic Properties and Molecular Packing Explain Performance and Processing Procedures of Three D18:NFA Organic Solar Cells , 2020, Advanced materials.

[30]  J. Chu,et al.  A Universal Method to Enhance Flexibility and Stability of Organic Solar Cells by Constructing Insulating Matrices in Active Layers , 2020, Advanced Functional Materials.

[31]  Takao Someya,et al.  The Future of Flexible Organic Solar Cells , 2020, Advanced Energy Materials.

[32]  Seyed Mehrdad Hosseini,et al.  Extraordinarily long diffusion length in PM6:Y6 organic solar cells , 2020, Journal of Materials Chemistry A.

[33]  L. Meng,et al.  Highly Efficient All‐Small‐Molecule Organic Solar Cells with Appropriate Active Layer Morphology by Side Chain Engineering of Donor Molecules and Thermal Annealing , 2020, Advanced materials.

[34]  Shangfeng Yang,et al.  Progress of the key materials for organic solar cells , 2020, Science China Chemistry.

[35]  Yongfang Li,et al.  A “σ-Hole”-Containing Volatile Solid Additive Enabling 16.5% Efficiency Organic Solar Cells , 2020, iScience.

[36]  A. Jen,et al.  Graphdiyne Derivative as Multifunctional Solid Additive in Binary Organic Solar Cells with 17.3% Efficiency and High Reproductivity , 2020, Advanced materials.

[37]  Yong Cao,et al.  Interface-enhanced organic solar cells with extrapolated T80 lifetimes of over 20 years. , 2020, Science bulletin.

[38]  Wenkai Zhong,et al.  Achieving Efficient Thick Film All-polymer Solar Cells Using a Green Solvent Additive , 2019, Chinese Journal of Polymer Science.

[39]  Jikang Liu,et al.  Efficient non-fullerene organic solar cells based on thickness-insensitive conjugated small molecule cathode interface , 2019, Solar Energy.

[40]  Yufei Wang,et al.  Self-doping n-type polymer as a cathode interface layer enables efficient organic solar cells by increasing built-in electric field and boosting interface contact , 2019, Journal of Materials Chemistry C.

[41]  Thuc‐Quyen Nguyen,et al.  Quantifying the Nongeminate Recombination Dynamics in Nonfullerene Bulk Heterojunction Organic Solar Cells , 2019, Advanced Energy Materials.

[42]  Hongzheng Chen,et al.  Simple non-fused electron acceptors for efficient and stable organic solar cells , 2019, Nature Communications.

[43]  Jacek Ulanski,et al.  Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core , 2019, Joule.

[44]  Jie Zhu,et al.  Design and application of volatilizable solid additives in non-fullerene organic solar cells , 2018, Nature Communications.

[45]  A. Facchetti,et al.  Performance, Morphology, and Charge Recombination Correlations in Ternary Squaraine Solar Cells , 2018 .

[46]  Jingwen Zhang,et al.  Organic Solar Cell Materials toward Commercialization. , 2018, Small.

[47]  Yong Cao,et al.  Overcoming Space‐Charge Effect for Efficient Thick‐Film Non‐Fullerene Organic Solar Cells , 2018, Advanced Energy Materials.

[48]  M. Toney,et al.  Solvent Additives: Key Morphology‐Directing Agents for Solution‐Processed Organic Solar Cells , 2018, Advanced materials.

[49]  F. Huang,et al.  Engineering the morphology via processing additives in multiple all-polymer solar cells for improved performance , 2018 .

[50]  C. Brabec,et al.  Overcoming Microstructural Limitations in Water Processed Organic Solar Cells by Engineering Customized Nanoparticulate Inks , 2018 .

[51]  M. B. Upama,et al.  Effect of annealing dependent blend morphology and dielectric properties on the performance and stability of non-fullerene organic solar cells , 2018 .

[52]  Jianyu Yuan,et al.  High efficiency all-polymer solar cells realized by the synergistic effect between the polymer side-chain structure and solvent additive , 2015 .

[53]  John A. Carr,et al.  Low-boiling-point solvent additives can also enable morphological control in polymer solar cells , 2013 .

[54]  Meng-Huan Jao,et al.  Additives for morphology control in high-efficiency organic solar cells , 2013 .