Nonuniform catalyst distribution for inorganic membrane reactors: Theoretical considerations and preparation techniques

Abstract The performance characteristics of an inert membrane reactor with catalyst on the feed side (IMRCF), a catalytic membrane reactor (CMR), and a fixed-bed reactor (FBR) are compared for uniform and Dirac-type catalyst distributions for the case of a first-order reversible reaction under isothermal conditions. It is demonstrated that for all three reactor types, a Dirac delta distribution of catalyst, located at the external surface (feed side) in either the membrane (CMR) or the pellet (IMRCF and FBR) gives superior performance as compared to the uniformly distributed case. In addition, for the IMRCF, the case of an arbitrary number of reactions following arbitrary kinetics under steady-state nonisothermal conditions, with finite external mass and heat transfer resistances for both the pellet and the inert membrane, is considered. It is shown analytically that in the realistic case where the local catalyst loading is bounded, the optimal distribution of catalyst is in general a multiple step function. As the bound increases, the step function approaches a Dirac delta distribution. Novel preparation techniques for supported thin metal composite membranes for IMRCF applications and inorganic membranes with nonuniform distribution of catalyst for CMRs are also described. The first technique employs electroless plating along with osmotic pressure to yield supported thin membranes of controlled microstructure, porosity and thickness. The preparation of silver films deposited on commercial alumina membrane is presented as an example. Heat treatment in oxygen demonstrates that Ag/alumina membranes thus prepared are thermally more stable than similar membranes prepared using standard electroless plating procedures. In the second technique, using sequential slip-casting of inert and platinum impregnated alumina sols, precise control of the catalyst layer thickness and location within the alumina membrane is obtained.

[1]  M. Morbidelli,et al.  Optimal catalyst acitivity profiles in pellets—VIII. General nonisothermal reacting systems with arbitrary kinetics , 1990 .

[2]  Massimo Morbidelli,et al.  Optimal catalyst activity profiles in Pellets—X. The role of catalyst loading , 1993 .

[3]  Yi-Ming Sun,et al.  A catalytic membrane reactor: its performance in comparison with other types of reactors , 1990 .

[4]  M. Ermilova,et al.  Preparation and catalysis over palladium composite membranes , 1993 .

[5]  Mikio Konno,et al.  A composite palladium and porous aluminum oxide membrane for hydrogen gas separation , 1988 .

[6]  Bernard P. A. Grandjean,et al.  Simultaneous deposition of Pd and Ag on porous stainless steel by electroless plating , 1993 .

[7]  Evaluation of palladium-impregnation on the performance of a Vycor glass catalytic membrane reactor , 1992 .

[8]  Costas J. Spanos,et al.  Advanced process control , 1989 .

[9]  Arthur E. Bryson,et al.  Applied Optimal Control , 1969 .

[10]  N. Sato,et al.  A Palladium/Porous-Glass Composite Membrane for Hydrogen Separation , 1988 .

[11]  J. Way,et al.  Preparation and characterization of a composite palladium-ceramic membrane , 1993 .

[12]  Yi-Ming Sun,et al.  Catalytic membrane for simultaneous chemical reaction and separation applied to a dehydrogenation reaction , 1988 .

[13]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .

[14]  J. Keller,et al.  Optimal Catalyst Distribution in a Membrane , 1984 .

[15]  R. G. Minet,et al.  A high temperature catalytic membrane reactor for ethane dehydrogenation , 1990 .

[16]  N. Itoh,et al.  A membrane reactor using palladium , 1987 .

[17]  Arvind Varma,et al.  Novel preparation techniques for thin metal-ceramic composite membranes , 1995 .

[18]  R. Govind,et al.  Development of a composite palladium membrane for selective hydrogen separation at high temperature , 1991 .

[19]  Asterios Gavriilidis,et al.  Optimal Distribution of Catalyst in Pellets , 1993, Computer-Aided Design of Catalysts.

[20]  A. J. Burggraaf,et al.  The preparation and characterization of alumina membranes with ultrafine pores: 2. The formation of supported membranes , 1985 .