Wear phenomenon in the hard steel machining using ceramic tools

[1]  W. Grzesik,et al.  Surface finish generated in hard turning of quenched alloy steel parts using conventional and wiper ceramic inserts , 2006 .

[2]  A. Dutta,et al.  Progressive flank wear and machining performance of silver toughened alumina cutting tool inserts , 2006 .

[3]  A. Senthil Kumar,et al.  Wear behaviour of alumina based ceramic cutting tools on machining steels , 2006 .

[4]  G. Boothroyd,et al.  Fundamentals of machining and machine tools , 2006 .

[5]  W. Grzesik,et al.  Comparative assessment of surface roughness produced by hard machining with mixed ceramic tools including 2D and 3D analysis , 2005 .

[6]  Ekkard Brinksmeier,et al.  Capability Profile of Hard Cutting and Grinding Processes , 2005 .

[7]  A. Abrão,et al.  Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools , 2003 .

[8]  Y. Kevin Chou.  Hard turning of M50 steel with different microstructures in continuous and intermittent cutting , 2003 .

[9]  Berend Denkena,et al.  Advancing Cutting Technology , 2003 .

[10]  Y. K. Chou,et al.  Experimental investigation on CBN turning of hardened AISI 52100 steel , 2002 .

[11]  Gerry Byrne,et al.  Cutting tool wear in the machining of hardened steels , 2001 .

[12]  Gerry Byrne,et al.  Cutting tool wear in the machining of hardened steels: Part I: alumina/TiC cutting tool wear , 2001 .

[13]  Hans Kurt Tönshoff,et al.  Cutting of Hardened Steel , 2000 .

[14]  J. Y. Wang,et al.  The Effect of Tool Flank Wear on the Heat Transfer, Thermal Damage and Cutting Mechanics in Finish Hard Tuning , 1999 .

[15]  Y. Kevin Chou,et al.  Tool wear mechanism in continuous cutting of hardened tool steels , 1997 .

[16]  Jiajun Liu,et al.  The computer simulation of the temperature distribution on the surface of ceramic cutting tools , 1997 .

[17]  V. F. Ruisi,et al.  Wear rates and wear mechanisms of alumina-based tools cutting steel at a low cutting speed , 1997 .

[18]  Toshiyuki Obikawa,et al.  Wear characteristic of alumina coated and alumina ceramic tools , 1997 .

[19]  Soon Chong Johnson Lim,et al.  Transitions in wear mechanisms of alumina cutting tools , 1996 .

[20]  Gwidon Stachowiak,et al.  Wear Behaviour of Ceramic Cutting-Tools , 1994 .

[21]  Yuji Katsumura,et al.  Effects of TiC Content and Grain Size on Cutting Performance of Al2O3-TiC Ceramic Tools , 1993 .

[22]  W. König,et al.  Turning versus grinding: a comparison of surface integrity aspects and attainable accuracies , 1993 .

[23]  I. Hutchings.  Tribology: Friction and Wear of Engineering Materials , 1992 .

[24]  X. Hong,et al.  Wear behaviour and wear mechanism of ceramic tools in machining hardened alloy steel , 1990 .

[25]  M. Mikus,et al.  The formation of protective layers when machining steel with ceramic cutting tools , 1987 .

[26]  G. Brandt,et al.  Flank and crater wear mechanisms of alumina-based cutting tools when machining steel , 1986 .