XPS Analysis of Carbon Fiber Surfaces-Anodized and Interfacial Effects in Fiber-Epoxy Composites.

High strength carbon fibers were electrochemically treated in an aqueous ammonium carbonate solution, with increasing electric current density, using an original continuous treatment process. The electrochemical treatment induced a modification of the surface properties, i.e., surface functional groups as observed by XPS. As a result, the O1s/C1s and the N1s/C1s ratios of the fiber surfaces increased with the increase of current intensity of the electrochemical treatment in the interval of about 30-50 A m-2. However, no significant change in the surface functional activity characters was observed for strong treatments. Hence, a moderate treatment (30 A m-2) was sufficient to obtain optimum (O1s + N1s)/C1s ratios in this system. This treatment is possibly suitable for carbon fibers to be incorporated in a polar organic matrix, resulting in increasing the interlaminar shear strength (ILSS) of the resulting composites. Copyright 1999 Academic Press.

[1]  Park,et al.  Anodic Surface Treatment on Carbon Fibers: Determination of Acid-Base Interaction Parameter between Two Unidentical Solid Surfaces in a Composite System. , 1998, Journal of colloid and interface science.

[2]  Soojin Park,et al.  Bending fracture and acoustic emission studies on carbon–carbon composites: effect of sizing treatment on carbon fibres , 1998 .

[3]  K. J. Hüttinger,et al.  Surface-oxidized carbon fibers: I. Surface structure and chemistry , 1996 .

[4]  J. Donnet,et al.  The effect of electrochemical surface treatments of carbon fibers using scanning tunneling microscopy , 1994 .

[5]  D. Blackketter,et al.  Evaluation of fiber surfaces treatment and sizing on the shear and transverse tensile strengths of carbon fiber-reinforced thermoset and thermoplastic matrix composites , 1993 .

[6]  Lawrence T. Drzal,et al.  Fibre-matrix adhesion and its relationship to composite mechanical properties , 1993 .

[7]  Tse-Hao Ko.  Characterization of PAN-based nonburning (nonflammable) fibers , 1993 .

[8]  L. Lavielle,et al.  The Role of the Interface in Carbon Fibre-Epoxy Composites , 1987 .

[9]  J. Watts,et al.  The use of XPS and labelling techniques to study the surface chemistry of carbon fibres , 1987 .

[10]  S. Neffe.  Effect of anodic oxidation of PAN-based carbon fibers on the morphological changes of their surfaces , 1987 .

[11]  P. Sherwood,et al.  X-ray photoelectron spectroscopic studies of carbon fibre surfaces vii-electrochemical treatment in ammonium salt electrolytes , 1986 .

[12]  Erich Fitzer,et al.  Carbon fibres and their composites , 1985 .

[13]  L. Drzal,et al.  Adhesion of Graphite Fibers to Epoxy Matrices: I. The Role of Fiber Surface Treatment , 1983 .

[14]  A. Proctor,et al.  X-ray photoelectron spectroscopic studies of carbon fibre surfaces. III—Industrially treated fibres and the effect of heat and exposure to oxygen , 1982 .