Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
暂无分享,去创建一个
[1] M. Era,et al. Polarized electroluminescence from oriented p‐sexiphenyl vacuum‐deposited film , 1995 .
[2] Martin A. Green,et al. Solar cell efficiency tables (version 39) , 2012 .
[3] Henry J. Snaith,et al. Estimating the Maximum Attainable Efficiency in Dye‐Sensitized Solar Cells , 2010 .
[4] Xudong Yang,et al. High-efficiency dye-sensitized solar cell with a novel co-adsorbent , 2012 .
[5] Tayfun Gokmen,et al. Device characteristics of a 10.1% hydrazine‐processed Cu2ZnSn(Se,S)4 solar cell , 2012 .
[6] Henry J. Snaith,et al. Facile infiltration of semiconducting polymer into mesoporous electrodes for hybrid solar cells , 2011 .
[7] M. Kanatzidis,et al. All-solid-state dye-sensitized solar cells with high efficiency , 2012, Nature.
[8] Juan Bisquert,et al. Chemical capacitance of nanostructured semiconductors: its origin and significance for nanocomposite solar cells , 2003 .
[9] Michael Grätzel,et al. The Effect of Hole Transport Material Pore Filling on Photovoltaic Performance in Solid‐State Dye‐Sensitized Solar Cells , 2011 .
[10] Cherie R. Kagan,et al. Organic-inorganic hybrid materials as semiconducting channels in thin-film field-effect transistors , 1999, Science.
[11] Ladislav Kavan,et al. Highly efficient semiconducting TiO2 photoelectrodes prepared by aerosol pyrolysis , 1995 .
[12] Michael Grätzel,et al. Porphyrin-Sensitized Solar Cells with Cobalt (II/III)–Based Redox Electrolyte Exceed 12 Percent Efficiency , 2011, Science.
[13] Michael Grätzel,et al. Pore‐Filling of Spiro‐OMeTAD in Solid‐State Dye Sensitized Solar Cells: Quantification, Mechanism, and Consequences for Device Performance , 2009 .
[14] Aram Amassian,et al. Hybrid passivated colloidal quantum dot solids. , 2012, Nature nanotechnology.
[15] Josef Salbeck,et al. Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies , 1998, Nature.
[16] Michael Grätzel,et al. Charge collection and pore filling in solid-state dye-sensitized solar cells , 2008, Nanotechnology.
[17] D. Mitzi,et al. Conducting tin halides with a layered organic-based perovskite structure , 1994, Nature.
[18] J. Hummelen,et al. Polymer Photovoltaic Cells: Enhanced Efficiencies via a Network of Internal Donor-Acceptor Heterojunctions , 1995, Science.
[19] Albrecht Poglitsch,et al. Dynamic disorder in methylammoniumtrihalogenoplumbates (II) observed by millimeter‐wave spectroscopy , 1987 .
[20] Gary Hodes,et al. Sb2S3-Sensitized Nanoporous TiO2 Solar Cells , 2009 .
[21] Jenny Nelson,et al. Continuous-time random-walk model of electron transport in nanocrystalline TiO 2 electrodes , 1999 .
[22] M. Ikegami,et al. Highly Luminescent Lead Bromide Perovskite Nanoparticles Synthesized with Porous Alumina Media , 2012 .
[23] U. Wiesner,et al. Control of Solid‐State Dye‐Sensitized Solar Cell Performance by Block‐Copolymer‐Directed TiO2 Synthesis , 2010 .
[24] M. Grätzel,et al. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.
[25] Michael Grätzel,et al. Tris(2-(1H-pyrazol-1-yl)pyridine)cobalt(III) as p-type dopant for organic semiconductors and its application in highly efficient solid-state dye-sensitized solar cells. , 2011, Journal of the American Chemical Society.
[26] Henry J. Snaith,et al. How should you measure your excitonic solar cells , 2012 .
[27] Ishihara,et al. Optical properties due to electronic transitions in two-dimensional semiconductors (CnH2n+1NH3)2PbI4. , 1990, Physical review. B, Condensed matter.
[28] Choong-Sun Lim,et al. Panchromatic photon-harvesting by hole-conducting materials in inorganic-organic heterojunction sensitized-solar cell through the formation of nanostructured electron channels. , 2012, Nano letters.
[29] G. Boschloo,et al. Photoinduced absorption spectroscopy as a tool in the study of dye-sensitized solar cells , 2008 .
[30] C. A. Walsh,et al. Efficient photodiodes from interpenetrating polymer networks , 1995, Nature.
[31] Henry J. Snaith,et al. The renaissance of dye-sensitized solar cells , 2012, Nature Photonics.
[32] David B Mitzi,et al. High‐Efficiency Solar Cell with Earth‐Abundant Liquid‐Processed Absorber , 2010, Advanced materials.
[33] Donald Fitzmaurice,et al. Spectroscopy of conduction band electrons in transparent metal oxide semiconductor films: optical determination of the flatband potential of colloidal titanium dioxide films , 1992 .
[34] Shijun Jia,et al. Polymer–Fullerene Bulk‐Heterojunction Solar Cells , 2009, Advanced materials.
[35] J. Ashby. References and Notes , 1999 .
[36] David B. Mitzi,et al. Electroluminescence from an Organic−Inorganic Perovskite Incorporating a Quaterthiophene Dye within Lead Halide Perovskite Layers , 1999 .
[37] Nam-Gyu Park,et al. 6.5% efficient perovskite quantum-dot-sensitized solar cell. , 2011, Nanoscale.
[38] J. Bloking,et al. Hole transport materials with low glass transition temperatures and high solubility for application in solid-state dye-sensitized solar cells. , 2012, ACS nano.
[39] Tsutomu Miyasaka,et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. , 2009, Journal of the American Chemical Society.
[40] H. Snaith,et al. Pore Filling of Spiro‐OMeTAD in Solid‐State Dye‐Sensitized Solar Cells Determined Via Optical Reflectometry , 2012 .