Seat Adjustment Design of an Intelligent Robotic Wheelchair Based on the Stewart Platform

A wheelchair user makes direct contact with the wheelchair seat, which serves as the interface between the user and the wheelchair, for much of any given day. Seat adjustment design is of crucial importance in providing proper seating posture and comfort. This paper presents a multiple-DOF (degrees of freedom) seat adjustment mechanism, which is intended to increase the independence of the wheelchair user while maintaining a concise structure, light weight, and intuitive control interface. This four-axis Stewart platform is capable of heaving, pitching, and swaying to provide seat elevation, tilt-in-space, and sideways movement functions. The geometry and types of joints of this mechanism are carefully arranged so that only one actuator needs to be controlled, enabling the wheelchair user to adjust the seat by simply pressing a button. The seat is also equipped with soft pressure-sensing pads to provide pressure management by adjusting the seat mechanism once continuous and concentrated pressure is detected. Finally, by comparing with the manual wheelchair, the proposed mechanism demonstrated the easier and more convenient operation with less effort for transfer assistance.

[1]  Michael Blum,et al.  Design of a Hexapod Motion Cueing System for the NASA Ames Vertical Motion Simulator , 2002 .

[2]  Brandstater Me,et al.  Efficacy of three measures to relieve pressure in seated persons with spinal cord injury , 1994 .

[3]  Stephen Sprigle,et al.  Physiologic effects and design considerations of tilt and recline wheelchairs , 1997 .

[4]  Inhyuk Moon,et al.  Design of seat mechanism for multi-posture-controllable wheelchair , 2008, 2008 International Conference on Control, Automation and Systems.

[5]  Shirley G Fitzgerald,et al.  Preliminary assessment of a prototype advanced mobility device in the work environment of veterans with spinal cord injury. , 2004, NeuroRehabilitation.

[6]  Atsuo Takanishi,et al.  Walking up and down stairs carrying a human by a biped locomotor with parallel mechanism , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[7]  G. Borg.  Perceived exertion as an indicator of somatic stress. , 2019, Scandinavian journal of rehabilitation medicine.

[8]  C J Newsam,et al.  Electromyographic analysis of the shoulder muscles during depression transfers in subjects with low-level paraplegia. , 1996, Archives of physical medicine and rehabilitation.

[9]  Rory A. Cooper,et al.  Design features that affect the maneuverability of wheelchairs and scooters. , 2010, Archives of physical medicine and rehabilitation.

[10]  Chung-Hsien Kuo,et al.  Development of a seat-adjustable power wheelchair , 2011, Proceedings 2011 International Conference on System Science and Engineering.

[11]  Volker Urban,et al.  A Stewart platform for precision surgery , 2003 .

[12]  Yung Ting,et al.  Modeling and Control for a Gough-Stewart Platform CNC Machine , 2004, ICRA.

[13]  Julianna Arva,et al.  RESNA Position on the Application of Seat-Elevating Devices for Wheelchair Users , 2009, Assistive technology : the official journal of RESNA.

[14]  James S. Albus,et al.  Robotic Patient Transfer and Rehabilitation Device for Patient Care Facilities or the Home , 2008, Adv. Robotics.

[15]  S. Burns,et al.  Seating pressures with conventional and dynamic wheelchair cushions in tetraplegia. , 1999, Archives of physical medicine and rehabilitation.

[16]  R. Simpson.  Smart wheelchairs: A literature review. , 2005, Journal of rehabilitation research and development.

[17]  Mary M Rodgers,et al.  Scapular kinematics during transfers in manual wheelchair users with and without shoulder impingement. , 2005, Clinical biomechanics.

[18]  Dan Ding,et al.  Usage of tilt-in-space, recline, and elevation seating functions in natural environment of wheelchair users. , 2008, Journal of rehabilitation research and development.

[19]  Rory A Cooper,et al.  Multiple sclerosis and mobility-related assistive technology: systematic review of literature. , 2010, Journal of rehabilitation research and development.

[20]  M. Wada.  A 4WD omnidirectional wheelchair with a chair tilting system , 2008, 2008 IEEE International Conference on Mechatronics and Automation.

[21]  D. Stewart.  A Platform with Six Degrees of Freedom , 1965 .

[22]  May Stinson,et al.  Measuring interface pressure: a laboratory-based investigation into the effects of repositioning and sitting. , 2002, The American journal of occupational therapy : official publication of the American Occupational Therapy Association.

[23]  Chris Maurer,et al.  Monitoring Power Upright and Tilt-In-Space Wheelchair Use , 2006 .

[24]  M. Boninger,et al.  Assessing mobility characteristics and activity levels of manual wheelchair users. , 2007, Journal of rehabilitation research and development.

[25]  J. M. Collins.  Tetraplegia and paraplegia. A guide for physiotherapists , 1986 .

[26]  Tariq Rahman,et al.  IROS special session on "Service robots for the disabled and elderly". A technique for robotic assisted transfer for people with motor difficulties , 1994, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'94).

[27]  Stephen Sprigle,et al.  Characterization of power wheelchair use in the home and community. , 2008, Archives of physical medicine and rehabilitation.

[28]  H Hirschfeld,et al.  Transfer from table to wheelchair in men and women with spinal cord injury: coordination of body movement and arm forces , 2007, Spinal Cord.

[29]  Daisuke Chugo,et al.  Depressurization assistance according to a posture of a seated patient , 2011, 2011 4th International Conference on Human System Interactions, HSI 2011.

[30]  Alicia M Koontz,et al.  Upper limb kinetic analysis of three sitting pivot wheelchair transfer techniques. , 2011, Clinical biomechanics.

[31]  Martha Freeman Somers,et al.  Spinal Cord Injury: Functional Rehabilitation , 1992 .

[32]  M. Graf,et al.  An assessment of seated activity and postures at five workplaces , 1995 .

[33]  David P. Miller,et al.  Design and testing of a low-cost robotic wheelchair prototype , 1995, Auton. Robots.

[34]  J B Redford,et al.  Seating and wheeled mobility in the disabled elderly population. , 1993, Archives of physical medicine and rehabilitation.

[35]  Dana Reeve Foundation,et al.  Pressure ulcer prevention and treatment following spinal cord injury: a clinical practice guideline for health-care professionals. , 2001, The journal of spinal cord medicine.

[36]  Yeh-Liang Hsu,et al.  DEVELOPMENT OF A PARALLEL SURGICAL ROBOT WITH AUTOMATIC BONE DRILLING CARRIAGE FOR STEREOTACTIC NEUROSURGERY , 2007 .

[37]  J. Dansereau,et al.  Analysis of sliding and pressure distribution during a repositioning of persons in a simulator chair , 2001, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[38]  Jean Dansereau,et al.  Powered Tilt/Recline Systems: Why and How Are They Used? , 2003, Assistive technology : the official journal of RESNA.