Microstructure and high-temperature mechanical properties of co-continuous (Ti3AlC2+ Al3Ti)/2024Al composite fabricated by pressureless infiltration

[1]  Qun Yu,et al.  Preparation and characteristics of Ti3AlC2 -Al3Ti/Al composite materials synthesized from pure Al and Ti3AlC2 powders , 2021, Materials Characterization.

[2]  Z. Fan,et al.  Enhanced mechanical properties of 6082 aluminum alloy via SiC addition combined with squeeze casting , 2021 .

[3]  A. Senthilkumar,et al.  Experimental investigations on mechanical properties of Al-B4C metal matrix composites , 2021 .

[4]  M. Rainforth,et al.  Synthesis and high temperature corrosion behaviour of nearly monolithic Ti3AlC2 MAX phase in molten chloride salt , 2020, Corrosion Science.

[5]  T. B. Rao.  Microstructural, mechanical, and wear properties characterization and strengthening mechanisms of Al7075/SiCnp composites processed through ultrasonic cavitation assisted stir-casting , 2020, Materials Science and Engineering: A.

[6]  Hongjie Wang,et al.  Thermal shock behavior of co-continuous TiCx-Cu cermets in air and anaerobic environment , 2020 .

[7]  Wenqiang Hu,et al.  Layered ternary MAX phases and their MX particulate derivative reinforced metal matrix composite:A review , 2020 .

[8]  P. Gurusamy,et al.  Mechanical properties and dry sliding wear behaviour of Al2219 alloy reinforced with TiB2 composites by stir casting route , 2020 .

[9]  Kanmani Subbu Subbian,et al.  Enhanced mechanical properties of AA6061-B4C composites developed by a novel ultra-sonic assisted stir casting , 2020 .

[10]  L.Hu,et al.  Compressive performance and crack propagation in Al alloy/Ti2AlC composites , 2019, 1908.08757.

[11]  M. Imran,et al.  Characterization of Al-7075 metal matrix composites: a review , 2019, Journal of Materials Research and Technology.

[12]  L.C. Zhang,et al.  Design, microstructure and high temperature properties of in-situ Al3Ti and nano-Al2O3 reinforced 2024Al matrix composites from Al-TiO2 system , 2019, Journal of Alloys and Compounds.

[13]  Xiao-yu Wu,et al.  Al alloy/Ti 3 SiC 2 composites fabricated by pressureless infiltration with melt-spun Al alloy ribbons , 2017 .

[14]  W. Wang,et al.  Modelling of carbon nanotube dispersion and strengthening mechanisms in Al matrix composites prepared by high energy ball milling-powder metallurgy method , 2017 .

[15]  Xiaoguo Song,et al.  Effect of initial Ti powders size on the microstructures and mechanical properties of Al3Ti/2024 Al composites prepared by ultrasonic assisted in-situ casting , 2017 .

[16]  F. Jiang,et al.  Microstructure and mechanical properties of intermetallic Al3Ti alloy with residual aluminum , 2016 .

[17]  G. Proust,et al.  High-Performance Metal/Carbide Composites with Far-From-Equilibrium Compositions and Controlled Microstructures , 2016, Scientific Reports.

[18]  R. Purohit,et al.  Influence of Ultrasonic Assisted Stir Casting on Mechanical Properties of Al6061-nano Al2O3 Composites , 2015 .

[19]  Jiwen Li,et al.  Hot deformation behaviors of 35%SiCp/2024Al metal matrix composites , 2014 .

[20]  P. Tang,et al.  Uniaxial loading response of one dimensional long period structures of Al3Ti , 2014 .

[21]  J. Bonneville,et al.  Microstructural characterization and compression properties of TiC0.61/Cu(Al) composite synthesized from Cu and Ti3AlC2 powders , 2014 .

[22]  Ruixiao Zheng,et al.  Fabrication and characterization of hybrid structured Al alloy matrix composites reinforced by high volume fraction of B4C particles , 2014 .

[23]  J. Bonneville,et al.  Powder metallurgy processing and compressive properties of Ti3AlC2/Al composites , 2011 .

[24]  Yanchun Zhou,et al.  Layered Machinable and Electrically Conductive Ti2AlC and Ti3AlC2 Ceramics: a Review , 2010 .

[25]  Mingzhi Wang,et al.  Preparation of Ti3AlC2 by mechanically activated sintering with Sn aids , 2009 .

[26]  Jiaoqun Zhu,et al.  Fabrication of high-purity ternary carbide Ti3AlC2 by spark plasma sintering (SPS) technique , 2007 .

[27]  L. Geng,et al.  Compressive behaviour of Al-based hybrid composites reinforced with SiC whiskers and SiC nanoparticles , 2007 .

[28]  M. Kok,et al.  Production and mechanical properties of Al2O3 particle-reinforced 2024 aluminium alloy composites , 2005 .

[29]  Wu Gaohui,et al.  TiB2P/Al composite fabricated by squeeze casting technology , 2004 .

[30]  D. Jia.  Influence of SiC particulate size on the microstructural evolution and mechanical properties of Al–6Ti–6Nb matrix composites , 2000 .

[31]  Michel W. Barsoum,et al.  The MN+1AXN phases: A new class of solids , 2000 .

[32]  P. Bridges.  High-temperature ordered intermetallic alloys, C.C. Koch, C.T. Liu, N.S. Stoloff (Eds.). Materials Research Society, Amsterdam, Netherlands (1985), 560, ISBN: 0 931837 04 9 , 1986 .