Achievement of a near-perfect smooth silicon surface

[1]  Zhitang Song,et al.  Effect of hydrogen peroxide concentration on surface micro- roughness of silicon wafer after final polishing , 2011 .

[2]  Eric Armour,et al.  Blue LED growth from 2 inch to 8 inch , 2011 .

[3]  Jianbin Luo,et al.  Performance of Sodium Dodecyl Sulfate in Slurry with Glycine and Hydrogen Peroxide for Copper-Chemical Mechanical Polishing , 2010 .

[4]  Jianbin Luo,et al.  Dynamic phase transformation of crystalline silicon under the dry and wet impact studied by molecular dynamics simulation , 2010 .

[5]  Liangchi Zhang,et al.  Dependence of pad performance on its texture in polishing mono-crystalline silicon wafers , 2010 .

[6]  Xinchun Lu,et al.  Monoatomic layer removal mechanism in chemical mechanical polishing process: A molecular dynamics study , 2010 .

[7]  M. Krumrey,et al.  Effects of dielectric barrier discharges on silicon surfaces: Surface roughness, cleaning, and oxidation , 2009 .

[8]  Jianbin Luo,et al.  Extrusion formation mechanism on silicon surface under the silica cluster impact studied by molecular dynamics simulation , 2008 .

[9]  Chenhui Zhang,et al.  Effect of Nanoparticle Impact on Material Removal , 2008 .

[10]  Xiaolan Song,et al.  Effects of Polishing Pressure on Electrochemical Characteristics of Silicon Wafers during CMP , 2008 .

[11]  Jianbin Luo,et al.  The crystallographic change in sub-surface layer of the silicon single crystal polished by chemical mechanical polishing , 2007 .

[12]  J. Xu,et al.  Atomic scale deformation in the solid surface induced by nanoparticle impacts , 2005 .

[13]  L. J. Giling,et al.  Anisotropic Etching of Crystalline Silicon in Alkaline Solutions , 2005 .

[14]  John McGrath,et al.  Polishing pad surface characterisation in chemical mechanical planarisation , 2004 .

[15]  Ara Philipossian,et al.  Determining the Effects of Slurry Surfactant, Abrasive Size, and Abrasive Content on the Tribology and Kinetics of Copper CMP , 2003 .

[16]  I. Zarudi,et al.  Deformation and material removal rate in polishing silicon wafers , 2003 .

[17]  Fang Wang,et al.  Investigation on the final polishing slurry and technique of silicon substrate in ULSI , 2003 .

[18]  Brigid Mullany,et al.  The effect of slurry viscosity on chemical–mechanical polishing of silicon wafers , 2003 .

[19]  Ronald J. Gutmann,et al.  Pad porosity, compressibility and slurry delivery effects in chemical- mechanical planarization: modeling and experiments , 2000 .

[20]  B. Bhushan,et al.  Effects of particle size, polishing pad and contact pressure in free abrasive polishing , 1996 .

[21]  Y. Chabal,et al.  The atomic-scale removal mechanism during chemo-mechanical polishing of Si(100) and Si(111) , 1995 .

[22]  J. Wortman,et al.  Investigation of roughened silicon surfaces using fractal analysis. II. Chemical etching, rapid thermal chemical vapor deposition, and thermal oxidation , 1994 .

[23]  Philippe Dumas,et al.  SILICON ROUGHNESS INDUCED BY PLASMA ETCHING , 1994 .

[24]  E. Irene,et al.  Characterization of the Si/SiO2 interface morphology from quantum oscillations in Fowler–Nordheim tunneling currents , 1994 .

[25]  J. E. Griffith,et al.  Dimensional metrology with scanning probe microscopes , 1993 .

[26]  R. Barrett,et al.  Imaging polished sapphire with atomic force microscopy , 1990 .