Simulation of in-line versus staggered arrays of vented pallet boxes for assessing cooling performance of orange in cool storage.

The cooling performance of fruits and vegetables including transient heat removal, temperature homogeneity and moisture loss inside the cool storages is affected by pallet boxes arrangement. In this paper, the effect of two different types of vented pallet boxes arrangement including in-line and staggered on cooling performance were compared while longitudinal gaps between the pallet boxes and cooling airflow varied at three commonly applied levels. Validated computational fluid dynamics (CFD) models of airflow, heat and mass transfer were applied as an alternative for the experiments. Results showed that staggered array increased the surface heat transfer coefficient at the pallet boxes wall from 18% to 53%, which caused 28% to 38% reduction in ¾ cooling time compared to in-line. The most effectiveness of staggered array on heat transfer coefficient occurred for 0.25 m longitudinal gap between the pallet boxes. Staggered array did not improve temperature homogeneity and moisture loss. Results also showed that, an increment of longitudinal gaps from 0.1 to 0.25 m caused 10% reduction in ¾ cooling time. Increasing more than 0.25 m, did not showed reasonable improvement in cooling performance.

[1]  F. Dullien.  Porous Media: Fluid Transport and Pore Structure , 1979 .

[2]  Savvas A. Tassou,et al.  Modelling the environment within a wet air-cooled vegetable store , 1998 .

[3]  S. Touber,et al.  Distributed dynamic modelling of a refrigerated room , 1990 .

[4]  S. Mohtasebi,et al.  A Multi-Scale Three-Dimensional CFD Model of a Full Loaded Cool Storage , 2013 .

[5]  Chunjiang Zhao,et al.  Computational modeling of airflow and heat transfer in a vented box during cooling: Optimal package design , 2015 .

[6]  Tridib Kumar Goswami,et al.  Simulation of Transport Phenomena during Natural Convection Cooling of Bagged Potatoes in Cold Storage, Part II: Mass Transfer , 2006 .

[7]  David R. Gaskell,et al.  An introduction to transport phenomena in materials engineering , 2012 .

[8]  Refrigerating.  ASHRAE handbook of fundamentals , 1967 .

[9]  Tridib Kumar Goswami,et al.  Simulation of Transport Phenomena during Natural Convection Cooling of Bagged Potatoes in Cold Storage, Part I: Fluid Flow and Heat Transfer , 2006 .

[10]  S. Mohtasebi,et al.  Evaluation of a Cooling Performance of a Typical Full Loaded Cool Storage Using Mono-scale CFD Simulation , 2011 .

[11]  R. P. Singh,et al.  Design guidelines for the forced-air cooling process of strawberries , 2009 .

[12]  Martine Baelmans,et al.  Sensitivity of temperature and weight loss in the bulk of chicory roots with respect to process and product parameters , 2004 .

[13]  Muhammad M. Rahman,et al.  Numerical simulation of temperature and velocity in a refrigerated warehouse , 2010 .

[14]  Da-Wen Sun,et al.  Applications of computational fluid dynamics (cfd) in the food industry: a review , 2002 .

[15]  Martine Baelmans,et al.  CFD model of the airflow, heat and mass transfer in cool stores , 2005 .

[16]  Denis Flick,et al.  Modelling transport phenomena in refrigerated food bulks, packages and stacks: basics and advances , 2006 .

[17]  D. Flick,et al.  Numerical and experimental study of airflow in a typical refrigerated truck configuration loaded with pallets , 2002 .

[18]  R. P. Singh,et al.  Modeling the forced-air cooling process of fresh strawberry packages, Part I: Numerical model , 2009 .

[19]  Tridib Kumar Goswami,et al.  CFD simulation of effects of operating parameters and product on heat transfer and moisture loss in the stack of bagged potatoes , 2007 .

[20]  H. M. Hoang,et al.  Simplified heat transfer modeling in a cold room filled with food products , 2015 .

[21]  Bart Nicolai,et al.  Analysis of the air flow in a cold store by means of computational fluid dynamics , 2000 .

[22]  A. M. Foster,et al.  Measurement and prediction of air movement through doorways in refrigerated rooms , 2002 .

[23]  Weeratunge Malalasekera,et al.  An introduction to computational fluid dynamics - the finite volume method , 2007 .

[24]  Denis Flick,et al.  Air velocity characteristics within vented pallets loaded in a refrigerated vehicle with and without air ducts , 2009 .

[25]  Dean Burfoot,et al.  Predicting condensation in bulks of foodstuffs , 1999 .

[26]  H. M. Hoang,et al.  Experimental characterization of airflow, heat and mass transfer in a cold room filled with food products , 2014 .

[27]  H. M. Hoang,et al.  Preliminary study of airflow and heat transfer in a cold room filled with apple pallets: Comparison between two modelling approaches and experimental results , 2015 .

[28]  P. Verboven,et al.  Optimization of the humidification of cold stores by pressurized water atomizers based on a multiscale CFD model , 2009 .

[29]  Algebraic Model for Thermal Dispersion Heat Flux within Porous Media (R&D Note) , 2005 .

[30]  Dean Burfoot,et al.  Simulating the bulk storage of foodstuffs , 1999 .

[31]  E. Hallowell.  Cold and freezer storage manual , 1980 .

[32]  K. Schnitzlein,et al.  The influence of confining walls on the pressure drop in packed beds , 2001 .