Observations on the design and modelling of some joined thin-walled structural sections

In a recent experimental and analytical study for the axial progressive collapse of some thin-walled structural sections, no consistent reliability could be obtained for the prediction of crush parameters for different geometries and materials with an analytical approach that relied on a yield hinge model. Square and spot-welded top-hat sections were compared. This situation occurs because the assumed equivalence between the top-hat and square sections according to the yield hinge model of the folding structures, does not appear valid for the actual structures. Some of the dependences between the actual structure and the model are discussed, particularly for the top-hat geometry. Observations on a beneficial positioning of the spot-welds in a top-hat section are reported, and common recommendations for an optimum weld pitch are critically examined. Modes 1 and 2 deformations are identified for the well-known quasi-inextensional, regular (asymmetric) progressive folding of thin-walled sections having a rectangular (core) cross-section, such as square and top-hat sections. The deformation modes are characterized by different proportions of inward and outward movements of the material during folding. Possible implications for the stability of collapse and for the analytical formulae are indicated.

[1]  T. Wierzbicki,et al.  On the Crushing Mechanics of Thin-Walled Structures , 1983 .

[2]  Manuel S. Pereira,et al.  Crashworthiness of transportation systems : structural impact and occupant protection , 1997 .

[3]  Giovanni Belingardi,et al.  DYNAMIC AXIAL CRUSHING OF TRIGGERED ALUMINIUM THIN-WALLED COLUMNS , 1997 .

[4]  Mark White,et al.  Experimental quasi-static axial crushing of top-hat and double-hat thin-walled sections , 1999 .

[5]  Wlodek Abramowicz.  The Macro Element Approach in Crash Calculations , 1997 .

[6]  Mark White,et al.  A theoretical analysis for the dynamic axial crushing of top-hat and double-hat thin-walled sections , 1999 .

[7]  Norman Jones,et al.  Dynamic progressive buckling of circular and square tubes , 1986 .

[8]  Mark White,et al.  A theoretical analysis for the quasi-static axial crushing of top-hat and double-hat thin-walled sections , 1999 .

[9]  Norman Jones,et al.  Impact of thin-walled high-strength steel structural sections , 2004 .

[10]  W. Abramowicz,et al.  Dynamic axial crushing of square tubes , 1984 .

[11]  O. Hopperstad,et al.  Static and dynamic axial crushing of square thin-walled aluminium extrusions , 1996 .

[12]  W. Abramowicz,et al.  Transition from initial global bending to progressive buckling of tubes loaded statically and dynamically , 1997 .

[13]  Norman Jones,et al.  Influence of spot-weld failure on crushing of thin-walled structural sections , 2003 .

[14]  N. K. Gupta,et al.  An analysis of axi-symmetric axial collapse of round tubes , 1995 .

[15]  Tomasz Wierzbicki,et al.  CRASH-CAD - A Computer Program for Design of Columns for Optimum Crash , 1990 .

[16]  G. Belingardi,et al.  Investigation on the crushing of circular tubes: theoretical models and experimental validation , 1995 .

[17]  Mark White,et al.  Experimental study into the energy absorbing characteristics of top-hat and double-hat sections subjected to dynamic axial crushing , 1999 .

[18]  W. Abramowicz,et al.  Alexander revisited—A two folding elements model of progressive crushing of tubes , 1992 .