Hybrid Sol–Gel Matrices Doped with Colorimetric/Fluorimetric Imidazole Derivatives

Organic–inorganic hybrids (OIH) are materials that can be easily synthesized by the sol–gel method and combine the advantages of organic and inorganic moieties within a single polymeric matrix. Imidazole derivatives are versatile organic compounds that can change their optical properties with the variation of pH due to the protonation or deprotonation of the nitrogen atoms. This work reports the preparation of different OIHs doped with different contents of two imidazole compounds (3a,b). The obtained materials were characterized structurally by FTIR, and the dielectric properties were studied by electrochemical impedance spectroscopy. The optical properties were studied by UV-Vis absorption and fluorescence spectroscopies. The FTIR analysis showed that the presence of the imidazole does not change the structural properties of the matrices. The normalized resistance values obtained for the doped matrices ranged between 8.57 and 9.32 Ω cm2, all being higher than the undoped matrix. The σ ranged between 9.49 and 10.28 S cm−1, being all higher than the pure OIH samples. Compound 3a showed a maximum absorption peak at 390 nm, which is present in the OIH spectra, proving the presence of the compound. In the case of compound 3b, a maximum absorption wavelength at 412 nm was found, and the compound peak was not clear, which may indicate that an interaction between the compound and the matrix occurred. A synergetic effect between the intrinsic emission of the matrix and the fluorescence of 3a is found on the OIH-doped matrices.

[1]  F. Rodembusch,et al.  Imidazoles and Oxazoles from Lapachones and Phenanthrene‐9,10‐dione: A Journey through their Synthesis, Biological Studies, and Optical Applications , 2021, Chemical record.

[2]  O. Wolfbeis,et al.  Optical Sensing and Imaging of pH Values: Spectroscopies, Materials, and Applications , 2020, Chemical reviews.

[3]  R. B. Figueira,et al.  Synthesis, Optical and Electrical Characterization of Amino-alcohol Based Sol-gel Hybrid Materials , 2020, Polymers.

[4]  U. Singh,et al.  Inorganic and organic anion sensing by azole family members , 2020 .

[5]  A. Gomes,et al.  An insight into the synthesis of cationic porphyrin-imidazole derivatives and their photodynamic inactivation efficiency against Escherichia coli , 2020 .

[6]  Sajjad Mohebbi,et al.  High efficient photocatalytic reduction of aqueous Zn2+, Pb2+ and Cu2+ ions using modified titanium dioxide nanoparticles with amino acids , 2020 .

[7]  V. Bagnato,et al.  Antibacterial photodynamic inactivation of antibiotic-resistant bacteria and biofilms with nanomolar photosensitizer concentrations. , 2020, ACS infectious diseases.

[8]  S. Fujiwara,et al.  Synthesis and Characterization of Hybrid Polymer Based on Functionalized Silica as Efficient Adsorbent for Heavy Metal Ions from Aqueous Solution , 2020 .

[9]  H. Al‐Lohedan,et al.  New Smart Magnetic Ionic Liquid Nanocomposites Based on Chemically Bonded Imidazole Silica for Water Treatment , 2019, ACS omega.

[10]  O. Godard,et al.  Switching from brittle to ductile isotactic polypropylene-g-maleic anhydride by crosslinking with capped-end polyether diamine , 2019, Polymer.

[11]  Yuan Yuan,et al.  Novel imidazole‐grafted hybrid anion exchange membranes based on poly(2,6‐dimethyl‐1,4‐phenylene oxide) for fuel cell applications , 2018 .

[12]  A. Doroshenko,et al.  Heterogeneous polarity and surface acidity of silica-organic materials with fixed 1-n-propyl-3-methylimidazolium chloride as probed by solvatochromic and fluorescent dyes , 2018 .

[13]  I. Mangalagiu,et al.  Hybrid imidazole-pyridine derivatives: an approach to novel anticancer DNA intercalators. , 2018, Current medicinal chemistry.

[14]  B. G. Soares,et al.  Ionic liquid-based organically modified silica for the development of new electrorheological fluids , 2017 .

[15]  Shanjun Gao,et al.  Phosphonic acid functionalized siloxane crosslinked with 3‐glycidoxyproyltrimethoxysilane grafted polybenzimidazole high temperature proton exchange membranes , 2017 .

[16]  R. B. Figueira,et al.  Hybrid Coatings Enriched with Tetraethoxysilane for Corrosion Mitigation of Hot-Dip Galvanized Steel in Chloride Contaminated Simulated Concrete Pore Solutions , 2017, Materials.

[17]  D. Dragunski,et al.  Synthesis and application of a bifunctional hybrid organic-inorganic adsorbent based on polyvinylimidazole-SiO2/APTMS for the extraction of arsenate in aqueous medium , 2017 .

[18]  U. Yıldız,et al.  Synthesis, characterization and swelling investigations of novel polyetheramine-based hydrogels , 2017 .

[19]  C. Bianchi,et al.  Sol-gel hybrid coatings containing silica and a perfluoropolyether derivative with high resistance and anti-fouling properties in liquid media , 2016 .

[20]  Jiangna Guo,et al.  CO2 Responsive Imidazolium-Type Poly(Ionic Liquid) Gels. , 2016, Macromolecular rapid communications.

[21]  L. Verdolotti,et al.  Peculiarities in the structure – Properties relationship of epoxy-silica hybrids with highly organic siloxane domains , 2015 .

[22]  R. B. Figueira,et al.  Alcohol-Aminosilicate Hybrid Coatings for Corrosion Protection of Galvanized Steel in Mortar , 2014 .

[23]  M. M. Salta,et al.  Ureasilicate hybrid coatings for corrosion protection of galvanized steel in cementitious media , 2013 .

[24]  U. Thanganathan Effects of imidazole on the thermal and conductivity properties of hybrid membrane based on poly(vinyl alcohol)/SiO2 , 2012 .

[25]  Manuel F. M. Costa,et al.  Development of new high transparent hybrid organic–inorganic monoliths with surface engraved diffraction pattern , 2012 .

[26]  P. Molina,et al.  Imidazole derivatives: a comprehensive survey of their recognition properties. , 2012, Organic & biomolecular chemistry.

[27]  J. Kulhanek,et al.  Imidazole as a parent π-conjugated backbone in charge-transfer chromophores , 2012, Beilstein journal of organic chemistry.

[28]  M. C. Alonso,et al.  Hydrogen embrittlement risk of high strength galvanized steel in contact with alkaline media , 2011 .

[29]  Vincent Vivier,et al.  Determination of effective capacitance and film thickness from constant-phase-element parameters , 2010 .

[30]  P. Lianos,et al.  Use of Ureasil gels to extract ions from aqueous solutions. , 2007, Journal of hazardous materials.

[31]  J. Coates Interpretation of Infrared Spectra, A Practical Approach , 2006 .

[32]  M. C. Alonso,et al.  Electrochemical and analytical assessment of galvanized steel reinforcement pre-treated with Ce and La salts under alkaline media , 2006 .

[33]  M. Gu,et al.  Mechanism and Kinetics of Epoxy-Imidazole Cure Studied with Two Kinetic Methods , 2005 .

[34]  A. Gandini,et al.  New polyfunctional dendritic linear hybrids from terminal amine polyether oligomers (Jeffamine®): synthesis and characterization , 2005 .

[35]  L. Matějka,et al.  Preparation and characterization of hybrid organic–inorganic epoxide-based films and coatings prepared by the sol–gel process , 2004 .

[36]  J. Brus,et al.  Self-Organization, Structure, Dynamic Properties, and Surface Morphology of Silica/Epoxy Films As Seen by Solid-State NMR, SAXS, and AFM , 2004 .

[37]  L. Hench,et al.  The sol-gel process , 1990 .

[38]  H. Schmidt New type of non-crystalline solids between inorganic and organic materials , 1985 .

[39]  J. Morris,et al.  Fluorescence quantum yield determinations. 9,10-Diphenylanthracene as a reference standard in different solvents , 1976 .

[40]  S. Kistler,et al.  Coherent Expanded Aerogels and Jellies. , 1931, Nature.