A generalization of the Theory of Constraints: Choosing the optimal improvement option with consideration of variability and costs

Abstract The Theory of Constraints (TOC) was proposed in the mid-1980s and has significantly impacted productivity improvement in manufacturing systems. Although it is intuitive and easy to understand, its conclusions are mainly derived from deterministic settings or based on mean values. This article generalizes the concept of TOC to stochastic settings through the performance analysis of queueing systems and simulation studies. We show that, in stochastic settings, the conventional TOC may not be optimal, and a throughput bottleneck should be considered in certain types of machines at the planning stage. Incorporating the system variability and improvement costs, the Generalized Process Of OnGoing Improvement (GPOOGI) is developed in this study. It shows that improving a frontend machine in a production line can be more effective than improving the throughput bottleneck. The findings indicate that we should consider the dependence among stations and the cost of improvement options during productivity improvement and should not simply improve the system bottleneck according to the conventional TOC. According to the GPOOGI, the managers of production systems would be able to make optimal decision during the continuous improvement process.

[1]  Lin Li,et al.  Data driven bottleneck detection of manufacturing systems , 2009 .

[2]  Moacir Godinho Filho,et al.  Comparing the effect of different strategies of continuous improvement programmes on repair time to reduce lead time , 2016 .

[3]  Ning Zhao,et al.  Variability and the fundamental properties of production lines , 2016, Comput. Ind. Eng..

[4]  Andy Neely,et al.  A simulation study of bottleneck scheduling , 1992 .

[5]  Jacobus E. Rooda,et al.  Characterization of operational time variability using effective process times , 2003 .

[6]  Gerhard Plenert,et al.  MRP,JIT, and OPT: What's b:20Best”? , 1986 .

[7]  Rajan Suri,et al.  Quick Response Manufacturing , 1998 .

[8]  Moacir Godinho Filho,et al.  Comparing different strategies for the allocation of improvement programmes in a flow shop environment , 2015 .

[9]  Kan Wu,et al.  Analysis of tandem queues with finite buffer capacity , 2017 .

[10]  A. van de Merwe.  It's not luck , 2002 .

[11]  R. Shapiro,et al.  From supply chain to demand chain: the role of lead time reduction in improving demand chain performance , 2004 .

[12]  Lars Mönch,et al.  A distributed shifting bottleneck heuristic for complex job shops , 2005, Comput. Ind. Eng..

[13]  Henry D. Friedman,et al.  Reduction Methods for Tandem Queuing Systems , 1965 .

[14]  Eric Noreen,et al.  Theory of Constraints and Its Implications for Management Accounting: A Report on the Actual Implementation of The Theory of Constraints , 1995 .

[15]  J. Forrester.  Industrial Dynamics , 1997 .

[16]  Moacir Godinho Filho,et al.  A framework for choosing among different lean-based improvement programs , 2015 .

[17]  Computer Staff,et al.  The Machine That Changed the World , 1992 .

[18]  Matt Barney,et al.  Motorola's Second Generation , 2002 .

[19]  K. T. Marshall,et al.  Some Inequalities in Queuing , 1968, Oper. Res..

[20]  Kan Wu,et al.  Dependence among single stations in series and its applications in productivity improvement , 2015, Eur. J. Oper. Res..

[21]  Kan Wu,et al.  Classification of queueing models for a workstation with interruptions: a review , 2014 .

[22]  Kan Wu,et al.  Taxonomy of batch queueing models in manufacturing systems , 2014, Eur. J. Oper. Res..

[23]  W. Hopp,et al.  Using an optimized queueing network model to support wafer fab design , 2002 .

[24]  C. R. Glassey,et al.  Bottleneck starvation indicators for shop floor control (semiconductor manufacturing process) , 1988 .

[25]  Leon F. McGinnis,et al.  Interpolation approximations for queues in series , 2013 .

[26]  Kan Wu.  An Examination of Variability and Its Basic Properties for a Factory , 2018 .

[27]  S. MacEachern.  The race is on. , 1983, Modern healthcare.

[28]  Mike Wright,et al.  Capacity and lead-time management when demand for service is seasonal and lead-time sensitive , 2015, Eur. J. Oper. Res..

[29]  T. Ohno.  How the Toyota Production System was Created , 1982 .

[30]  Reha Uzsoy,et al.  The effect of shop floor continuous improvement programs on the lot size–cycle time relationship in a multi-product single-machine environment , 2011 .

[31]  Reha Uzsoy,et al.  Assessing the impact of alternative continuous improvement programmes in a flow shop using system dynamics , 2014 .

[32]  Kan Wu,et al.  An examination of variability and its basic properties for a factory , 2005, IEEE Transactions on Semiconductor Manufacturing.

[33]  D. Iglehart,et al.  Multiple channel queues in heavy traffic. II: sequences, networks, and batches , 1970, Advances in Applied Probability.

[34]  J. Kingman.  Some inequalities for the queue GI/G/1 , 1962 .

[35]  Peter S. Pande,et al.  The Six Sigma Way: How GE, Motorola, and Other Top Companies are Honing Their Performance , 2000 .

[36]  J. Si,et al.  The development of the complete X-factor contribution measurement for improving cycle time and cycle time variability , 2006, IEEE Transactions on Semiconductor Manufacturing.

[37]  P. Schroeder.  The Goal: A Process of Ongoing Improvement , 1994 .

[38]  Leon F. McGinnis,et al.  Performance evaluation for general queueing networks in manufacturing systems: Characterizing the trade-off between queue time and utilization , 2012, Eur. J. Oper. Res..

[39]  Jong-Tae Lim,et al.  Bottlenecks in serial production lines: A system-theoretic approach , 1996 .

[40]  S. Rahman,et al.  Theory of constraints , 1998 .

[41]  Kelvin F. Cross,et al.  Workflow analysis, just-in-time techniques simplify adminstrative process in paper work operation , 1988 .