Abstract In the porous electrodes typically used for electrochemical capacitors, the self-discharge profile may be affected by charge redistribution in the pores of the electrode and the kinetics of the Faradaic self-discharge. In this paper, the activation-controlled self-discharge of a porous electrode is modelled using a de Levie transmission line hardware circuit to model a pore and an activation-controlled discharge is applied at the mouth of this “pore”. The self-discharge profile exhibits three main regions. The first region is governed purely by the activation-controlled discharge as the charge redistribution has not yet begun. The second region combines both charge redistribution and the activation-controlled discharge, resulting in a shallower slope than expected for a purely activation-controlled discharge. Finally, charge redistribution ends and the profile reverts to the activation-controlled profile. These three regions are mirrored in experimental self-discharge profiles and show that the duration charge redistribution can be determined from the shape of the self-discharge profile.
[1]
Jianjun Niu,et al.
Comparative studies of self-discharge by potential decay and float-current measurements at C double-layer capacitor and battery electrodes
,
2004
.
[2]
B. Conway,et al.
Diagnostic analyses for mechanisms of self-discharge of electrochemical capacitors and batteries
,
1997
.
[3]
Jennifer Black,et al.
Effects of charge redistribution on self-discharge of electrochemical capacitors
,
2009
.
[4]
R. D. Levie,et al.
On porous electrodes in electrolyte solutions: I. Capacitance effects☆
,
1963
.
[5]
W. A. Adams,et al.
Electrochemical efficiency in multiple discharge/recharge cycling of supercapacitors in hybrid EV applications
,
1999
.