Achieving band convergence by tuning the bonding ionicity in n‐type Mg3Sb2

Identifying strategies for beneficial band engineering is crucial for the optimization of thermoelectric (TE) materials. In this study, we demonstrate the beneficial effects of ionic dopants on n‐type Mg3Sb2. Using the band‐resolved projected crystal orbital Hamilton population, the covalent characters of the bonding between Mg atoms at different sites are observed. By partially substituting the Mg at the octahedral sites with more ionic dopants, such as Ca and Yb, the conduction band minimum (CBM) of Mg3Sb2 is altered to be more anisotropic with an enhanced band degeneracy of 7. The CBM density of states of doped Mg3Sb2 with these dopants is significantly enlarged by band engineering. The improved Seebeck coefficients and power factors, together with the reduced lattice thermal conductivities, imply that the partial introduction of more ionic dopants in Mg3Sb2 is a general solution for its n‐type TE performance. © 2019 Wiley Periodicals, Inc.

[1]  G. J. Snyder,et al.  Observation of valence band crossing: the thermoelectric properties of CaZn2Sb2–CaMg2Sb2 solid solution , 2018 .

[2]  Eric S. Toberer,et al.  Zintl Chemistry for Designing High Efficiency Thermoelectric Materials , 2010 .

[3]  Jorge O. Sofo,et al.  Transport coefficients from first-principles calculations , 2003 .

[4]  Tiejun Zhu,et al.  Compromise and Synergy in High‐Efficiency Thermoelectric Materials , 2017, Advanced materials.

[5]  M. Mori,et al.  Valence band photoemission study of the copper chalcogenide compounds, Cu2S, Cu2Se and Cu2Te , 2003 .

[6]  Zhifeng Ren,et al.  Thermoelectric properties of Na-doped Zintl compound: Mg 3− x Na x Sb 2 , 2015 .

[7]  Richard Dronskowski,et al.  Crystal orbital Hamilton populations (COHP): energy-resolved visualization of chemical bonding in solids based on density-functional calculations , 1993 .

[8]  P. Blaha,et al.  Accurate band gaps of semiconductors and insulators with a semilocal exchange-correlation potential. , 2009, Physical review letters.

[9]  Jihui Yang,et al.  Electrical Transport Properties of Filled CoSb3 Skutterudites: A Theoretical Study , 2009 .

[10]  G. J. Snyder,et al.  Thermoelectric properties and microstructure of Mg3Sb2 , 2006 .

[11]  Jun Mao,et al.  Defect Engineering for Realizing High Thermoelectric Performance in n-Type Mg3Sb2-Based Materials , 2017 .

[12]  Jun Mao,et al.  Significantly enhanced thermoelectric properties of p-type Mg3Sb2 via co-doping of Na and Zn , 2018 .

[13]  G. Scuseria,et al.  Hybrid functionals based on a screened Coulomb potential , 2003 .

[14]  Jun Mao,et al.  Manipulation of ionized impurity scattering for achieving high thermoelectric performance in n-type Mg3Sb2-based materials , 2017, Proceedings of the National Academy of Sciences.

[15]  Wei Liu,et al.  Convergence of conduction bands as a means of enhancing thermoelectric performance of n-type Mg2Si(1-x)Sn(x) solid solutions. , 2012, Physical review letters.

[16]  Herbert Schäfer,et al.  Zintl Phases: Transitions between Metallic and Ionic Bonding , 1973 .

[17]  Shuqi Zheng,et al.  Computational prediction of a high ZT of n-type Mg3Sb2-based compounds with isotropic thermoelectric conduction performance. , 2018, Physical chemistry chemical physics : PCCP.

[18]  Stepan S. Tsirkin,et al.  Unfolding spinor wave functions and expectation values of general operators: Introducing the unfolding-density operator , 2014, 1409.5343.

[19]  Adrienn Ruzsinszky,et al.  Strongly Constrained and Appropriately Normed Semilocal Density Functional. , 2015, Physical review letters.

[20]  Jun Mao,et al.  Tuning the carrier scattering mechanism to effectively improve the thermoelectric properties , 2017 .

[21]  Heng Wang,et al.  Convergence of electronic bands for high performance bulk thermoelectrics , 2011, Nature.

[22]  T. Kanno,et al.  Isotropic Conduction Network and Defect Chemistry in Mg3+δSb2‐Based Layered Zintl Compounds with High Thermoelectric Performance , 2016, Advanced materials.

[23]  Shuqi Zheng,et al.  Designing high-performance n-type Mg3Sb2-based thermoelectric materials through forming solid solutions and biaxial strain , 2018 .

[24]  Donald T. Morelli,et al.  On the Thermoelectric Properties of Zintl Compounds Mg3Bi2−xPnx (Pn = P and Sb) , 2013, Journal of Electronic Materials.

[25]  Blöchl,et al.  Projector augmented-wave method. , 1994, Physical review. B, Condensed matter.

[26]  Yang-Ki Hong,et al.  Thermoelectric properties of Mn-doped Mg–Sb single crystals , 2014 .

[27]  Burke,et al.  Generalized Gradient Approximation Made Simple. , 1996, Physical review letters.

[28]  Eric S. Toberer,et al.  Phase Boundary Mapping to Obtain n-type Mg3Sb2-Based Thermoelectrics , 2017 .

[29]  Gang Chen,et al.  Recent advances in thermoelectric nanocomposites , 2012 .

[30]  J. Bardeen,et al.  Deformation Potentials and Mobilities in Non-Polar Crystals , 1950 .

[31]  David J. Singh,et al.  On the tuning of electrical and thermal transport in thermoelectrics: an integrated theory–experiment perspective , 2016 .

[32]  Richard Dronskowski,et al.  Analytic projection from plane‐wave and PAW wavefunctions and application to chemical‐bonding analysis in solids , 2013, J. Comput. Chem..

[33]  Kresse,et al.  Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. , 1996, Physical review. B, Condensed matter.

[34]  Hubert Scherrer,et al.  Transport in doped skutterudites: Ab initio electronic structure calculations , 2005 .

[35]  David J. Singh,et al.  Thermoelectric properties of AMg2X2, AZn2Sb2 (A = Ca, Sr, Ba; X = Sb, Bi), and Ba2ZnX2 (X = Sb, Bi) Zintl compounds , 2017 .

[36]  Jihui Yang,et al.  The “electron crystal” behavior in copper chalcogenides Cu2X (X = Se, S) , 2017 .

[37]  G. J. Snyder,et al.  Zintl phases for thermoelectric devices. , 2007, Dalton transactions.

[38]  K. Zhang,et al.  Thermoelectric properties of nanocrystalline (Mg1−xZnx)3Sb2 isostructural solid solutions fabricated by mechanical alloying , 2009 .

[39]  Richard Dronskowski,et al.  Discovery of High-Performance Thermoelectric Chalcogenides through Reliable High-Throughput Material Screening. , 2018, Journal of the American Chemical Society.

[40]  Martín Martínez-Ripoll,et al.  The crystal structure of a-Mg3Sb2 , 1974 .

[41]  B. Iversen,et al.  Discovery of high-performance low-cost n-type Mg3Sb2-based thermoelectric materials with multi-valley conduction bands , 2017, Nature Communications.

[42]  David J. Singh,et al.  Chemical bonding, conductive network, and thermoelectric performance of the ternary semiconductors Cu2SnX3(X=Se,S) from first principles , 2012 .

[43]  David J. Singh,et al.  Benefits of Carrier Pocket Anisotropy to Thermoelectric Performance: The case of $p$-type AgBiSe$_2$ , 2015, 1505.03379.

[44]  Georg Kresse,et al.  Erratum: “Screened hybrid density functionals applied to solids” [J. Chem. Phys. 124, 154709 (2006)] , 2006 .

[45]  S. I. Simak,et al.  Lattice dynamics of anharmonic solids from first principles , 2011, 1103.5590.

[46]  David J. Singh.  Chapter 5 Theoretical and computational approaches for identifying and optimizing novel thermoelectric materials , 2001 .

[47]  Igor A. Abrikosov,et al.  Temperature-dependent effective third-order interatomic force constants from first principles , 2013, 1308.5436.

[48]  Jihui Yang,et al.  Dynamic process of the resonant phonon scattering in fully filled skutterudites , 2018, Physical Review B.

[49]  Anton Kokalj,et al.  Computer graphics and graphical user interfaces as tools in simulations of matter at the atomic scale , 2003 .

[50]  T. Kolodiazhnyi,et al.  Structural and physical properties of Mg3−xZnxSb2 (x=0–1.34) , 2007 .

[51]  Mildred S. Dresselhaus,et al.  Effect of quantum-well structures on the thermoelectric figure of merit. , 1993, Physical review. B, Condensed matter.

[52]  Jonas Björk,et al.  Effects of extrinsic and intrinsic perturbations on the electronic structure of graphene : Retaining an effective primitive cell band structure by band unfolding , 2014 .

[53]  Volker L. Deringer,et al.  Crystal orbital Hamilton population (COHP) analysis as projected from plane-wave basis sets. , 2011, The journal of physical chemistry. A.

[54]  Gustavo E. Scuseria,et al.  Erratum: “Hybrid functionals based on a screened Coulomb potential” [J. Chem. Phys. 118, 8207 (2003)] , 2006 .

[55]  Bo B. Iversen,et al.  Simultaneous improvement of power factor and thermal conductivity via Ag doping in p-type Mg3Sb2 thermoelectric materials , 2017 .

[56]  Richard Dronskowski,et al.  LOBSTER: A tool to extract chemical bonding from plane‐wave based DFT , 2016, J. Comput. Chem..