Using the high light absorption properties of amorphous silicon, we developed a new device configuration that can detect photons and store the induced charges for relatively long time. This device, coupled to a scintillator such as CsI(Tl) in an array form, could be used as a scintillation camera, or for long-term photo-detection such as radionuclide labeled chromatography. The detector has a simple sandwich structure consisting of a scintillator followed by a top metal layer, p-i-n layers of hydrogenated amorphous silicon (a-Si:H), a second metal layer, a thin insulating layer and a bottom metal layer. The electron-hole pairs generated in the i-layer by the interaction with the incident light will be separated by the imposed electric field and be stored in the central metal-insulator interface. Readout will be done by switching the external bias to ground after the storage time, which depends on the needs for the specific application. Prototype devices were fabricated and tested. The performances of the devices were analyzed in connection with the storage time and the background signal produced by the thermally generated charges.
[1]
V. Perez-Mendez,et al.
Amorphous silicon position sensitive neutron detector
,
1991,
Conference Record of the 1991 IEEE Nuclear Science Symposium and Medical Imaging Conference.
[2]
Robert A. Street,et al.
Long-time transient conduction in a-Si:H p─i─n devices
,
1991
.
[3]
Victor Perez-Mendez,et al.
X-ray and charged particle detection with CsI(Tl) layer coupled to a Si:H photodiode layers
,
1991
.
[4]
E. Rosencher,et al.
Transient-current study of field-assisted emission from shallow levels in silicon
,
1984
.
[5]
G. Vincent,et al.
Electric field effect on the thermal emission of traps in semiconductor junctions
,
1979
.
[6]
Robert M. Hill,et al.
Poole-Frenkel conduction in amorphous solids
,
1971
.