Angle Displacement Robust Controller for the Port Plate of the Hydraulic Transformer

The hydraulic transformer is used in the hydraulic system to enhance the efficiency. However, how to control the angle displacement of the port plate is becoming a critical issue because of the new structure of the hydraulic transformer. This paper presents a new method for the angle displacement control system. Firstly, the basic principle of the system is presented. Then, the disturbance which is mainly the friction torque between the port plate and the cylinder block is calculated to estimate the range. Furthermore, the guaranteed cost control (GCC) is analyzed and combined with the disturbance and the characteristics of parameter uncertainties. Finally, the proposed control method is compared with the traditional PI control and the simulation result shows the effectiveness of the proposed design method.

[1]  Qingfeng Wang,et al.  Development of hybrid powered hydraulic construction machinery , 2010 .

[2]  Honghai Liu,et al.  Reliable Fuzzy Control for Active Suspension Systems With Actuator Delay and Fault , 2012, IEEE Transactions on Fuzzy Systems.

[3]  Shengyuan Xu,et al.  Guaranteed Cost Control , 2006 .

[4]  Chul Soo Kim,et al.  Robust Speed Control of a Variable-Displacement Hydraulic Motor Considering Saturation Nonlinearity , 2000 .

[5]  MA Xin-wen.  Robust H_∞ Control for a Class of Nonlinear Time Delay Systems , 2008 .

[6]  Qingling Zhang,et al.  Robust normalization and guaranteed cost control for a class of uncertain descriptor systems , 2012, Autom..

[7]  K. Poolla,et al.  Robust regulation in the presence of norm-bounded uncertainty , 1995, IEEE Trans. Autom. Control..

[8]  Hiroaki Mukaidani,et al.  An LMI approach to guaranteed cost control for uncertain delay systems , 2003 .

[9]  Hui Zhang,et al.  Robust Filtering for Ammonia Coverage Estimation in Diesel Engine Selective Catalytic Reduction Systems , 2013 .

[10]  Kyoung Kwan Ahn,et al.  A STUDY ON ENERGY SAVING POTENTIAL OF HYDRAULIC CONTROL SYSTEM USING SWITCHING TYPE CLOSED LOOP CONSTANT PRESSURE SYSTEM , 2008 .

[11]  Ahn Kyoung Kwan,et al.  A study on an energy saving electro-hydraulic excavator , 2009, 2009 ICCAS-SICE.

[12]  Hamid Reza Karimi,et al.  Energy-Saving Analysis of Hydraulic Hybrid Excavator Based on Common Pressure Rail , 2013, TheScientificWorldJournal.

[13]  Jihai Jiang,et al.  Analysis and development of the hydraulic secondary regulation system based on the CPR , 2011, Proceedings of 2011 International Conference on Fluid Power and Mechatronics.

[14]  Daniel W. C. Ho,et al.  Robust H∞ control for a class of nonlinear discrete time-delay stochastic systems with missing measurements , 2009, Autom..

[15]  Hamid Reza Karimi,et al.  Observer-Based Robust Control for Hydraulic Velocity Control System , 2013 .

[16]  K. Ohnishi,et al.  Robust force sensorless control in motion control system , 2006, 9th IEEE International Workshop on Advanced Motion Control, 2006..

[17]  Honghai Liu,et al.  Adaptive Sliding-Mode Control for Nonlinear Active Suspension Vehicle Systems Using T–S Fuzzy Approach , 2013, IEEE Transactions on Industrial Electronics.

[18]  Shen Wei.  The review of full hydraulic hybrid excavator based on common pressure rail network , 2010 .

[19]  Wei Xing Zheng,et al.  Robust H∞ control of delayed singular systems with linear fractional parametric uncertainties , 2009, J. Frankl. Inst..

[20]  Kyongsu Yi,et al.  Development of supervisory control strategy for optimized fuel consumption of the compound hybrid excavator , 2012 .

[21]  Hubertus Murrenhoff,et al.  Energy efficiency of mobile working machines , 2010 .

[22]  Gem Vael,et al.  Low-emission hydraulic hybrid for passenger cars , 2009 .

[23]  Hubertus Murrenhoff,et al.  Emissionsarmer Hydraulik-Hybridantrieb für Personenwagen , 2009 .

[24]  Hui Zhang,et al.  Robust Static Output Feedback Control and Remote PID Design for Networked Motor Systems , 2011, IEEE Transactions on Industrial Electronics.

[25]  Zhang Yanting,et al.  Control strategies of power system in hybrid hydraulic excavator , 2008 .

[26]  Ian R. Petersen,et al.  Optimal guaranteed cost control of uncertain systems via static and dynamic output feedback , 1996, Autom..

[27]  Long Quan,et al.  Excavator energy-saving efficiency based on diesel engine cylinder deactivation technology , 2012 .

[28]  Zhao Fu,et al.  The Innas Hydraulic Transformer The Key to the Hydrostatic Common Pressure Rail , 2000 .

[29]  J.-O. Palmberg,et al.  What a difference a hole makes : The commercial value of the innas hydraulic transformer , 1999 .

[30]  P.A.J. Achten,et al.  Transforming future hydraulics : a new design of a hydraulic transformer , 1997 .

[31]  Kemin Zhou,et al.  Mixed /spl Hscr//sub 2/ and /spl Hscr//sub /spl infin// performance objectives. II. Optimal control , 1994 .