Controlling the coefficient of thermal expansion of cementitious materials – A new application for superabsorbent polymers

Abstract Self-desiccation occurring in low w/c cement paste leads not only to autogenous shrinkage, but also causes an increase of the coefficient of thermal expansion (CTE) at early ages. This increase can reach about 70% or even more in the first days of hydration. The latter effect is due to the internal relative humidity (RH) changes induced by temperature changes, which cause additional deformation acting in the same direction as the pure thermal dilation in a partially saturated cementitious material. Internal curing by means of superabsorbent polymers (SAP) has recently been proven effective for promoting hydration of cement and for limiting self-desiccation and autogenous shrinkage. This study shows that SAP are also able to control or even completely eliminate another negative effect of self-desiccation, the increase of the CTE. This is to the authors’ knowledge the first such application of SAP. In this work, both aspects of SAP use are investigated, with special focus on limiting the thermal expansion coefficient. First, self-desiccation and self-desiccation shrinkage and their reduction with SAP are investigated in cement pastes and mortars using water-activity measurements and linear shrinkage measurements with corrugated tubes. Next, the thermal expansion is studied experimentally using both volumetric and linear methods for a series of cement pastes and mortars of different w/c. Addition of SAP in cement pastes and mortars is proven to practically eliminate the increase of the CTE during the first days of hardening, limiting the CTE to only 60–70% of the value developed for materials without SAP addition. The reduction of the CTE is possible thanks to maintaining high internal RH levels and consequently reducing the temperature effect on RH.

[1]  George W. Scherer,et al.  Characterization of saturated porous bodies , 2004 .

[2]  Zvi Hashin,et al.  Effective thermal expansion coefficients and specific heats of composite materials , 1970 .

[3]  F. Stallmach,et al.  Water balance and pore structure development in cementitious materials in internal curing with modified superabsorbent polymer studied by NMR , 2009 .

[4]  P. Lura,et al.  Measuring techniques for autogenous strain of cement paste , 2007 .

[5]  G. Scherer Measuring Permeability of Rigid Materials by a Beam‐Bending Method: I, Theory , 2004 .

[6]  Ø. Bjøntegaard,et al.  Coefficient of thermal expansion of cement paste and concrete: Mechanisms of moisture interaction , 2006 .

[7]  K. Breugel,et al.  Autogenous shrinkage in high-performance cement paste: An evaluation of basic mechanisms , 2003 .

[8]  Karen L. Scrivener,et al.  The origin of early age expansions induced in cementitious materials containing shrinkage reducing admixtures , 2011 .

[9]  P. Bowen,et al.  Changes in portlandite morphology with solvent composition: Atomistic simulations and experiment , 2011 .

[10]  Roman Loser,et al.  A volumetric technique for measuring the coefficient of thermal expansion of hardening cement paste and mortar , 2010 .

[11]  F. Stallmach,et al.  NMR diffusion and relaxation studies during cement hydration—A non-destructive approach for clarification of the mechanism of internal post curing of cementitious materials , 2006 .

[12]  P. Lura,et al.  Superabsorbent Polymers — An Additive to Increase the Freeze-Thaw Resistance of High Strength Concrete , 2007 .

[13]  O. Jensen,et al.  Water-entrained cement-based materials: II. Experimental observations , 2002 .

[14]  James J. Beaudoin The 12th International Congress on the Chemistry of Cement , 2008 .

[15]  Per Freiesleben Hansen,et al.  Water-entrained cement-based materials , 2001 .

[16]  D. Gawin,et al.  Modeling of Water Migration during Internal Curing with Superabsorbent Polymers , 2012 .

[17]  Øyvind Bjøntegaard,et al.  On the measurement of free deformation of early age cement paste and concrete , 2004 .

[18]  D. Bentz,et al.  Standard Test Method for Autogenous Strain of Cement Paste and Mortar , 2007 .

[19]  K. K. Hansen,et al.  Isosteric Vapor Pressure – Temperature Data for Water Sorption in Hardened Cement Paste: Enthalpy, Entropy and Sorption Isotherms at Different Temperatures , 2003 .

[20]  P. Freiesleben Hansen,et al.  A dilatometer for measuring autogenous deformation in hardening portland cement paste , 1995 .

[21]  F. Cohen Tenoudji,et al.  Mechanical properties of cement pastes and mortars at early ages: Evolution with time and degree of hydration , 1996 .

[22]  D. Gawin,et al.  Modeling of internal curing in maturing mortar , 2011 .

[23]  Konstantin Kovler,et al.  Overview and Future Trends of Shrinkage Research , 2006 .

[24]  Zdeněk P. Bažant,et al.  Delayed thermal dilatations of cement paste and concrete due to mass transport , 1970 .

[25]  S. Shtrikman,et al.  A variational approach to the theory of the elastic behaviour of multiphase materials , 1963 .

[26]  Pietro Lura,et al.  Techniques and materials for internal water curing of concrete , 2006 .

[27]  Pietro Lura,et al.  Moisture dependence of thermal expansion in cement-based materials at early ages , 2013 .

[28]  S. Poyet,et al.  Temperature dependence of the sorption isotherms of cement-based materials: Heat of sorption and Clausius–Clapeyron formula , 2009 .

[29]  Pietro Lura,et al.  Experimental observation of internal water curing of concrete , 2007 .

[30]  D. W. Hobbs,et al.  The dependence of the bulk modulus, Young's modulus, creep, shrinkage and thermal expansion of concrete upon aggregate volume concentration , 1971 .

[31]  David A Lange,et al.  Thermal dilation and internal relative humidity of hardened cement paste , 2005 .

[32]  J. Weiss,et al.  Cracking in cement paste induced by autogenous shrinkage , 2009 .

[33]  A. Caballero,et al.  A numerical and experimental study of aggregate-induced shrinkage cracking in cementitious composites , 2012 .

[34]  Daniel Cusson,et al.  Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking , 2008 .

[35]  H. Taylor Modification of the Bogue calculation , 1989 .