Three-dimensional discrete element modelling of tillage: Determination of a suitable contact model and parameters for a cohesionless soil

Accurate modelling of soil–implement interaction is vital to optimise the design of tillage implements. Discrete element modelling (DEM) is a numerical method used for modelling the mechanical behaviour of granular materials. When DEM is used for tillage the soil is assumed to consist of distinct particles with the interactions between the particles controlled by contact models that are governed by physical laws. In previous three-dimensional (3D) DEM tillage studies the soil particles were assumed as having elastic contacts and the plastic deformation behaviour of the soil particles was not taken into account. Using EDEM software, a non-linear elastic contact model was compared with a linear hysteretic spring contact model that considers the plasticity of the soil. The DEM parameters required to run the simulations were determined from angle of repose and penetration tests, matching the simulation results to test results using a modelled spherical particle with radii of 10 mm. The simulation results of both the non-linear elastic and linear hysteretic spring (plastic) contact models were compared with experimental results from a sweep tillage tool. An improved correlation was obtained between the measured draft and vertical force results using the linear hysteretic spring (plastic) contact model. Further simulations using the linear hysteretic spring (plastic) model showed there was a quadratically increasing trend with particle size from 4 to 10 mm for the parameters of coefficient of restitution of soil–soil, friction of soil–soil and integration time step.

[1]  I. Shmulevich,et al.  Interaction between soil and a wide cutting blade using the discrete element method , 2007 .

[2]  R. L. Kushwaha,et al.  Three-dimensional, finite element interaction between soil and simple tillage tool , 1991 .

[3]  Tavs Nyord,et al.  A discrete element model for soil–sweep interaction in three different soils , 2013 .

[4]  R. L. Braun,et al.  Stress calculations for assemblies of inelastic speres in uniform shear , 1986 .

[5]  A. O. Raji,et al.  Discrete element modelling of the deformation of bulk agricultural particulates , 1999 .

[6]  K. Konstankiewicz,et al.  A new optical method for soil stress and strain investigation , 2002 .

[7]  J. Keith Nisbett,et al.  Shigley's Mechanical Engineering Design , 1983 .

[8]  Peter Eberhard,et al.  Prediction of draft forces in cohesionless soil with the Discrete Element Method , 2011 .

[9]  R. L. Kushwaha,et al.  Numerical modelling of soil stress and pressure distribution on a flat tillage tool using computational fluid dynamics , 2007 .

[10]  R. L. Kushwaha,et al.  Experimental validation of computational fluid dynamics modeling for narrow tillage tool draft , 2009 .

[11]  A. R. Reece,et al.  Symmetrical three-dimensional soil failure , 1967 .

[12]  Edward McKyes,et al.  Soil Cutting and Tillage , 1986 .

[13]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[14]  John V. Perumpral,et al.  A model for predicting soil-tool interaction , 1988 .

[15]  J. Mak,et al.  Determining parameters of a discrete element model for soil–tool interaction , 2012 .

[16]  R. L. Kushwaha,et al.  SIMULATION OF SOIL DEFORMATION AROUND A TILLAGE TOOL USING COMPUTATIONAL FLUID DYNAMICS , 2005 .

[17]  Toshitsugu Tanaka,et al.  3-D DEM simulation of cohesive soil-pushing behavior by bulldozer blade , 2012 .

[18]  Raymond D. Mindlin,et al.  Compliance of elastic bodies in contact , 1949 .

[19]  J. V. Perumpral,et al.  A soil-tool interaction model for narrow tillage tools. , 1980 .

[20]  Dvoralai Wulfsohn,et al.  Constitutive model for high speed tillage using narrow tools , 1999 .

[21]  P. C. Payne,et al.  The relationship between the mechanical properties of soil and the performance of simple cultivation implements , 1956 .

[22]  Chris Saunders,et al.  A force prediction model for mouldboard ploughs incorporating the effects of soil characteristic properties, plough geometric factors and ploughing speed , 2007 .

[23]  C. Plouffe,et al.  VALIDATIONS OF MOLDBOARD PLOW SIMULATIONS WITH FEM ON A CLAY SOIL , 1999 .

[24]  C. Plouffe,et al.  MOLDBOARD PLOW PERFORMANCE IN A CLAY SOIL: SIMULATIONS AND EXPERIMENT , 1999 .

[25]  Josephine M. Boac,et al.  MATERIAL AND INTERACTION PROPERTIES OF SELECTED GRAINS AND OILSEEDS FOR MODELING DISCRETE PARTICLES , 2010 .

[26]  Abdul Mounem Mouazen,et al.  Finite element analysis of subsoiler cutting in non-homogeneous sandy loam soil , 1999 .

[27]  A. J. Koolen,et al.  Simulation of a soil loosening process by means of the modified distinct element method , 2002 .

[28]  F. Maio,et al.  Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codes , 2004 .

[29]  D. C. Erbach,et al.  Change in Soil Microtopography by Tillage with a Sweep , 1993 .

[30]  Reza Alimardani,et al.  A Two Dimensional Finite Element Analysis of a Plane Tillage Tool in Soil Using a Non-linear Elasto-Plastic Model , 2008 .

[31]  Itzhak Shmulevich,et al.  Determination of discrete element model parameters required for soil tillage , 2007 .

[32]  Itzhak Shmulevich,et al.  Evaluation of link-track performances using DEM , 2006 .

[33]  Richard J. Godwin,et al.  Soil Failure with Narrow Tines , 1977 .

[34]  B. Das.  Advanced Soil Mechanics , 2019 .

[35]  John M. Fielke.  Interactions of the Cutting Edge of Tillage Implements with Soil , 1996 .

[36]  Yao Yusu,et al.  A dynamic model for soil cutting by blade and tine , 1992 .

[37]  R. L. Kushwaha,et al.  Finite Element Analysis of the Dynamic Interaction Between Soil and Tillage Tool , 1995 .

[38]  Bin Chen,et al.  DEM Simulation of Clod Crushing by Bionic Bulldozing Plate , 2008 .

[39]  Seyed Reza,et al.  MODELLING OF ENERGY REQUIREMENTS BY A NARROW TILLAGE TOOL , 2006 .

[40]  Rui Zhang,et al.  Simulation on mechanical behavior of cohesive soil by Distinct Element Method , 2006 .

[41]  Ying Chen,et al.  Simulating shear behavior of a sandy soil under different soil conditions , 2011 .

[42]  Edward McKyes,et al.  The cutting of soil by narrow blades , 1977 .

[43]  Akira Oida,et al.  Simulation of soil deformation and resistance at bar penetration by the Distinct Element Method , 2000 .

[44]  John M. Fielke,et al.  Finite element modelling of the interaction of the cutting edge of tillage implements with soil , 1999 .

[45]  James G. Hendrick,et al.  Soil Reaction to High Speed Cutting , 1973 .

[46]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .