Development of Mach Scale Rotors with Tailored Composite Coupling for Vibration Reduction

This paper presents the design, structural and aeroelastic analyses, fabrication, and structural tests of Mach-scale articulated composite rotors with tailored flap-bending/torsion couplings for vibration reduction. The rotor design was nominally based on the UH-60 Black Hawk rotor. A new fabrication process was developed to manufacture Mach-scale composite tailored blade. Five sets of Mach-scale composite tailored rotors were successfully fabricated in-house, including a baseline rotor without coupling, two rotors with uniform spanwise flap-bending/torsion couplings, and two rotors with spanwise segmented flap-bending/torsion couplings. Bench-top and nonrotating dynamic tests were performed to verify the structural analysis of these composite tailored blades. The measured results correlated well with predictions. Comprehensive aeroelastic analysis (using University of Maryland Advanced Rotorcraft Code) of these Mach-scale composite tailored rotors indicated that blade elastic flap-bending/ torsion couplings can significantly impact rotor vibration characteristics. It was shown that spanwise segmented flap-bending/torsion couplings can provide larger rotor vibration reduction than uniform spanwise couplings.

[1]  Inderjit Chopra,et al.  Aeroelastic Stability Analysis of a Composite Rotor Blade , 1985 .

[2]  John Dugundji,et al.  Experiments and analysis for composite blades under large deflections. II - Dynamic behavior , 1990 .

[3]  Inderjit Chopra,et al.  Aeroelastic optimization of a helicopter rotor to reduce vibration and dynamic stresses , 1996 .

[4]  E. Smith,et al.  Formulation and evaluation of an analytical model for composite box-beams , 1991 .

[5]  Inderjit Chopra,et al.  Experimental-theoretical investigation of the vibration characteristics of rotating composite box beams , 1992 .

[6]  Dewey H. Hodges,et al.  Aeroelastic stability of composite hingeless rotor blades in hover-Part II: Results , 1993 .

[7]  Inderjit Chopra,et al.  Analytical-experimental investigation of free-vibration characteristics of rotating composite I-beams , 1993 .

[8]  Inderjit Chopra,et al.  Aeroelastic Analysis of a Composite Bearingless Rotor in Forward Flight Using an Improved Warping Model , 1995 .

[9]  Inderjit Chopra,et al.  Aeroelastic Stability Investigation of a Composite Hingeless Rotor in Hover , 1998 .

[10]  O. Rand.  Experimental investigation of periodically excited rotating composite rotor blades , 1991 .

[11]  Inderjit Chopra,et al.  Structural response of composite beams and blades with elastic couplings , 1992 .

[12]  Terry Ford.  New Shape in the Sky , 1985 .

[13]  Inderjit Chopra,et al.  Experimental and theoretical analysis of composite I-beams with elastic couplings , 1991 .

[14]  W Nixon Mark,et al.  Aeroelastic Response and Stability of Tiltrotors with Elastically-Coupled Composite Rotor Blades , 1993 .

[15]  Inderjit Chopra,et al.  Refined Structural Model for Thin- and Thick-Walled Composite Rotor Blades , 2002 .

[16]  P. Friedmann,et al.  Aeroelastic behavior of composite rotor blades with swept tips , 1992 .

[17]  Edward C. Smith,et al.  Aeroelastic response, loads, and stability of a composite rotor in forward flight , 1993 .

[18]  Mark W. Nixon,et al.  Extension-twist coupling of composite circular tubes with application to tilt rotor blade design , 1987 .

[19]  Peretz Friedman,et al.  Aeroelastic stability, response and loads of swept tip composite rotor blades in forward flight , 1994 .

[20]  Inderjit Chopra,et al.  Assessment of Composite Rotor Blade Modeling Techniques , 1999 .

[21]  Olivier A. Bauchau,et al.  Composite Box Beam Analysis: Theory and Experiments , 1987 .

[22]  Peretz P. Friedmann,et al.  Structural optimization for vibratory loads reduction of composite helicopter rotor blades with advanced geometry tips , 1998 .