Scaling effects on combustion modes in a single-side expansion kerosene-fueled scramjet combustor

[1]  Jincheng Zhang,et al.  Experimental study of flame stabilization in a single-side expansion scramjet combustor with different cavity length-to-depth ratios , 2020 .

[2]  Zhenguo Wang,et al.  Dynamic characteristics of a gliding arc plasma-assisted ignition in a cavity-based scramjet combustor , 2020 .

[3]  Donggang Cao,et al.  Impact of Fuel Injection Distribution and Flow Rate on Flame Anchoring in a Cavity-Stabilized Scramjet , 2020 .

[4]  Zun Cai,et al.  Effects of Additional Cavity Floor Injection on the Ignition and Combustion Processes in a Mach 2 Supersonic Flow , 2020, Energies.

[5]  Jun-tao Chang,et al.  Flame Interaction Characteristics in Scramjet Combustor Equipped with Strut/Wall Combined Fuel Injectors , 2020, Combustion Science and Technology.

[6]  Zhenguo Wang,et al.  Design and analysis of a hypersonic inlet with an integrated bump/forebody , 2019, Chinese Journal of Aeronautics.

[7]  Chen Kong,et al.  Flame oscillation characteristics in a kerosene fueled dual mode combustor equipped with thin strut flameholder , 2019, Acta Astronautica.

[8]  Ye Tian,et al.  Investigation of ignition characteristics in a kerosene fueled supersonic combustor , 2019, Acta Astronautica.

[9]  B. Wang,et al.  Numerical studies on supersonic spray combustion in high-temperature shear flows in a scramjet combustor , 2018, Chinese Journal of Aeronautics.

[10]  Zhenguo Wang,et al.  Experiments on flame stabilization in a scramjet combustor with a rear-wall-expansion cavity , 2017 .

[11]  J. Le,et al.  Experimental research of air-throttling ignition for a scramjet at Ma 6.5 , 2017 .

[12]  Cao Changmin,et al.  Large eddy simulation of hydrogen/air scramjet combustion using tabulated thermo-chemistry approach , 2015 .

[13]  W. Jianli,et al.  Construction of Autoignition Mechanisms for the Combustion of RP-3 Surrogate Fuel and Kinetics Simulation , 2015 .

[14]  Haiyan Wu,et al.  Combustion modes of hydrogen jet combustion in a cavity-based supersonic combustor , 2013 .

[15]  Ning Qin,et al.  Combustion characteristics in a supersonic combustor with hydrogen injection upstream of cavity flameholder , 2013 .

[16]  L. Jialing,et al.  Analysis and Correlation of Flame Stability Limits in Supersonic Flow with Cavity Flameholder , 2012 .

[17]  Wenya Song,et al.  Experimental and Numerical Studies of Vitiated Air Effects on Hydrogen-fueled Supersonic Combustor Performance , 2012 .

[18]  Bernhard Weigand,et al.  Effects of Staged Injection on Supersonic Mixing and Combustion , 2011 .

[19]  Ramanan Sankaran,et al.  Three-dimensional direct numerical simulation of a turbulent lifted hydrogen jet flame in heated coflow: flame stabilization and structure , 2009, Journal of Fluid Mechanics.

[20]  Zhenguo Wang,et al.  Experimental and Numerical Study on Flame Stabilization in a Supersonic Combustor with Hydrogen Injection Upstream of Cavity Flameholders , 2009 .

[21]  J. Driscoll,et al.  Combustion characteristics of a dual-mode scramjet combustor with cavity flameholder , 2009 .

[22]  S. O’Byrne,et al.  Investigation of Supersonic Combustion with Angled Injection in a Cavity-Based Combustor , 2008 .

[23]  Wang Zhenguo,et al.  Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance , 2007 .

[24]  James F. Driscoll,et al.  Correlation and Analysis of Blowout Limits of Flames in High-Speed Airflows , 2005 .

[25]  Luo Ming,et al.  Experimental Investigation of Hydrocarbon-fuel Ignition in Scramjet Combustor , 2004 .

[26]  R. Bowersox,et al.  Stirred Reactor Analysis of Cavity Flame Holders for Scramjets , 1997 .