Guided in Situ Polymerization of MEH-PPV in Mesoporous Titania Photoanodes.

Incorporation of conjugated polymers into porous metal oxide networks is a challenging task, which is being pursued via many different approaches. We have developed the guided in situ polymerization of poly(2-methoxy-5-(2'-ethylhexyloxy)-p-phenylenevinylene) (MEH-PPV) in porous titania films by means of surface functionalization. The controlled polymerization via the Gilch route was induced by an alkoxide base and by increasing the temperature. The selected and specially designed surface-functionalizing linker molecules mimic the monomer or its activated form, respectively. In this way, we drastically enhanced the amount of MEH-PPV incorporated into the porous titania phase compared to nonfunctionalized samples by a factor of 6. Additionally, photovoltaic measurements were performed. The devices show shunting or series resistance limitations, depending on the surface functionalization prior to in situ polymerization of MEH-PPV. We suggest that the reason for this behavior can be found in the orientation of the grown polymer chains with respect to the titania surface. Therefore, the geometry of the anchoring via the linker molecules is relevant for exploiting the full electronic potential of the conjugated polymer in the resulting hybrid composite. This observation will help to design future synthesis methods for new hybrid materials from conjugated polymers and n-type semiconductors to take full advantage of favorable electronic interactions between the two phases.

[1]  M. Mezouar,et al.  High Pressure Polymerization in a Confined Space: Conjugated Chain/Zeolite Nanocomposites , 2014 .

[2]  M. Toney,et al.  A general relationship between disorder, aggregation and charge transport in conjugated polymers. , 2013, Nature materials.

[3]  Robert J. Ono,et al.  Controlled catalyst transfer polycondensation and surface-initiated polymerization of a p-phenyleneethynylene-based monomer. , 2013, Journal of the American Chemical Society.

[4]  Jenna A. Bilbrey,et al.  Palladium-Mediated Surface-Initiated Kumada Catalyst Polycondensation: A Facile Route Towards Oriented Conjugated Polymers. , 2012, Macromolecular rapid communications.

[5]  H. Snaith,et al.  Pore Filling of Spiro‐OMeTAD in Solid‐State Dye‐Sensitized Solar Cells Determined Via Optical Reflectometry , 2012 .

[6]  Omar Azzaroni,et al.  Polymer brushes here, there, and everywhere: Recent advances in their practical applications and emerging opportunities in multiple research fields , 2012 .

[7]  T. Bein,et al.  Multilayered High Surface Area “Brick and Mortar” Mesoporous Titania Films as Efficient Anodes in Dye-Sensitized Solar Cells , 2012 .

[8]  Michael Sommer,et al.  Kumada Catalyst-Transfer Polycondensation: Mechanism, Opportunities, and Challenges. , 2011, Macromolecular rapid communications.

[9]  Henry J. Snaith,et al.  Facile infiltration of semiconducting polymer into mesoporous electrodes for hybrid solar cells , 2011 .

[10]  H. Snaith,et al.  Obviating the requirement for oxygen in SnO2-based solid-state dye-sensitized solar cells , 2011, Nanotechnology.

[11]  Tie-hu Li,et al.  In situ 3-hexylthiophene polymerization onto surface of TiO2 based hybrid solar cells , 2010 .

[12]  I. Samuel,et al.  Thickness dependent absorption spectra in conjugated polymers: Morphology or interference? , 2010 .

[13]  M. C. Stuart,et al.  Emerging applications of stimuli-responsive polymer materials. , 2010, Nature materials.

[14]  M. Wasielewski,et al.  Designed Bithiophene-Based Interfacial Layer for High-Efficiency Bulk-Heterojunction Organic Photovoltaic Cells. Importance of Interfacial Energy Level Matching , 2010 .

[15]  M. Rehahn,et al.  The Gilch Synthesis of Poly(p-phenylene vinylenes): Mechanistic Knowledge in the Service of Advanced Materials. , 2009, Macromolecular rapid communications.

[16]  Seth B Darling,et al.  Improved hybrid solar cells via in situ UV polymerization. , 2009, Small.

[17]  C. Sanchez,et al.  Mechanistic Insight into Surface-Initiated Polymerization of Methyl Methacrylate and Styrene via ATRP from Ordered Mesoporous Silica Particles , 2009 .

[18]  Y. Sung,et al.  Photoelectrochemical oxidative polymerization of aniline and its application to transparent TiO2 solar cells , 2009 .

[19]  T. Bein,et al.  Brick and Mortar Strategy for the Formation of Highly Crystalline Mesoporous Titania Films from Nanocrystalline Building Blocks , 2009 .

[20]  G. Whitesides,et al.  Laterally Ordered Bulk Heterojunction of Conjugated Polymers: Nanoskiving a Jelly Roll , 2008 .

[21]  Matthew C. Davis,et al.  Procedure for the Rapid Synthesis of the Monomer 1,4-Bis(chloromethyl)-2-(2-ethylhexyloxy)-5-methoxybenzene , 2008 .

[22]  Peidong Yang,et al.  Silicon nanowire radial p-n junction solar cells. , 2008, Journal of the American Chemical Society.

[23]  Jan Genzer,et al.  Effect of Substrate Geometry on Polymer Molecular Weight and Polydispersity during Surface-Initiated Polymerization , 2008 .

[24]  P. Liska,et al.  Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10 , 2008 .

[25]  H. Ohkita,et al.  Design of Multilayered Nanostructures and Donor–Acceptor Interfaces in Solution‐Processed Thin‐Film Organic Solar Cells , 2008 .

[26]  D. Hertel,et al.  Photoconduction in amorphous organic solids. , 2008, Chemphyschem : a European journal of chemical physics and physical chemistry.

[27]  M. Rehahn,et al.  Toward Controlled Gilch Synthesis of Poly(p-phenylene vinylenes): Anionic vs Radical Chain Propagation, a Mechanistic Reinvestigation , 2007 .

[28]  M. Rehahn,et al.  Toward Controlled Gilch Synthesis of Poly(p-phenylenevinylenes): Synthesis and Thermally Induced Polymerization of α-Bromo-p-quinodimethanes , 2007 .

[29]  D. Tennant,et al.  Chemical modification of the electronic conducting states in polymer nanodevices. , 2007, Nature nanotechnology.

[30]  Stephan Kirchmeyer,et al.  Polymerelektronik – zwischen Materialien und Prozessen , 2006 .

[31]  Chengwei Wang,et al.  Surface-initiated growth of conjugated polymers for functionalization of electronically active nanoporous networks: synthesis, structure and optical properties , 2006 .

[32]  S. Patil,et al.  Effect of intermolecular disorder on the intrachain charge transport in ladder-type poly( p -phenylenes) , 2006 .

[33]  C. Jing,et al.  Synthesis and characterization of exfoliated MEH-PPV/clay nanocomposites by in situ polymerization , 2005 .

[34]  Jurjen Wildeman,et al.  Simultaneous enhancement of charge transport and exciton diffusion in poly(p-phenylene vinylene) derivatives , 2005 .

[35]  Jörg Rissler,et al.  Effective conjugation length of π-conjugated systems , 2004 .

[36]  B. Ferrer,et al.  Increasing the Stability of Electroluminescent Phenylenevinylene Polymers by Encapsulation in Nanoporous Inorganic Materials , 2004 .

[37]  Yunzhi Liu,et al.  Infiltrating Semiconducting Polymers into Self‐Assembled Mesoporous Titania Films for Photovoltaic Applications , 2003 .

[38]  D. Vanderzande,et al.  Verification of Radical and Anionic Polymerization Mechanisms in the Sulfinyl and the Gilch Route , 2003 .

[39]  K. Matyjaszewski,et al.  Organic—Inorganic Hybrid Materials from Polysiloxanes and Polysilsesquioxanes Using Controlled/Living Radical Polymerization , 2003 .

[40]  G. Stucky,et al.  Benzyl alcohol and titanium tetrachloride - A versatile reaction system for the nonaqueous and low-temperature preparation of crystalline and luminescent titania nanoparticles , 2002 .

[41]  S. Quideau,et al.  Electrochemically-induced spirolactonization of alpha-(methoxyphenoxy)alkanoic acids into quinone ketals. , 2002, The Journal of organic chemistry.

[42]  Krzysztof Matyjaszewski,et al.  Synthesis of Nanocomposite Organic/Inorganic Hybrid Materials Using Controlled/“Living” Radical Polymerization , 2001 .

[43]  A. Heeger,et al.  Semiconducting and Metallic Polymers: The Fourth Generation of Polymeric Materials , 2001, Angewandte Chemie.

[44]  R. Laine,et al.  Organic–Inorganic Nanocomposites with Completely Defined Interfacial Interactions , 2001 .

[45]  L. Liang,et al.  Thermosensitive Poly(N-isopropylacrylamide)−Clay Nanocomposites with Enhanced Temperature Response , 2000 .

[46]  P. Dubois,et al.  Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials , 2000 .

[47]  John P. Ferraris,et al.  MEH-PPV: Improved synthetic procedure and molecular weight control , 2000 .

[48]  Soo Jin Chua,et al.  Fully soluble poly(p-phenylenevinylene)s via propagation control of the polymer chain conjugated lengths , 2000 .

[49]  U. Stalmach,et al.  Effective conjugation length and UV/vis spectra of oligomers , 1997 .

[50]  T. Bein,et al.  Conducting Carbon Wires in Ordered, Nanometer-Sized Channels , 1994, Science.

[51]  Chun-Guey Wu,et al.  Conducting Polyaniline Filaments in a Mesoporous Channel Host , 1994, Science.

[52]  Bruce M. Novak,et al.  Hybrid nanocomposite materials―between inorganic glasses and organic polymers , 1993 .

[53]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[54]  R. N. Marks,et al.  Light-emitting diodes based on conjugated polymers , 1990, Nature.

[55]  R. N. Marks,et al.  Light-emitting diodes based on conjugated polymers , 1990, Nature.

[56]  R. Silbey,et al.  Chain-length dependence of electronic and electrochemical properties of conjugated systems: polyacetylene, polyphenylene, polythiophene, and polypyrrole , 1983 .

[57]  R. Grigorovici,et al.  Optical Properties and Electronic Structure of Amorphous Germanium , 1966, 1966.

[58]  H. G. Gilch,et al.  Polymerization of α‐halogenated p‐xylenes with base , 1966 .

[59]  J. Gould,et al.  Polymer Electronics , 2004 .

[60]  Ignacio B. Martini,et al.  Controlling Interchain Interactions in Conjugated Polymers: The Effects of Chain Morphology on Exciton-Exciton Annihilation and Aggregation in MEH-PPV Films , 2000 .

[61]  R. Neumann,et al.  Poly(phenylenevinylene) analogs with ring substituted polar side chains and their use in the formation of hydrogen bonding based self-assembled multilayers , 1998 .

[62]  W. Brütting,et al.  Charge Carrier Injection and Transport in PPV Light Emitting Devices , 1997 .