Nanocomposites of poly(ether ether ketone) with carbon nanofibers: Effects of dispersion and thermo-oxidative degradation on development of linear viscoelasticity and crystallinity

[1]  D. Kalyon,et al.  Cross-link density, viscoelasticity and swelling of hydrogels as affected by dispersion of multi-walled carbon nanotubes , 2010 .

[2]  T. Hull,et al.  Mechanism of thermal decomposition of poly(ether ether ketone) (PEEK) from a review of decomposition studies , 2010 .

[3]  F. Fisher,et al.  Polymer crystallization and precipitation‐induced wrapping of carbon nanofibers with PBT , 2009 .

[4]  F. Fisher,et al.  Deformation-induced crystallization and associated morphology development of carbon nanotube-PVDF nanocomposites. , 2009, Journal of nanoscience and nanotechnology.

[5]  D. Xiong,et al.  Influence of multi-walled carbon nanotubes on the cure behavior of epoxy-imidazole system , 2009 .

[6]  F. Fisher,et al.  Effects of Multiwalled Carbon Nanotubes on the Shear-Induced Crystallization Behavior of Poly(butylene terephthalate) , 2008 .

[7]  A. Iqbal,et al.  High performance thermoplastic composites: Study on the mechanical, thermal, and electrical resistivity properties of carbon fiber-reinforced polyetheretherketone and polyethersulphone , 2007 .

[8]  Derrick Dean,et al.  The effect of interfacial chemistry on molecular mobility and morphology of multiwalled carbon nanotubes epoxy nanocomposite , 2007 .

[9]  S. Ryu,et al.  Physical and chemical characteristics of multiwalled carbon nanotubes functionalized with aminosilane and its influence on the properties of natural rubber composites , 2007 .

[10]  Shaik Jeelani,et al.  Experimental study on the thermal and mechanical properties of multi-walled carbon nanotube-reinforced epoxy , 2007 .

[11]  Philip J. Rae,et al.  The mechanical properties of poly(ether-ether-ketone) (PEEK) with emphasis on the large compressive strain response , 2007 .

[12]  R. Krishnamoorti,et al.  Dispersion of Single-Walled Carbon Nanotubes in Poly(ε-caprolactone) , 2007 .

[13]  J. Grunlan,et al.  Effects of carbon nanotube fillers on the curing processes of epoxy resin‐based composites , 2006 .

[14]  Takuzo Aida,et al.  Dramatic effect of dispersed carbon nanotubes on the mechanical and electroconductive properties of polymers derived from ionic liquids. , 2006, Small.

[15]  Chuck Zhang,et al.  Effective amino-functionalization of carbon nanotubes for reinforcing epoxy polymer composites , 2006, Nanotechnology.

[16]  Zhi‐Kang Xu,et al.  Preparation and properties of the polyimide/multi-walled carbon nanotubes (MWNTs) nanocomposites , 2006 .

[17]  Qinghua Zhang,et al.  Dispersion and Rheological Aspects of SWNTs in Ultrahigh Molecular Weight Polyethylene , 2006 .

[18]  A. Turner,et al.  Polyetheretherketone as a biomaterial for spinal applications. , 2006, Biomaterials.

[19]  R. Verdejo,et al.  Carbon Nanofibers Allow Foaming of Semicrystalline Poly(ether ether ketone) , 2005 .

[20]  Karl Schulte,et al.  Thermo-mechanical properties of randomly oriented carbon/epoxy nanocomposites , 2005 .

[21]  Liangchi Zhang,et al.  Effective separation and alignment of long entangled carbon nanotubes in epoxy , 2005 .

[22]  W. Brittain,et al.  Polycarbonate carbon nanofiber composites , 2005 .

[23]  V. Altstädt,et al.  Tribological behaviour of carbon-nanofibre-reinforced poly(ether ether ketone) , 2004 .

[24]  Karl Schulte,et al.  Functionalisation effect on the thermo-mechanical behaviour of multi-wall carbon nanotube/epoxy-composites , 2004 .

[25]  E Drioli,et al.  New modified polyetheretherketone membrane for liver cell culture in biohybrid systems: adhesion and specific functions of isolated hepatocytes. , 2004, Biomaterials.

[26]  Takashi Kashiwagi,et al.  Flame retardant mechanism of polyamide 6–clay nanocomposites ☆ , 2004 .

[27]  D. Schiraldi,et al.  Processing, structure, and properties of fibers from polyester/carbon nanofiber composites , 2003 .

[28]  V. Altstädt,et al.  Carbon-nanofibre-reinforced poly(ether ether ketone) fibres , 2003 .

[29]  J. Kenny,et al.  Effects of single-walled carbon nanotube incorporation on the cure reaction of epoxy resin and its detection by Raman spectroscopy , 2003 .

[30]  J. Jang,et al.  Cure Behavior of the Liquid-Crystalline Epoxy/Carbon Nanotube System and the Effect of Surface Treatment of Carbon Fillers on Cure Reaction , 2002 .

[31]  J. Tour,et al.  Dispersion of Functionalized Carbon Nanotubes in Polystyrene , 2002 .

[32]  Philipp Werner,et al.  Carbon-nanofibre-reinforced poly(ether ether ketone) composites , 2002 .

[33]  D. Kalyon,et al.  Electrical properties of composites as affected by the degree of mixedness of the conductive filler in the polymer matrix , 2002 .

[34]  Rodney Andrews,et al.  Fabrication of Carbon Multiwall Nanotube/Polymer Composites by Shear Mixing , 2002 .

[35]  Joerg Mayer,et al.  Distribution and alignment of carbon nanotubes and nanofibrils in a polymer matrix , 2002 .

[36]  K. Lozano,et al.  Nanofiber‐reinforced thermoplastic composites. I. Thermoanalytical and mechanical analyses , 2001 .

[37]  David P. Anderson,et al.  Strength prediction of partially aligned discontinuous fiber-reinforced composites , 2001 .

[38]  Jun Liu,et al.  Surfactant-assisted processing of carbon nanotube/polymer composites , 2000 .

[39]  R. Larson.  The Structure and Rheology of Complex Fluids , 1998 .

[40]  D. Kalyon,et al.  Degree of Mixing Analyses of Concentrated Suspensions by Electron Probe and X-Ray Diffraction , 1993 .

[41]  A. Jonas,et al.  Thermal-stability and Crystallization of Poly(aryl Ether Ether Ketone) , 1991 .

[42]  D. Wiles,et al.  Thermal degradation of poly(aryl-ether−ether-ketone) (PEEK): a differential scanning calorimetry study , 1988 .

[43]  D. J. Blundell,et al.  The morphology of poly(aryl-ether-ether-ketone) , 1983 .

[44]  D. Kalyon,et al.  Heat transfer and microstructure in extrusion blowmolding , 1983 .

[45]  D. Kalyon,et al.  An integrated experimental study of the injection molding behavior of some polyethylene resins , 1980 .