Alternatives for upgrading the EU DCLL breeding blanket from MMS to SMS

Abstract In the last years, CIEMAT worked in the development of a low temperature DCLL breeding blanket design aimed at using conventional materials and technologies. It followed the multi-module segment (MMS) approach, which allows operating within the thermal range tolerated by EUROFER while keeping a low bulk velocity of the self-cooled liquid breeder (PbLi) in the breeding zone. Thinking in the commercial exploitation of fusion, it must be taken into account that there is risk that the foreseen availability goal in fusion reactors is not achieved. In that case, the limited net efficiency of low temperature blankets could not be sufficient to obtain a competitive cost of the electricity. For that reason, more advanced blanket solutions are being explored with the objective of developing a simpler, more reliable and more efficient design based on a single-module segment (SMS) architecture and the use of self-cooled incompressible liquid breeder. In this work, different strategies to solve interrelated aspects like the topology and electrical insulation of the breeder circuits, the first wall integration and the main neutronic responses are analysed and discussed.

[1]  V. Gnielinski.  New equations for heat and mass transfer in turbulent pipe and channel flow , 1976 .

[2]  Daniele Martelli,et al.  Literature review of lead-lithium thermophysical properties , 2019, Fusion Engineering and Design.

[3]  J. F. Briesmeister.  MCNP-A General Monte Carlo N-Particle Transport Code , 1993 .

[4]  Robert Danzer,et al.  Mechanical Characterization of Ceramics: Designing with Brittle Materials , 2014 .

[5]  I. Palermo,et al.  Conceptual Design of the EU-DEMO Dual Coolant Lithium Lead Equatorial Module , 2016, IEEE Transactions on Plasma Science.

[6]  J. A. Shercliff.  Steady motion of conducting fluids in pipes under transverse magnetic fields , 1953, Mathematical Proceedings of the Cambridge Philosophical Society.

[7]  C. Mistrangelo,et al.  Three-dimensional magneto convective flows in geometries relevant for DCLL blankets , 2020 .

[8]  S. Molokov,et al.  Magnetohydrodynamic flow in a right-angle bend in a strong magnetic field , 1996 .

[9]  Yican Wu,et al.  CAD-based interface programs for fusion neutron transport simulation , 2009 .

[10]  Christian Bachmann,et al.  Optimization of DEMO geometry and disruption location prediction , 2019, Fusion Engineering and Design.

[11]  J. I. Linares,et al.  Supercritical CO2 Brayton power cycles for DEMO fusion reactor based on Helium Cooled Lithium Lead blanket , 2015 .

[12]  David Rapisarda,et al.  Thermal-hydraulic design of a DCLL breeding blanket for the EU DEMO , 2017 .

[13]  David Ward,et al.  Revised assessments of the economics of fusion power , 2009 .

[14]  Evaldas Bubelis,et al.  Comparative analysis of the efficiency of a CO2-cooled and a He-cooled pebble bed breeding blanket for the EU DEMO fusion reactor , 2019, Fusion Engineering and Design.

[15]  Eric W. Lemmon,et al.  Thermophysical Properties of Fluid Systems , 1998 .

[16]  P. Hertout,et al.  Conceptual design for the superconducting magnet system of a pulsed DEMO reactor , 2013 .

[17]  E. Diegele,et al.  Present development status of EUROFER and ODS-EUROFER for application in blanket concepts , 2005 .

[18]  David Rapisarda,et al.  Magnetohydrodynamic and thermal analysis of PbLi flows in poloidal channels with flow channel insert for the EU-DCLL blanket , 2018, Nuclear Fusion.

[19]  M. Rieth,et al.  European materials development: Results and perspective , 2019, Fusion engineering and design.

[20]  George D Quinn.  Flexure Strength of Advanced Ceramics - A Round Robin Exercise , 1989 .

[21]  David Ward,et al.  A model of the availability of a fusion power plant , 2000 .

[22]  Thanh Q. Hua,et al.  NHD Considerations for Poloidal-Toroidal Coolant Ducts of Self-Cooled Blankets , 1991 .

[23]  David Rapisarda,et al.  Remarks on the performance of the EU DCLL breeding blanket adapted to DEMO 2017 , 2020, Fusion Engineering and Design.

[24]  David Rapisarda,et al.  Large-scale behavior of sandwich-like FCI components within the EU-DCLL operational conditions , 2018, Fusion Engineering and Design.

[25]  Yican Wu,et al.  Design status and development strategy of China liquid lithium-lead blankets and related material technology , 2007 .

[26]  Mark S. Tillack,et al.  Fusion power core engineering for the ARIES-ST power plant , 2003 .

[27]  F. García Ferré,et al.  Multifunctional nanoceramic coatings for future generation nuclear systems , 2019, Fusion Engineering and Design.