Physical modeling of polymer-electrolyte membrane fuel cells: Understanding water management and impedance spectra

[1]  Joseph J. Beaman,et al.  Modeling Water Transport and Swelling in Polymer Electrolyte Membranes , 2010, ECS Transactions.

[2]  J. Benziger,et al.  Water Sorption, Desorption and Transport in Nafion Membranes , 2007, ECS Transactions.

[3]  T. Bednarek,et al.  Calculation of effective transport properties of partially saturated gas diffusion layers , 2017 .

[4]  Z. Abdin,et al.  PEM fuel cell model and simulation in Matlab–Simulink based on physical parameters , 2016 .

[5]  T. Morawietz,et al.  Quantitative in Situ Analysis of Ionomer Structure in Fuel Cell Catalytic Layers. , 2016, ACS applied materials & interfaces.

[6]  K. Kudo,et al.  Humidity and Temperature Dependences of Oxygen Transport Resistance of Nafion Thin Film on Platinum Electrode , 2016 .

[7]  Mohsen Ghazikhani,et al.  Numerical and experimental investigation on effects of inlet humidity and fuel flow rate and oxidant on the performance on polymer fuel cell , 2016 .

[8]  Cesare Pianese,et al.  Performance and degradation of Proton Exchange Membrane Fuel Cells: State of the art in modeling from atomistic to system scale , 2016 .

[9]  Chaoyang Wang,et al.  Three Dimensional Computations and Experimental Comparisons for a Large-Scale Proton Exchange Membrane Fuel Cell , 2016 .

[10]  A. Kucernak,et al.  Performance measurements and modelling of the ORR on fuel cell electrocatalysts – the modified double trap model , 2015 .

[11]  S. Litster,et al.  Gas Transport Resistance in Polymer Electrolyte Thin Films on Oxygen Reduction Reaction Catalysts. , 2015, Langmuir : the ACS journal of surfaces and colloids.

[12]  Brian P. Setzler,et al.  A Physics-Based Impedance Model of Proton Exchange Membrane Fuel Cells Exhibiting Low-Frequency Inductive Loops , 2015 .

[13]  Liang Hao,et al.  Modeling and Experimental Validation of Pt Loading and Electrode Composition Effects in PEM Fuel Cells , 2015 .

[14]  Steffen Müthing,et al.  A flexible framework for multi physics and multi domain PDE simulations , 2015 .

[15]  A. Kulikovsky.  How important is Oxygen Transport in agglomerates in a PEM fuel cell catalyst layer , 2014 .

[16]  Ahmet Kusoglu,et al.  A Critical Review of Modeling Transport Phenomena in Polymer-Electrolyte Fuel Cells , 2014 .

[17]  Suresh G. Advani,et al.  An Improved Agglomerate Model for the PEM Catalyst Layer with Accurate Effective Surface Area Calculation Based on the Sphere-Packing Approach , 2014 .

[18]  K. Karan,et al.  Proton Transport Property in Supported Nafion Nanothin Films by Electrochemical Impedance Spectroscopy , 2014 .

[19]  K. Kreuer,et al.  The role of internal pressure for the hydration and transport properties of ionomers and polyelectrolytes , 2013 .

[20]  N. Nonoyama,et al.  An Experimental Study of the Effects of Operational History on Activity Changes in a PEMFC , 2013 .

[21]  A. Putz,et al.  Investigation of the ORR Using the Double-Trap Intrinsic Kinetic Model , 2013 .

[22]  M. Moein-Jahromi,et al.  Performance prediction of PEM fuel cell cathode catalyst layer using agglomerate model , 2012 .

[23]  Bruno G. Pollet,et al.  Ex-situ characterisation of gas diffusion layers for proton exchange membrane fuel cells , 2012 .

[24]  Toshihiko Yoshida,et al.  Analysis and modeling of PEMFC degradation: Effect on oxygen transport , 2012 .

[25]  Wenbin Gu,et al.  Impact of Platinum Loading and Catalyst Layer Structure on PEMFC Performance , 2012 .

[26]  Andreas Dedner,et al.  Advances in DUNE , 2012 .

[27]  F. Büchi,et al.  Saturation Dependent Effective Transport Properties of PEFC Gas Diffusion Layers , 2012 .

[28]  Ahmet Kusoglu,et al.  Water Uptake of Fuel-Cell Catalyst Layers , 2012 .

[29]  Joseph J. Beaman,et al.  Dynamic Thermal, Transport and Mechanical Model of Fuel Cell Membrane Swelling , 2011 .

[30]  Ahmet Kusoglu,et al.  Correlating humidity-dependent ionically conductive surface area with transport phenomena in proton-exchange membranes. , 2011, The journal of physical chemistry. B.

[31]  Steffen Müthing,et al.  DuMux: DUNE for multi-{phase,component,scale,physics,…} flow and transport in porous media , 2011 .

[32]  S. Kær,et al.  Water balance simulations of a polymer-electrolyte membrane fuel cell using a two-fluid model , 2011 .

[33]  Rainer Helmig,et al.  A new approach for phase transitions in miscible multi-phase flow in porous media , 2011 .

[34]  Alfredo Iranzo,et al.  Numerical model for the performance prediction of a PEM fuel cell. Model results and experimental va , 2010 .

[35]  Hyoung-Juhn Kim,et al.  Effect of ionomer content and relative humidity on polymer electrolyte membrane fuel cell (PEMFC) performance of membrane-electrode assemblies (MEAs) prepared by decal transfer method , 2010 .

[36]  Søren Knudsen Kær,et al.  A study of multi-phase flow through the cathode side of an interdigitated flow field using a multi-fluid model , 2010 .

[37]  K. Friedrich,et al.  Investigation of Locally Resolved Current Density Distribution of Segmented PEM Fuel Cells to Detect Malfunctions , 2010 .

[38]  G. C. Sarti,et al.  Non-Fickian Diffusion of Water In Nafion , 2010 .

[39]  S. Kjelstrup,et al.  Ex situ measurements of through-plane thermal conductivities in a polymer electrolyte fuel cell , 2010 .

[40]  J. Jur,et al.  Measuring oxygen, carbon monoxide and hydrogen sulfide diffusion coefficient and solubility in Nafion membranes , 2009, 1108.2438.

[41]  S. Kær,et al.  A Computational Analysis of Multiphase Flow Through PEMFC Cathode Porous Media Using the Multifluid Approach , 2009 .

[42]  Walter Mérida,et al.  Water transport in liquid and vapour equilibrated Nafion™ membranes , 2009 .

[43]  Akeel A. Shah,et al.  Modeling and Simulation of the Degradation of Perfluorinated Ion-Exchange Membranes in PEM Fuel Cells , 2009 .

[44]  Gareth Hinds,et al.  Novel in-situ measurements of relative humidity in a polymer electrolyte membrane fuel cell. , 2009 .

[45]  Andreas Dedner,et al.  A generic grid interface for parallel and adaptive scientific computing. Part I: abstract framework , 2008, Computing.

[46]  Andreas Dedner,et al.  A generic grid interface for parallel and adaptive scientific computing. Part II: implementation and tests in DUNE , 2008, Computing.

[47]  Jon G. Pharoah,et al.  A comparison of different approaches to modelling the PEMFC catalyst layer , 2008 .

[48]  J. Benziger,et al.  Non-Fickian water vapor sorption dynamics by Nafion membranes. , 2008, The journal of physical chemistry. B.

[49]  A. Russell.  Electrocatalysis: theory and experiment at the interface. Preface. , 2008, Faraday discussions.

[50]  Junliang Zhang,et al.  Intrinsic kinetic equation for oxygen reduction reaction in acidic media: the double Tafel slope and fuel cell applications. , 2008, Faraday discussions.

[51]  Junliang Zhang,et al.  Double-trap kinetic equation for the oxygen reduction reaction on Pt(111) in acidic media. , 2007, The journal of physical chemistry. A.

[52]  Mathias Schulze,et al.  Segmented cells as tool for development of fuel cells and error prevention/prediagnostic in fuel cell stacks , 2007 .

[53]  W. Bessler.  Rapid Impedance Modeling via Potential Step and Current Relaxation Simulations , 2007 .

[54]  J. Jorné,et al.  Study of the Exchange Current Density for the Hydrogen Oxidation and Evolution Reactions , 2007 .

[55]  Afzal Suleman,et al.  Multi-variable optimization of PEMFC cathodes using an agglomerate model , 2007 .

[56]  Mathias Schulze,et al.  Diagnostic Tools for in-situ and ex-situ investigations of fuel cells and components at the German Aerospace Center , 2007 .

[57]  James M. Fenton,et al.  Investigation of platinum oxidation in PEM fuel cells at various relative humidities , 2007 .

[58]  H. Toghiani,et al.  Steady state and dynamic performance of proton exchange membrane fuel cells (PEMFCs) under various operating conditions and load changes , 2006 .

[59]  Hubert A. Gasteiger,et al.  Determination of Catalyst Unique Parameters for the Oxygen Reduction Reaction in a PEMFC , 2006 .

[60]  Hans Müller-Steinhagen,et al.  Modeling non-isothermal two-phase multicomponent flow in the cathode of PEM fuel cells , 2006 .

[61]  Denis Roizard,et al.  On Schroeder's paradox , 2006 .

[62]  Michael Eikerling,et al.  Water Management in Cathode Catalyst Layers of PEM Fuel Cells A Structure-Based Model , 2006 .

[63]  I. Hsing,et al.  Absorption, Desorption, and Transport of Water in Polymer Electrolyte Membranes for Fuel Cells , 2005 .

[64]  K. Karan,et al.  An improved two-dimensional agglomerate cathode model to study the influence of catalyst layer structural parameters , 2005 .

[65]  A. Weber,et al.  Transport in Polymer-Electrolyte Membranes II. Mathematical Model , 2004 .

[66]  Robert M. Darling,et al.  Kinetic Model of Platinum Dissolution in PEMFCs , 2003 .

[67]  Jeremy P. Meyers,et al.  Simulation of the Direct Methanol Fuel Cell I. Thermodynamic Framework for a Multicomponent Membrane , 2002 .

[68]  G. Janssen,et al.  A Phenomenological Model of Water Transport in a Proton Exchange Membrane Fuel Cell , 2001 .

[69]  Rainer Helmig,et al.  Node-centered finite volume discretizations for the numerical simulation of multiphase flow in heterogeneous porous media , 2000 .

[70]  A. Kornyshev,et al.  Phenomenological theory of electro-osmotic effect and water management in polymer electrolyte proton-conducting membranes , 1998 .

[71]  R. Helmig.  Multiphase Flow and Transport Processes in the Subsurface: A Contribution to the Modeling of Hydrosystems , 2011 .

[72]  Felix N. Büchi,et al.  Operating Proton Exchange Membrane Fuel Cells Without External Humidification of the Reactant Gases Fundamental Aspects , 1997 .

[73]  H. Rentz-Reichert,et al.  UG – A flexible software toolbox for solving partial differential equations , 1997 .

[74]  Chao-Yang Wang,et al.  A multiphase mixture model for multiphase, multicomponent transport in capillary porous media—I. Model development , 1996 .

[75]  Markku J. Lampinen,et al.  Analysis of Free Energy and Entropy Changes for Half‐Cell Reactions , 1993 .

[76]  T. Fuller,et al.  Water and Thermal Management in Solid‐Polymer‐Electrolyte Fuel Cells , 1993 .

[77]  A. Parthasarathy,et al.  Pressure Dependence of the Oxygen Reduction Reaction at the Platinum Microelectrode/Nafion Interface: Electrode Kinetics and Mass Transport , 1992 .

[78]  A. Parthasarathy,et al.  Temperature Dependence of the Electrode Kinetics of Oxygen Reduction at the Platinum/Nafion® Interface—A Microelectrode Investigation , 1992 .

[79]  Mark W. Verbrugge,et al.  A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell , 1992 .

[80]  Charles R. Martin,et al.  The Platinum Microelectrode/Nafion Interface: An Electrochemical Impedance Spectroscopic Analysis of Oxygen Reduction Kinetics and Nafion Characteristics , 1992 .

[81]  M. Verbrugge,et al.  Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte , 1991 .

[82]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[83]  C. R. Martin,et al.  Investigations of the O sub 2 reduction reaction at the platinum/Nafion interface using a solid-state electrochemical cell. Technical report , 1991 .

[84]  M. Yavuz Corapcioglu,et al.  Advances in transport phenomena in porous media , 1987 .

[85]  A. Appleby.  Oxygen Reduction on Oxide‐Free Platinum in 85%Orthophosphoric Acid: Temperature and Impurity Dependence , 1970 .

[86]  J. Giddings,et al.  NEW METHOD FOR PREDICTION OF BINARY GAS-PHASE DIFFUSION COEFFICIENTS , 1966 .

[87]  S. Brummer.  The Use of Large Anodic Galvanostatic Transients to Evaluate the Maximum Adsorption on Platinum from Formic Acid Solutions , 1965 .

[88]  Adrian E. Scheidegger,et al.  The physics of flow through porous media , 1957 .