Multi-physical continuum models of thermochemical heat storage and transformation in porous media and powder beds—A review
暂无分享,去创建一个
Olaf Kolditz | Christoph Lehmann | Thomas Nagel | Roger Gläser | Steffen Beckert | O. Kolditz | T. Nagel | R. Gläser | C. Lehmann | S. Beckert
[1] Christopher Yu Hang Chao,et al. Performance predictions for a new zeolite 13X/CaCl2 composite adsorbent for adsorption cooling systems , 2012 .
[2] D. Close,et al. Use of adsorbent beds for energy storage in drying of heating systems , 1977 .
[3] K. Sumathy,et al. Review of mathematical investigation on the closed adsorption heat pump and cooling systems , 2002 .
[4] A. Jemni,et al. Experimental and theoretical study of ametal–hydrogen reactor , 1999 .
[5] Bernard Spinner,et al. Models of heat and mass transfers in solid—gas reactors used as chemical heat pumps , 1990 .
[6] Kai Choong Leong,et al. Numerical modeling of combined heat and mass transfer in the adsorbent bed of a zeolite/water cooling system , 2004 .
[7] Jalel Labidi,et al. Effect of mass transfer kinetics on the performance of adsorptive heat pump systems , 2002 .
[8] Tarik Kousksou,et al. Modeling of a thermal adsorber powered by solar energy for refrigeration applications , 2014 .
[9] E. A. Foumeny,et al. Design of packed bed reactors : guides to catalyst shape, size, and loading selection , 2001 .
[10] J. Böhm,et al. Adsorption Measurements of Nitrogen and Methane in Hydrogen-Rich Mixtures at High Pressures , 2011 .
[11] Nathalie Mazet,et al. Mass‐transfer parameters in gas‐solid reactive media to identify permeability of IMPEX , 1999 .
[12] Lingai Luo,et al. A review on long-term sorption solar energy storage , 2009 .
[13] Jalel Labidi,et al. Modeling of adsorption heat pumps with heat regeneration , 2004 .
[14] Kamil Kaygusuz,et al. The Viability of Thermal Energy Storage , 1999 .
[15] Arun S. Mujumdar,et al. Effects of heat exchange condition on hot air production by a chemical heat pump dryer using CaO/H2O/Ca(OH)2 reaction , 2002 .
[16] Philippe Papillon,et al. Thermodynamic analysis and experimental study of solid/gas reactor operating in open mode , 2014 .
[17] L. W. Wang,et al. Sorption thermal storage for solar energy , 2013 .
[18] William G. Gray,et al. Macroscale continuum mechanics for multiphase porous-media flow including phases, interfaces, common lines and common points , 1998 .
[19] J. San,et al. Comparison among three adsorption pairs for using as the working substances in a multi-bed adsorption heat pump. , 2008 .
[20] A. Steinfeld,et al. CO2 capture from air via CaO-carbonation using a solar-driven fluidized bed reactor—Effect of temperature and water vapor concentration , 2009 .
[21] Michel Quintard,et al. A local thermal non-equilibrium model for two-phase flows with phase-change in porous media , 2004 .
[22] T. Trucano,et al. Verification, Validation, and Predictive Capability in Computational Engineering and Physics , 2004 .
[23] K Castets,et al. Analysis and optimization of the cyclic working mode of thermochemical transformers , 2000 .
[24] Kun-Hong Lee,et al. Transformation analysis of thermochemical reactor based on thermophysical properties of graphite-MnCl2 complex , 2000 .
[25] Ruzhu Wang,et al. Theoretical and experimental study on characteristics of a novel silica gel-water chiller under the conditions of variable heat source temperature , 2007 .
[26] D. Andrew S. Rees,et al. Numerical investigation of coupled heat and mass transfer inside the adsorbent bed of an adsorption cooling unit , 2012 .
[27] A. Freni,et al. Zeolite synthesised on copper foam for adsorption chillers: A mathematical model , 2009 .
[28] Olaf Kolditz,et al. Parallel finite element modelling of multi-physical processes in thermochemical energy storage devices , 2017 .
[29] I. Aksay,et al. Simultaneous momentum, heat and mass transfer with chemical reaction in a disordered porous medium: application to binder removal from a ceramic green body , 1990 .
[30] Mohammad Omar Abdullah,et al. Parametric study and simulation of a heat-driven adsorber for air conditioning system employing activated carbon–methanol working pair , 2014 .
[31] A. Deydier,et al. A review on high temperature thermochemical heat energy storage , 2014 .
[32] N Medini,et al. Etude d'une machine solaire autonome à fabriquer de la glace , 1991 .
[33] K. Sumathy,et al. Heat and mass transfer in the adsorbent of a solar adsorption cooling system with glass tube insulation , 2003 .
[34] C. W. Chan,et al. A review of chemical heat pumps, thermodynamic cycles and thermal energy storage technologies for low grade heat utilisation , 2013 .
[35] F. Laurencelle,et al. Simulation of heat transfer in a metal hydride reactor with aluminium foam , 2007 .
[36] Camilo A. Arancibia-Bulnes,et al. Transient heat transfer simulation of a 1 kWth moving front solar thermochemical reactor for thermal dissociation of compressed ZnO , 2015 .
[37] P. Dantzer,et al. Metal-Hydride technology: A critical review , 1997 .
[38] Bernd Markert,et al. Weak or strong : on coupled problems in continuum mechanics , 2010 .
[39] Hyunho Kim,et al. Thermal battery for portable climate control , 2015 .
[40] Hans Müller-Steinhagen,et al. A thermodynamic and kinetic study of the de- and rehydration of Ca(OH)2 at high H2O partial pressures for thermo-chemical heat storage , 2012 .
[41] Muhammad R. Hajj,et al. Thermal energy storage in porous materials with adsorption and desorption of moisture , 2014 .
[42] Ruzhu Wang,et al. Theoretical and experimental investigation of a closed sorption thermal storage prototype using LiCl/water , 2015 .
[43] A. F. Mills,et al. Heat and mass transfer in metal hydride beds for heat pump applications , 1990 .
[44] Sensitivity Analysis of the Energy Density in a Thermo Chemical Heat Storage Device , 2014 .
[45] Arun S. Mujumdar,et al. Continuous operation of a chemical heat pump , 2007 .
[46] Yuri I. Aristov,et al. Challenging offers of material science for adsorption heat transformation: A review , 2013 .
[47] Pierre Neveu,et al. A review of chemical heat pump technology and applications , 2001 .
[48] Osman Balci,et al. Verification, Validation And Accreditation Of Simulation Models , 1997, Winter Simulation Conference Proceedings,.
[49] Olaf Kolditz,et al. The influence of gas–solid reaction kinetics in models of thermochemical heat storage under monotonic and cyclic loading , 2014 .
[50] Hui Tong Chua,et al. Modeling of a two-bed silica gel-water adsorption chiller , 2004 .
[51] Gerhart Eigenberger,et al. Measurement and Modeling of Water Vapor Adsorption on Zeolite 4A—Equilibria and Kinetics , 2004 .
[52] S. Fujimoto,et al. CaO/Ca(OH)2 chemical heat pump system , 2002 .
[53] Wenqing Wang,et al. Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking: Closed-Form Solutions , 2014 .
[54] S. M. Hasnain. Review on sustainable thermal energy storage technologies, Part II: cool thermal storage , 1998 .
[55] Jung-Yang San,et al. Analysis of the performance of a multi-bed adsorption heat pump using a solid-side resistance model , 2006 .
[56] Hans Müller-Steinhagen,et al. De- and rehydration of Ca(OH) 2 in a reactor with direct heat transfer for thermo-chemical heat storage. Part B: Validation of model , 2013 .
[57] S. Whitaker. Simultaneous Heat, Mass, and Momentum Transfer in Porous Media: A Theory of Drying , 1977 .
[58] W.-S. Chang,et al. Experimental study of a solid adsorption cooling system using flat-tube heat exchangers as adsorption bed , 2007 .
[59] William L. Oberkampf,et al. Issues in Computational Fluid Dynamics Code Verification and Validation , 1997 .
[60] Bernard Spinner,et al. ANALYSIS AND EXPERIMENTAL STUDY OF THE TRANSFORMATION OF A NON-ISOTHERMAL SOLID/GAS REACTING MEDIUM , 1991 .
[61] P. Banks,et al. Coupled heat and mass transfer in regenerators—prediction using an analogy with heat transfer , 1972 .
[62] A. Bejan. Convection Heat Transfer , 1984 .
[63] K. Slimi,et al. NEW MODELING APPROACH FOR HEAT AND MASS TRANSFERS DURING SORPTION PHENOMENA IN A PLANE ADSORBER , 2010 .
[64] Christopher Yu Hang Chao,et al. Measurement of properties and performance prediction of the new MWCNT-embedded zeolite 13X/CaCl2 composite adsorbents , 2015 .
[65] Fusheng Yang,et al. Three-dimensional modeling and sensitivity analysis of multi-tubular metal hydride reactors , 2013 .
[66] M. Hajj,et al. Modeling of thermochemical energy storage by salt hydrates , 2010 .
[67] Olaf Kolditz,et al. Non-equilibrium thermo-chemical heat storage in porous media: Part 2 – A 1D computational model for a calcium hydroxide reaction system , 2013 .
[68] Weidong Wu,et al. Mathematical simulation and experimental study of a modified zeolite 13X–water adsorption refrigeration module , 2009 .
[69] Yury I. Aristov,et al. Novel Materials for Adsorptive Heat Pumping and Storage: Screening and Nanotailoring of Sorption Properties , 2007 .
[70] S. Ben Nasrallah,et al. Study of two-dimensional heat and mass transfer during desorption in a metal-hydrogen reactor , 1995 .
[71] K. Castets,et al. Optimization of the reactor configuration on the performance of the cyclic working mode of thermochemical transformers , 2001 .
[72] Nathalie Mazet,et al. Improving the performance of the reactor under unfavourable operating conditions of low pressure , 1998 .
[73] A. Freni,et al. A dynamic model of heat and mass transfer in a double-bed adsorption machine with internal heat recovery , 2006 .
[74] Bernard Spinner,et al. Modelling of gas-solid reaction—Coupling of heat and mass transfer with chemical reaction , 1996 .
[76] Kai Choong Leong,et al. The effect of operating conditions on the performance of zeolite/water adsorption cooling systems , 2005 .
[77] J. Böhm,et al. Dynamic bed measurements of CO adsorption on microporous adsorbents at high pressures for hydrogen purification processes , 2011 .
[78] Francis Meunier,et al. Adsorption heat powered heat pumps , 2013 .
[79] Stéphane Ginestet,et al. Modeling of a nonlinear thermochemical energy storage by adsorption on zeolites , 2014 .
[80] J. Jänchen,et al. Influence of Cycle Temperatures on the Thermochemical Heat Storage Densities in the Systems Water/Microporous and Water/Mesoporous Adsorbents , 2005 .
[81] A. Isselhorst. Heat and mass transfer in coupled hydride reaction beds , 1995 .
[82] Naef A.A. Qasem,et al. Improving ice productivity and performance for an activated carbon/methanol solar adsorption ice-maker , 2013 .
[83] Takao Kashiwagi,et al. Modeling the performance of two-bed, sillica gel-water adsorption chillers , 1999 .
[84] Hiroyuki Kage,et al. Efficiencies of CaO/H2O/Ca(OH)2 chemical heat pump for heat storing and heating/cooling , 2003 .
[85] Frédéric Kuznik,et al. Performance analysis of a thermochemical based heat storage as an addition to cogeneration systems , 2015 .
[86] Fusheng Yang,et al. Identifying heat and mass transfer characteristics of metal hydride reactor during adsorption: Improved formulation about parameter analysis , 2009 .
[87] Ian D. Wilson,et al. Encyclopedia of separation science , 2000 .
[88] Y. Kato,et al. Lithium bromide-mediated reaction performance enhancement of a chemical heat-storage material for magnesium oxide/water chemical heat pumps , 2014 .
[89] Yuri I. Aristov,et al. A new generation cooling device employing CaCl2-in-silica gel–water system , 2009 .
[90] Hamid Niazmand,et al. Effects of plate finned heat exchanger parameters on the adsorption chiller performance , 2013 .
[91] M. A. Hadj Ammar,et al. Simulation of tubular adsorber for adsorption refrigeration system powered by solar energy in sub-Sahara region of Algeria , 2015 .
[92] Yong Tae Kang,et al. Heat exchanger design effect on the system performance of silica gel adsorption refrigeration systems , 2000 .
[93] Nathalie Mazet,et al. Comparison of a general model with a simplified approach for the transformation of solid-gas media used in chemical heat transformers , 1997 .
[94] Carlos M. Silva,et al. Application of the novel ETS-10/water pair in cyclic adsorption heating processes: Measurement of equilibrium and kinetics properties and simulation studies , 2015 .
[95] Cooper H. Langford,et al. SOLAR ENERGY STORAGE USING CHEMICAL POTENTIAL CHANGES ASSOCIATED WITH DRYING OF ZEOLITES , 1979 .
[96] Jai-Young Lee,et al. Mathematical model for the dynamic P-C-T curves of the MmNi4.6Al0.2Fe0.2V0.03 alloy in a tubular reactor , 1996 .
[97] Olaf Kolditz,et al. Non-equilibrium thermochemical heat storage in porous media: Part 1 – Conceptual model , 2013 .
[98] Luigi Marletta,et al. A non-uniform temperature non-uniform pressure dynamic model of heat and mass transfer in compact adsorbent beds , 2002 .
[99] Weeratunge Malalasekera,et al. An introduction to computational fluid dynamics - the finite volume method , 2007 .
[100] P. Marty,et al. Experimental and numerical study of a magnesium hydride tank , 2010 .
[101] Naef A.A. Qasem,et al. Thermal analysis and modeling study of an activated carbon solar adsorption icemaker: Dhahran case study , 2015 .
[102] Fabio Polonara,et al. State of the art of thermal storage for demand-side management , 2012 .
[103] Harald Drück,et al. Development of a Thermo-Chemical Energy Storage for Solar Thermal Applications , 2011 .
[104] Peng Hu,et al. Analysis for composite zeolite/foam aluminum-water mass recovery adsorption refrigeration system driven by engine exhaust heat , 2009 .
[105] R. Weber,et al. Development of a combined hot water and sorption store for solar thermal systems , 2014 .
[106] Giovanni Restuccia,et al. A zeolite-coated bed for air conditioning adsorption systems: parametric study of heat and mass transfer by dynamic simulation , 2002 .
[107] Ahrae Jo,et al. Three-dimensional modeling and simulation of hydrogen desorption in metal hydride hydrogen storage vessels , 2015 .
[108] Vincent Goetz,et al. Definition, test and simulation of a thermochemical storage process adapted to solar thermal systems , 2006 .
[109] W. Ehlers. Foundations of multiphasic and porous materials , 2002 .
[110] Jinyue Yan,et al. Energy storage systems for a low carbon future – in need of an integrated approach , 2015 .
[111] Yaodong Wang,et al. Modelling of a chemisorption refrigeration and power cogeneration system , 2014 .
[112] F. Meunier,et al. Numerical study on coupled heat and mass transfers in an absorber with external fluid heating , 1995 .
[113] Tomas Nunez,et al. Transient modeling of an adsorber using finned-tube heat exchanger , 2010 .
[114] Frédéric Kuznik,et al. Thermal decomposition kinetic of salt hydrates for heat storage systems , 2015 .
[115] J. Castaing-Lasvignottes,et al. Development of a numerical sizing tool applied to a solid-gas thermochemical transformer—II. Influence of external couplings on the dynamic behaviour of a solid-gas thermochemical transformer , 1997 .
[116] Anton Ianakiev,et al. Modelling and simulation of adsorption process in a fluidised bed thermochemical energy reactor , 2006 .
[117] Vincent Goetz,et al. A model for reversible solid-gas reactions submitted to temperature and pressure constraints: simulation of the rate of reaction in solid-gas reactor used as chemical heat pump , 1992 .
[118] Z. Bao. Performance investigation and optimization of metal hydride reactors for high temperature thermochemical heat storage , 2015 .
[119] Fusheng Yang,et al. Optimal design of metal hydride reactors based on CFD–Taguchi combined method , 2013 .
[120] Fusheng Yang,et al. Identifying heat and mass transfer characteristics of metal hydride reactor during adsorption—Parameter analysis and numerical study , 2007 .
[121] Shengwei Wang,et al. Numerical analysis and evaluation of an open-type thermal storage system using composite sorbents , 2009 .
[122] Olaf Kolditz,et al. Results from an International Simulation Study on Coupled Thermal, Hydrological, and Mechanical Processes near Geological Nuclear Waste Repositories , 2008 .
[123] Zihang Zhang,et al. Design of the metal hydride reactors – A review on the key technical issues , 2010 .
[124] Mohammad Omar Abdullah,et al. Experimental Study of an Automobile Exhaust Heat-Driven Adsorption Air-Conditioning Laboratory Prototype by Using Palm Activated Carbon-Methanol , 2010 .
[125] Marc A. Rosen,et al. Assessment of a closed thermochemical energy storage using energy and exergy methods , 2012 .
[126] D. J. Close,et al. The behaviour of adsorbent energy storage beds , 1976 .
[127] Ali H. Abedin,et al. A Critical Review of Thermochemical Energy Storage Systems , 2011 .
[128] Robert E. Critoph,et al. Evaluation of alternative refrigerant—adsorbent pairs for refrigeration cycles , 1996 .
[129] Lingai Luo,et al. Experimental and numerical investigations of a zeolite 13X/water reactor for solar heat storage in buildings , 2016 .
[130] R. Wang,et al. Study on MnCl2/CaCl2–NH3 two-stage solid sorption freezing cycle for refrigerated trucks at low engine load in summer , 2016 .
[131] L. Bonaccorsi,et al. Efficiency improvement of heat storage materials for MgO/H2O/Mg(OH)2 chemical heat pumps , 2016 .
[132] F. Askri,et al. Study of two-dimensional and dynamic heat and mass transfer in a metal–hydrogen reactor , 2003 .
[133] Fusheng Yang,et al. An extensive parametric analysis on the performance of a single-stage metal hydride heat transformer , 2012 .
[134] Michel Pons,et al. Numerical investigation of adsorptive heat pump systems with thermal wave heat regeneration under uniform-pressure conditions , 1997 .
[135] Hans Müller-Steinhagen,et al. New highly efficient regeneration process for thermochemical energy storage , 2013 .
[136] D. Close,et al. Coupled equilibrium heat and single adsorbate transfer in fluid flow through a porous medium — II Predictions for a silica-gel air-drier using characteristic charts , 1972 .
[137] H. Talebian,et al. Effects of particle diameter on performance improvement of adsorption systems , 2013 .
[138] Hoda Talebian,et al. Bed geometrical specifications effects on the performance of silica/water adsorption chillers , 2012 .
[139] K. D. Kafui. Transient Heat and Moisture Transfer in Thin Silica Gel Beds , 1994 .
[140] Dajie Sun,et al. NUMERICAL SOLUTION OF THE TWO-DIMENSIONAL NON-STEADY HEAT AND MASS TRANSFER PROBLEM IN METAL HYDRIDE BEDS , 1990 .
[141] K. Nagano,et al. Numerical simulation of an open sorption thermal energy storage system using composite sorbents built into a honeycomb structure , 2014 .
[142] Sun Dawen,et al. Study of the heat and mass transfer characteristics of metal hydride beds: A two-dimensional model , 1989 .
[143] Y. Uludag,et al. Modeling and computational simulation of adsorption based chemical heat pumps , 2013 .
[144] Hyunho Kim,et al. DESIGN AND OPTIMIZATION OF HIGH PERFORMANCE ADSORPTION-BASED THERMAL BATTERY , 2013 .
[145] Shengwei Wang,et al. Experimental investigation of contact resistance in adsorber of solar adsorption refrigeration , 2002 .
[146] M. Kaviany,et al. Nonequilibrium in the transport of heat and reactants in combustion in porous media , 2001 .
[147] Bruno G. Pollet,et al. Metal hydride hydrogen compressors: A review , 2014 .
[148] Jean Castaing-Lasvignottes,et al. Development of a numerical sizing tool for a solid-gas thermochemical transformer—I. Impact of the microscopic process on the dynamic behaviour of a solid-gas reactor , 1997 .
[149] P. J. Banks,et al. Coupled quilibrium heat and single adsorbate transfer in fluid flow through a porous medium—I Characteristic potential and specific capacity ratios , 1972 .
[150] Ruzhu Wang,et al. Locomotive driver cabin adsorption air-conditioner , 2003 .
[151] Dajie Sun,et al. Major factors affecting the reaction rate in metal hydride beds , 1991 .
[152] Kiyoshi Saito,et al. Performance analysis of four-partition desiccant wheel and hybrid dehumidification air-conditioning system. , 2010 .
[153] R. Tamme,et al. High Temperature Thermochemical Heat Storage for Concentrated Solar Power Using Gas–Solid Reactions , 2011 .
[154] Luisa F. Cabeza,et al. Thermochemical energy storage and conversion: A-state-of-the-art review of the experimental research under practical conditions , 2012 .
[155] A. Mhimid,et al. Theoretical study of heat and mass transfer in a zeolite bed during water desorption: validity of local thermal equilibrium assumption , 1998 .
[156] Jochen Jänchen,et al. Performance of an open thermal adsorption storage system with Linde type A zeolites: Beads versus honeycombs , 2015 .
[157] Hamid Niazmand,et al. Numerical simulation of heat and mass transfer in adsorbent beds with annular fins , 2012 .
[158] S. M. Hasnain. Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques , 1998 .
[159] Benoît Y. Michel,et al. Comparison of closed and open thermochemical processes, for long-term thermal energy storage applications , 2014 .
[160] Yong Tae Kang,et al. A novel approach to determine optimum switching frequency of a conventional adsorption chiller , 2003 .
[161] Yuri I. Aristov,et al. A new methodology of studying the dynamics of water sorption/desorption under real operating conditions of adsorption heat pumps : Modelling of coupled heat and mass transfer in a single adsorbent grain , 2008 .
[162] S. Mauran,et al. Thermochemical process for seasonal storage of solar energy: Characterization and modeling of a high density reactive bed , 2012 .
[163] S. Narayanan,et al. Optimization of adsorption processes for climate control and thermal energy storage , 2014 .
[164] A. Hauer,et al. Evaluation of adsorbent materials for heat pump and thermal energy storage applications in open systems , 2007 .
[165] Hideyuki Aoki,et al. Numerical analysis of heat and mass transfer characteristics in the metal hydride bed , 2000 .
[166] H. Müller-Steinhagen,et al. De- and rehydration of Ca(OH)2 in a reactor with direct heat transfer for thermo-chemical heat storage. Part A: Experimental results , 2013 .
[167] S. B. Nasrallah,et al. Study of Heat and Mass Transfer in a Metal — Hydrogen Reactor* , 1994 .
[168] S. Fujimoto,et al. Dynamic simulation of CaO/Ca(OH)2 chemical heat pump systems , 2002 .
[169] R. Viskanta,et al. Numerical Predictions of Combustion and Heat Transfer in a Packed Bed with Embedded Coolant Tubes , 1994 .
[170] Christian Sattler,et al. Thermal model for the optimization of a solar rotary kiln to be used as high temperature thermochemical reactor , 2013 .
[171] Nathalie Mazet,et al. Modeling of heat and mass transfer coupling with gas¿solid reaction in a sorption heat pump cooled by a two-phase closed thermosyphon , 2005 .
[172] Hans Müller-Steinhagen,et al. Experimental and numerical investigations on the water vapor adsorption isotherms and kinetics of binderless zeolite 13X , 2014 .
[173] V. Goetz,et al. Thermal Energy Storage System by Solid Absorption for Electric Automobile Heating and Air-Conditioning , 1995 .
[174] Marc A. Rosen,et al. Closed and open thermochemical energy storage: Energy- and exergy-based comparisons , 2012 .
[175] Xiao Ni Qi,et al. A Model of Adsorption Icemaker on a Fishing Boat , 2012 .
[176] Henrik Bjurström,et al. The metal hydride heat pump: Dynamics of hydrogen transfer , 1989 .
[177] Wayne E. Wentworth,et al. Simple thermal decomposition reactions for storage of solar thermal energy , 1975 .
[178] F. Meunier,et al. AN IMPROVED FINITE DIFFERENCE METHOD FOR FIXED-BED MULTICOMPONENT SORPTION , 1991 .
[179] N Oreskes,et al. Verification, Validation, and Confirmation of Numerical Models in the Earth Sciences , 1994, Science.
[180] A. Freni,et al. Simulation of water sorption dynamics in adsorption chillers: One, two and four layers of loose silica grains , 2011 .
[181] Manfred Groll,et al. Heat and mass transfer in metal hydride reaction beds: Experimental and theoretical results , 1987 .
[182] Roy B. Holmberg,et al. Combined Heat and Mass Transfer in Regenerators with Hygroscopic Materials , 1979 .
[183] J. Frauhammer,et al. A fully adaptive algorithm for parabolic partial differential equations in one space dimension , 1996 .
[184] O. Kolditz,et al. Assessment of adsorbate density models for numerical simulations of zeolite-based heat storage applications , 2017 .
[185] Jun Fukai,et al. Performance of a Novel Steam Generation System Using a Water-zeolite Pair for Effective Use of Waste Heat From the Iron and Steel Making Process , 2015 .
[186] Mohammad Omar Abdullah,et al. Automobile adsorption air-conditioning system using oil palm biomass-based activated carbon: A review , 2011 .
[187] Henner Kerskes,et al. PROCESS AND REACTOR DESIGN FOR THERMO-CHEMICAL ENERGY STORES , 2011 .
[188] Bernard Spinner,et al. A new analytical model for solid-gas thermochemical reactors based on thermophysical properties of the reactive medium , 1997 .
[189] Victor Rudolph,et al. Investigation on the influences of heat transfer enhancement measures in a thermally driven metal hydride heat pump , 2010 .