Investigation of Advanced Robotized Polymer Sheet Incremental Forming Process

The aim of this work is to evaluate the possibility of inexpensively producing small-batch polymer sheet components using robotized single point incremental forming (SPIF) without backing plate support. An innovative method of thermal and ultrasound assisted deformation of a polymer sheet is proposed using a tool with a sphere mounted in a ring-shaped magnetic holder, the friction of which with the tool holder is reduced by ultrasound, and the heating is performed by a laser. The heated tool moving on the sheet surface locally increases the plasticity of the polyvinyl chloride (PVC) polymer in the contact zone with less deforming force does not reducing the stiffness of the polymer around the tool contact area and eliminating the need for a backing plate. The free 3D rotating ball also changes the slip of the tool on the surface of the polymer sheet by the rolling, thereby improving the surface quality of the product. The finite element method (FEM) allowed the virtual evaluation of the deformation parameters of the SPIF. Significant process parameters were found, and the behavior of the heated polymer sheet was determined.

[1]  Maria Luisa Garcia-Romeu,et al.  Manufacturing of Polymeric Biocompatible Cranial Geometry by Single Point Incremental Forming , 2015 .

[2]  L. Filice,et al.  Incremental Sheet Forming of a Composite Made of Thermoplastic Matrix and Glass-Fiber Reinforcement , 2017 .

[3]  V. Kräusel,et al.  Hot single-point incremental forming of glass-fiber-reinforced polymer (PA6GF47) supported by hot air , 2019, Journal of Manufacturing Processes.

[4]  Xiao Bo Zhang,et al.  Study on Process Parameters on Single Point Incremental Forming of PVC , 2016 .

[5]  Giovanni Lucchetta,et al.  Preliminary Studies on Single Point Incremental Forming for Thermoplastic Materials , 2008 .

[6]  Rajiv Malhotra,et al.  Effects of incremental depth and tool rotation on failure modes and microstructural properties in Single Point Incremental Forming of polymers , 2015 .

[7]  D. Carou,et al.  Force Prediction for Incremental Forming of Polymer Sheets , 2018, Materials.

[8]  Paulo A.F. Martins,et al.  Single point incremental forming of polymers , 2009 .

[9]  R. Malhotra,et al.  Formability and failure modes in Single Point Incremental Forming of Metal-Polymer Laminates , 2018 .

[10]  M. Bambach,et al.  Revealing the Dominant Forming Mechanism of Single Point Incremental Forming (SPIF) by Splitting Plastic Energy Dissipation , 2017 .

[11]  A. Popov,et al.  Incremental sheet forming of thermoplastics: a review , 2020, The International Journal of Advanced Manufacturing Technology.

[12]  Joerg Wallaschek,et al.  Reduction of friction using piezoelectrically excited ultrasonic vibrations , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[13]  Shubhamkar Kulkarni.  Heat Assisted Single Point Forming of Polymer Sheets , 2016 .

[14]  Paulo A.F. Martins,et al.  Single point incremental forming of PVC , 2009 .

[15]  M. L. Garcia-Romeu,et al.  Single-Point Incremental Forming of Two Biocompatible Polymers: An Insight into Their Thermal and Structural Properties , 2018, Polymers.

[16]  M. L. Garcia-Romeu,et al.  Process Parameter Effects on Biocompatible Thermoplastic Sheets Produced by Incremental Forming , 2018, Materials.

[17]  L. E. Elizalde,et al.  Mechanical and structural studies on single point incremental forming of polypropylene-MWCNTs composite sheets , 2017 .