Numerical Analysis of the Surface Aerodynamic Noise of the CRH3 High Speed Train

For high speed trains running at 300km/h or more, the aerodynamic noise becomes the primary noise source. A good knowledge of the location, spectral characteristics and propagation behavior of the noise source and the corresponding methods to reduce the effect of the aerodynamic noise are of crucial necessity during the design process of the high speed train. Based on the Lighthill Analogy, the pressure fluctuation of air at the surface of the train is acquired by simulating the flow field of a CRH3 high speed train running at 200 km/h, 300 km/h, 400 km/h and 500km/h by means of large eddy simulation method. By Fourier transformation, the distribution and the spectral characteristics of the surface acoustic dipole sources are obtained. The analysis of the results shows that the aerodynamic noise of the high speed train is a broadband noise with a strong radiation power band from 50Hz to 1000Hz. The dipole acoustic power calculated by statistically averaged on train surface is found to be proportional to the sixth power of running speed of the high speed train. The first and second bogie, the inter-car gap, the air deflector of the power train and the train nose of the last wagon are the main noise sources that contain high radiation energy.