Daylighting and solar shading performances of an innovative automated reflective louvre system

Abstract Traditional windows, as the major source of daylight, have a common problem which is uneven distribution of daylight in the room. Several innovative daylighting systems such as light shelves, fixed and movable reflective louvres, reflective sills, prismatic glazing, light pipes, etc., have been developed to address this problem. This paper reports on a research programme that investigates retrofitted solutions to uneven distribution of daylight in deep-plan office buildings. The work presented here follows initial investigations into the design and applicability of an automated retrofitted panel thermal shutters which can also act as a sunshade and daylighting system. The system has a patented function which allows each shutter/louvre to be controlled and placed separately from other louvres. This study evaluates the effectiveness of the system when acting as a sunshade, light shelf, reflective louvre, and reflective sill under clear, overcast, and sunny sky conditions. According to the results, the system significantly improved daylight distribution and reduced the need for artificial lighting by 60%.

[1]  Cheuk Ming Mak,et al.  New static lightshelf system design of clerestory windows for Hong Kong , 2014 .

[2]  Prashant Kumar Soori,et al.  Lighting control strategy for energy efficient office lighting system design , 2013 .

[3]  Stephen Selkowitz,et al.  Thermal and daylighting performance of an automated venetian blind and lighting system in a full-scale private office , 1998 .

[4]  I. G. Capeluto,et al.  Evaluating visual comfort and performance of three natural lighting systems for deep office buildings in highly luminous climates , 2006 .

[5]  Svetlana Olbina,et al.  Daylighting and thermal performance of automated split-controlled blinds , 2012 .

[6]  Derek Phillips,et al.  Lighting Modern Buildings , 2000 .

[7]  Robert Clear,et al.  Office Worker Response to an Automated Venetian Blind and Electric Lighting System: A Pilot Study , 1998 .

[8]  Alfonso Soler,et al.  Indoor daylight climate–influence of light shelf and model reflectance on light shelf performance in Madrid for hours with unit sunshine fraction , 2002 .

[9]  Mohamed Boubekri Daylighting, Architecture and Health: Building Design Strategies , 2008 .

[10]  An-Seop Choi,et al.  The characteristics of photosensors and electronic dimming ballasts in daylight responsive dimming systems , 2005 .

[11]  Andreas K. Athienitis,et al.  Manually-operated window shade patterns in office buildings: A critical review , 2013 .

[12]  Kp Mansfield British Standard BS 8206-2 (2008) Lighting for Buildings - Part 2: Code of Practice for Daylighting , 2008 .

[13]  S. Szokolay,et al.  Introduction to Architectural Science: The Basis of Sustainable Design , 2004 .

[14]  Arman Hashemi,et al.  Technical issues that affect the use of retrofit panel thermal shutters in commercial buildings , 2014 .

[15]  Leyla Sanati,et al.  The effect of window shading design on occupant use of blinds and electric lighting , 2013 .

[16]  Jeong Tai Kim,et al.  Effects of occupancy and lighting use patterns on lighting energy consumption , 2012 .

[17]  Alfonso Soler,et al.  Light shelf performance in Madrid, Spain , 1997 .

[18]  Myoung Souk Yeo,et al.  Automated blind control to maximize the benefits of daylight in buildings , 2010 .