An Electrochemical NO2 Sensor Based on Ionic Liquid: Influence of the Morphology of the Polymer Electrolyte on Sensor Sensitivity

A systematic study was carried out to investigate the effect of ionic liquid in solid polymer electrolyte (SPE) and its layer morphology on the characteristics of an electrochemical amperometric nitrogen dioxide sensor. Five different ionic liquids were immobilized into a solid polymer electrolyte and key sensor parameters (sensitivity, response/recovery times, hysteresis and limit of detection) were characterized. The study revealed that the sensor based on 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][N(Tf)2]) showed the best sensitivity, fast response/recovery times, and low sensor response hysteresis. The working electrode, deposited from water-based carbon nanotube ink, was prepared by aerosol-jet printing technology. It was observed that the thermal treatment and crystallinity of poly(vinylidene fluoride) (PVDF) in the solid polymer electrolyte influenced the sensitivity. Picture analysis of the morphology of the SPE layer based on [EMIM][N(Tf)2] ionic liquid treated under different conditions suggests that the sensor sensitivity strongly depends on the fractal dimension of PVDF spherical objects in SPE. Their deformation, e.g., due to crowding, leads to a decrease in sensor sensitivity.

[1]  R. Reis,et al.  Green processing of porous chitin structures for biomedical applications combining ionic liquids and supercritical fluid technology. , 2011, Acta biomaterialia.

[2]  Oldrich Zmeskal,et al.  FRACTAL ANALYSIS OF THE IMAGES USING WAVELET TRANSFORMATION , 2006 .

[3]  A. Ivaska,et al.  Applications of ionic liquids in electrochemical sensors. , 2008, Analytica chimica acta.

[4]  A. Bond,et al.  Voltammetry in room temperature ionic liquids: comparisons and contrasts with conventional electrochemical solvents. , 2010, Chemistry, an Asian journal.

[5]  J. Reiter,et al.  A planar, solid-state amperometric sensor for nitrogen dioxide, employing an ionic liquid electrolyte contained in a polymeric matrix , 2012 .

[6]  Joseph R. Stetter,et al.  Printed Amperometric Gas Sensors , 2013 .

[7]  Richard G Compton,et al.  Toward membrane-free amperometric gas sensors: a microelectrode array approach. , 2010, Analytical chemistry.

[8]  Mercedes Crego-Calama,et al.  Electrochemical sensing of ethylene employing a thin ionic-liquid layer. , 2011, Analytical chemistry.

[9]  Radek Soukup,et al.  Effect of the geometry of a working electrode on the behavior of a planar amperometric NO2 sensor based on solid polymer electrolyte , 2013 .

[10]  Inmaculada Ortiz,et al.  Progress in the use of ionic liquids as electrolyte membranes in fuel cells , 2014 .

[11]  大野 弘幸,et al.  Electrochemical aspects of ionic liquids , 2005 .

[12]  D. Silvester.  Recent advances in the use of ionic liquids for electrochemical sensing. , 2011, The Analyst.

[13]  Karel Štulík,et al.  An amperometric solid-state NO2 sensor with a solid polymer electrolyte and a reticulated vitreous carbon indicator electrode , 2000 .

[14]  Jinwei Zhu,et al.  Bienzymatic glucose biosensor based on three dimensional macroporous ionic liquid doped sol-gel organic-inorganic composite , 2012 .

[15]  J. Reiter,et al.  Ionic liquid―polymer electrolyte for amperometric solid-state NO2 sensor , 2011 .

[16]  Ales Hamacek,et al.  Towards a fully printed electrochemical NO2 sensor on a flexible substrate using ionic liquid based polymer electrolyte , 2015 .

[17]  M. Riekkola,et al.  Ionic liquid-modified materials for solid-phase extraction and separation: a review. , 2012, Analytica chimica acta.

[18]  Craig E. Banks,et al.  Electrochemical ammonia gas sensing in nonaqueous systems: A comparison of propylene carbonate with room temperature ionic liquids , 2007 .

[19]  Oldrich Zmeskal,et al.  Entropy of fractal systems , 2013, Comput. Math. Appl..

[20]  Michael Freemantle,et al.  An Introduction to Ionic Liquids , 2010 .

[21]  R. Gregorio,et al.  Effect of crystallization rate on the formation of the polymorphs of solution cast poly(vinylidene fluoride) , 2008 .

[22]  Statistics of Fractal Systems , 2014 .

[23]  Mohammad Reza Ganjali,et al.  Application of Room Temperature Ionic Liquids in Electrochemical Sensors and Biosensors , 2011 .

[24]  N. Dossi,et al.  An oxygen amperometric gas sensor based on its electrocatalytic reduction in room temperature ionic liquids , 2012 .

[25]  Iskander S. Akhatov,et al.  A Review on Aerosol-Based Direct-Write and Its Applications for Microelectronics , 2012 .

[26]  Bruno Scrosati,et al.  Ionic-liquid materials for the electrochemical challenges of the future. , 2009, Nature materials.

[27]  Richard G Compton,et al.  Use of room temperature ionic liquids in gas sensor design. , 2004, Analytical chemistry.

[28]  A. Lewandowski,et al.  Ionic liquids as electrolytes , 2006 .

[29]  J. Larsen,et al.  Preparation of CuGaSe2 absorber layers for thin film solar cells by annealing of efficiently electrodeposited Cu-Ga precursor layers from ionic liquids , 2011 .

[30]  R. Compton,et al.  (Invited) Amperometric Gas Detection Using Room Temperature Ionic Liquid Solvents , 2010 .

[31]  Joseph R. Stetter,et al.  Electrochemical NO2 gas sensors: Model and mechanism for the electroreduction of NO2 , 1990 .