The Study of the Directional Sensitivity of Fiber Bragg Gratings for Acoustic Emission Measurements

Structural health monitoring (SHM) of engineering structures plays a crucial role in ensuring their safety and integrity. Acoustic emissions (AE) can be one of the several ways to monitor the structural health. Fiber Bragg grating (FBG)-based AE measurement technique is emerging as a solution to assess cracks in structures remotely and has advantages of being less bulky and having low noise, high bandwidth and ease of implementation. This paper presents a study on the impact of AE signals on FBGs attached to a substrate, focusing on the directional sensitivity using different configurations. For ease of installation, the FBG sensors are metallically packaged similar to lead zirconium titanate (PZT) sensors in which they can withstand temperatures of up to 250 °C. The directional AE sensitivity of the packaged FBG sensor device is studied and compared with that of a surface attached FBG. Experimentally, the AE signals are generated by a metal ball drop impact on aluminum plate and are measured using an FBG AE interrogation system. A numerical simulation of the design was carried out using ANSYS explicit dynamics and the AE wave propagation in structure was analyzed and experimentally verified.

[1]  Kyriacos Kalli,et al.  Fiber Bragg Gratings: Fundamentals and Applications in Telecommunications and Sensing , 2000 .

[2]  Peter Volgyesi,et al.  Structural health monitoring of bridges with piezoelectric AE sensors , 2015 .

[3]  Y. Semenova,et al.  Fabrication and Characterisation of a Magnetized Metal-encapsulated FBG sensor for Structural Health Monitoring , 2019 .

[4]  Balaji Srinivasan,et al.  Investigation of the Directional Response of Fibre Bragg Grating-Based Acoustic Emission Sensor , 2012 .

[5]  Eric Udd,et al.  Acoustic emission detection using fiber Bragg gratings , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[6]  Michael R Wisnom,et al.  Quantitative structural health monitoring using acoustic emission , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  Maurizio Bocca,et al.  A Reconfigurable Wireless Sensor Network for Structural Health Monitoring , 2009 .

[8]  Yifan Zhang,et al.  Application of FBG sensors for geotechnical health monitoring, a review of sensor design, implementation methods and packaging techniques , 2016 .

[9]  Chuang Zhang,et al.  Performance evaluation of the Fiber Bragg Grating (FBG) sensing device and comparison with piezoelectric sensors for AE detection , 2017 .

[10]  Y. Semenova,et al.  Fabrication and Characterization of a Magnetized Metal-Encapsulated FBG Sensor for Structural Health Monitoring , 2018, IEEE Sensors Journal.

[11]  Jayantha Ananda Epaarachchi,et al.  Detecting delamination in a composite structure using an embedded FBG-AE hybrid system , 2012 .

[12]  B. Culshaw,et al.  Acousto-ultrasonic sensing using fiber Bragg gratings , 2003 .

[13]  S. Krishnaswamy,et al.  Response of a fiber Bragg grating ultrasonic sensor , 2003 .

[14]  Jiangtao Xi,et al.  Ballast Breakage Analysis Using FBG Acoustic Emission Measurement System , 2017, Geotechnical and Geological Engineering.

[15]  Hiroshi Tsuda,et al.  Ultrasound and damage detection in CFRP using fiber Bragg grating sensors , 2006 .

[17]  Kazuro Kageyama,et al.  Acoustic emission monitoring of a reinforced concrete structure by applying new fiber-optic sensors , 2005 .

[18]  Quanbao Wang,et al.  Review on composite structural health monitoring based on fiber Bragg grating sensing principle , 2013 .