Area monitoring using the ERT method with multisensor electrodes

The article presents a non-destructive method using multisensor electrodes to study cross-sections of interior objects such as landfills and flood embankments. Special sensors have been developed for deep measurements using electrical resistive tomography (ERT). It is an innovative approach to testing water and waste reservoirs, both due to the reconstruction model and the measurement method. The combination of tomographic techniques and original reconstruction algorithms allowed non-invasive and more accurate, spatial assessment of seepages and other damages of flood embankments. Streszczenie. W artykule przedstawiono metodę nieniszczącą z wykorzystaniem elektrod wielosensorowych do badania przekrojów wnętrza obiektów takich jak wysypiska i wały przeciwpowodziowe. Opracowano specjalne czujniki przeznaczone do pomiarów głębinowych za pomocą elektrycznej tomografii rezystancyjnej (ERT). Jest to innowacyjne podejście do testowania zbiorników wodnych i odpadowych, zarówno z uwagi na model rekonstrukcji, jak i metodę pomiaru. Połączenie technik tomograficznych i oryginalnych algorytmów rekonstrukcyjnych pozwoliło na nieinwazyjną i bardziej dokładną, przestrzenną ocenę infiltracji i innych uszkodzeń wałów przeciwpowodziowych. (Monitorowanie obszaru metodą ERT za pomocą elektrod wielosensorowych).

[1]  Robert Banasiak,et al.  Study on two-phase flow regime visualization and identification using 3D electrical capacitance tomography and fuzzy-logic classification , 2014 .

[2]  T. Rymarczyk,et al.  The Shape Reconstruction of Unknown Objects for Inverse Problems , 2012 .

[3]  Pavel Fiala,et al.  The Evaluation of Noise Spectroscopy Tests , 2016, Entropy.

[4]  Ewa Korzeniewska,et al.  Elements of elastic electronics created on textile substrate , 2017, 2017 MIXDES - 24th International Conference "Mixed Design of Integrated Circuits and Systems.

[5]  Dominik Sankowski,et al.  Description of the silo flow and bulk solid pulsation detection using ECT , 2010 .

[6]  Marcin Ziolkowski,et al.  Genetic algorithm coupled with Bézier curves applied to the magnetic field on a solenoid axis synthesis , 2016 .

[7]  Tomasz Rymarczyk,et al.  A Non-Destructive System Based on Electrical Tomography and Machine Learning to Analyze the Moisture of Buildings , 2018, Sensors.

[8]  Dariusz Mazurkiewicz,et al.  Intelligent Systems of Forecasting the Failure of Machinery Park and Supporting Fulfilment of Orders of Spare Parts , 2017 .

[9]  Tomasz Rymarczyk,et al.  Application of neural reconstruction of tomographic images in the problem of reliability of flood protection facilities , 2018, Eksploatacja i Niezawodnosc - Maintenance and Reliability.

[10]  M. Szkodo,et al.  Selection of material for X-ray tomography analysis and DEM simulations: comparison between granular materials of biological and non-biological origins , 2018, Granular Matter.

[11]  Robert Banasiak,et al.  Four-dimensional electrical capacitance tomography imaging using experimental data , 2009 .

[12]  Rymarczyk Tomasz,et al.  The use of multisensor electrodes in ERT for area monitoring , 2018, 2018 Applications of Electromagnetics in Modern Techniques and Medicine (PTZE).

[13]  Przemyslaw Lopato,et al.  Full wave numerical modelling of terahertz systems for nondestructive evaluation of dielectric structures , 2013 .

[14]  Tomasz Rymarczyk,et al.  Applying industrial tomography to control and optimization flow systems , 2018, Open Physics.

[15]  Jacek Kryszyn,et al.  Gain Adjustment for Signal-to-Noise Ratio Improvement in Electrical Capacitance Tomography System EVT4 , 2017, IEEE Sensors Journal.

[16]  Andrzej Romanowski,et al.  Application of electrical capacitance tomography and artificial neural networks to rapid estimation of cylindrical shape parameters of industrial flow structure , 2016 .

[17]  Manuchehr Soleimani,et al.  Planar array 3D electrical capacitive tomography , 2013 .

[18]  Gola Arkadiusz,et al.  Application of OEE Coefficient for Manufacturing Lines Reliability Improvement , 2017 .

[19]  Andrzej Romanowski,et al.  Big Data-Driven Contextual Processing Methods for Electrical Capacitance Tomography , 2019, IEEE Transactions on Industrial Informatics.