论文信息 - MODELING OF A DYNAMIC MIRROR ACTUATOR

MODELING OF A DYNAMIC MIRROR ACTUATOR

A novel dual-actuated dynamic mirror actuator (DMA) is presented for laser beam steering. The DMA is driven by a pair of piezoelectric stack actuaors (PESAs). The piezoelectric stacks are modeled using a linear model and five variations of constitutive models from literature. The resulting DMA models are simulated. While the constitutive models capture some higher order dynamics, the linear model provides the best combination of accuracy to experimental data and simplicty of model between DC and the first natural frequency of the DMA. For control of the DMA up to the first natural frequency of the DMA, a linear model should be adequate.Copyright © 2010 by ASME

James A. Mynderse | George T.-C. Chiu

[1] Reinder Banning,et al. Modeling piezoelectric actuators , 2000 .

[2] X.B. Chen,et al. Modeling of Piezo-Actuated Positioning Systems , 2007, 2007 International Conference on Mechatronics and Automation.

[3] Michael Goldfarb,et al. Modeling Piezoelectric Stack Actuators for Control of Mlcromanlpulatlon , 2022 .

[4] W. Clark. Vibration Control with State-Switched Piezoelectric Materials , 2000 .

[5] Ridha Ben Mrad,et al. Electromechanical Modeling of Piezoceramic Actuators for Dynamic Loading Applications , 2006 .

[6] H.M.S. Georgiou,et al. Experimental and theoretical assessment of PZT modeled as RC circuit subject to variable voltage excitations , 2004 .

[7] William W. Clark,et al. Semi-active vibration control with piezoelectric materials as variable-stiffness actuators , 1999, Smart Structures.

[8] Michael Goldfarb,et al. Behavioral implications of piezoelectric stack actuators for control of micromanipulation , 1996, Proceedings of IEEE International Conference on Robotics and Automation.