Which one is more effective to add to building envelope: Phase change material, thermal insulation, or their combination to meet zero-carbon-ready buildings?

[1]  R. Bennacer,et al.  Multilayer assembly of phase change material and bio-based concrete: A passive envelope to improve the energy and hygrothermal performance of buildings , 2022, Energy Conversion and Management.

[2]  Rasool Kalbasi,et al.  Buildings with less HVAC power demand by incorporating PCM into envelopes taking into account ASHRAE climate classification , 2022, Journal of Building Engineering.

[3]  Rasool Kalbasi.  Usefulness of PCM in building applications focusing on envelope heat exchange – Energy saving considering two scenarios , 2022, Sustainable Energy Technologies and Assessments.

[4]  M. Sharifpur,et al.  The effect of using tubes filled with phase change materials in the air conditioning system of a residential building , 2022, Journal of Building Engineering.

[5]  Rouhollah Ahmadi,et al.  In situ latent thermal energy storage in underfloor heating system of building connected to the parabolic trough solar collector-an experimental study , 2021, Journal of Energy Storage.

[6]  M. Sharifpur,et al.  Focusing on summer setpoint temperature to intensify PCM effectiveness in building: energy saving in Jeddah climate , 2021, Chemical Engineering Communications.

[7]  Mashhour A. Alazwari,et al.  Role of solar radiation on the phase change material usefulness in the building applications , 2021, Journal of Energy Storage.

[8]  Abdulwahab A. Alnaqi,et al.  Usefulness of loading PCM into envelopes in arid climate based on Köppen–Geiger classification - Annual assessment of energy saving and GHG emission reduction , 2021, Journal of Energy Storage.

[9]  Jianjun Zhao,et al.  Life cycle cost assessment and multi-criteria decision analysis of environment-friendly building insulation materials - A review , 2021, Energy and Buildings.

[10]  Ahmed B. Khoshaim,et al.  Using phase change material as an energy-efficient technique to reduce energy demand in air handling unit integrated with absorption chiller and recovery unit–Applicable for high solar-irradiance regions , 2021 .

[11]  Ahmed B. Khoshaim,et al.  Effects of examine the phase change material through applying the solar collectors: exergy analysis of an air handling unit equipped with the heat recovery unit , 2021 .

[12]  Lingyong Ma,et al.  Energy saving performance optimization and regional adaptability of prefabricated buildings with PCM in different climates , 2021, Case Studies in Thermal Engineering.

[13]  Abdulwahab A. Alnaqi,et al.  Energy-saving of building envelope using passive PCM technique: A case study of Kuwait City climate conditions , 2021 .

[14]  G. Cheraghian,et al.  Loading PCM Into Buildings Envelope to Decrease Heat Gain-Performing Transient Thermal Analysis on Nanofluid Filled Solar System , 2021, Frontiers in Energy Research.

[15]  Aakash C. Rai,et al.  Energy performance of phase change materials integrated into brick masonry walls for cooling load management in residential buildings , 2021, Building and Environment.

[16]  Liu Yang,et al.  Thermophysical properties and applications of nano-enhanced PCMs: An update review , 2020, Energy Conversion and Management.

[17]  Farivar Fazelpour,et al.  Multi-objective optimization of energy performance of a building considering different configurations and types of PCM , 2019, Solar Energy.

[18]  Robin Wilson,et al.  A Review of Transparent Insulation Material (TIM) for building energy saving and daylight comfort , 2018, Applied Energy.

[19]  Hashim Hizam,et al.  Estimation of Hourly, Daily and Monthly Global Solar Radiation on Inclined Surfaces: Models Re-Visited , 2017 .

[20]  Majid Amidpour,et al.  Economic optimization of PCM and insulation layer thickness in residential buildings , 2016 .

[21]  Hossein Shokouhmand,et al.  Experimental investigation on melting heat transfer characteristics of lauric acid in a rectangular thermal storage unit , 2013 .