Gas/oil/water flow measurement by electrical capacitance tomography

In the oil industry, it is important to measure gas/oil/water flows produced from oil wells. To determine gas and oil production, it is necessary to measure the water-in-liquid ratio (WLR), liquid fraction and some other flow-rate related parameters. A research team from The University of Manchester and Schlumberger Cambridge Research Ltd have developed a non-radioactive gas/oil/water flow experimental apparatus based on a flow conditioning device, multi-modality electrical capacitance tomography (ECT) and microwave sensors. This paper presents a model-based image reconstruction algorithm for the ECT system, which is used to derive WLR and the thickness of liquid layer of oil-continuous annular flows formed by the flow conditioning device. The experimental results of the ECT sensor tested on TUV-NEL's Multiphase Flow Facility are presented.

[1]  Wuqiang Yang,et al.  An Improved Normalisation Approach for Electrical Capacitance Tomography , 1999 .

[2]  Tohru Fukano,et al.  Measurement of time varying thickness of liquid film flowing with high speed gas flow by a constant electric current method (CECM) , 1998 .

[3]  Wuqiang Yang,et al.  Hardware design of electrical capacitance tomography systems , 1996 .

[4]  O. Isaksen,et al.  A capacitance-based tomography system for interface measurement in separation vessels , 1994 .

[5]  V. S. V. Rajan,et al.  Multiphase flow measurement techniques -- A review , 1993 .

[6]  Wuqiang Yang,et al.  Online measurement and control of solids moisture in fluidised bed dryers , 2009 .

[7]  Cheng‐gang Xie.  Measurement Of Multiphase Flow Water Fraction And Water‐cut , 2007 .

[8]  Wuqiang Yang,et al.  New AC-based capacitance tomography system , 1999 .

[9]  Maurice Beck,et al.  Tomographic imaging of two-component flow using capacitance sensors , 1989 .

[10]  B. T. Hjertaker,et al.  Three-phase flow measurement in the petroleum industry , 2012 .

[11]  Wuqiang Yang,et al.  Calibration of capacitance tomography systems: a new method for setting system measurement range , 1996 .

[12]  Maurice Beck,et al.  Design of capacitance electrodes for concentration measurement of two-phase flow , 1990 .

[13]  Wuqiang Yang,et al.  Development of capacitance tomographic imaging systems for oil pipeline measurements , 1995 .

[14]  Wuqiang Yang,et al.  Tomography for multi-phase flow measurement in the oil industry , 2005 .

[15]  Brian S. Hoyle,et al.  Electrical capacitance tomography for flow imaging: system model for development of image reconstruction algorithms and design of primary sensors , 1992 .

[16]  Wuqiang Yang,et al.  Adaptive calibration of a capacitance tomography system for imaging water droplet distribution , 2004 .

[17]  Tomasz Dyakowski,et al.  Measurements of oil-water separation dynamics in primary separation systems using distributed capacitance sensors , 2005 .

[18]  Lihui Peng,et al.  Image reconstruction algorithms for electrical capacitance tomography , 2003 .

[19]  J. Klausner,et al.  A Capacitance Sensor for Two-Phase Liquid Film Thickness Measurements in a Square Duct , 1997 .

[20]  Jan-Erik Nordtvedt,et al.  A new reconstruction algorithm for process tomography , 1993 .