Influence of laser pulse on solidification of molten pool during laser welding of dissimilar Ti-based amorphous alloys

Dissimilar Ti-based amorphous alloy sheets were butt welded by a pulsed laser and metallurgical joints were obtained. The β-Ti crystal grains in nanometre scale unevenly distribute on the amorphous background in the fusion zone. With the increase of laser pulse energy and pulse duration, the crystalline β-Ti grains grow up from spherical to dendritical profile, but the crystalline size reaches its maximum of about 1 µm, which is much smaller than the grains in base metal. The refinement of the grains in fusion zone results from the fast cooling speed during welding. The microhardness in the welded joints ranges from 470 to 525 HV. Average tensile strength of the welded joint is about 1510 MPa (86% of pure Ti-based amorphous alloy BM and 91% of β-Ti dendrite reinforced Ti-based amorphous alloy BM).

[1]  Sanbao Lin,et al.  Microstructures of the pulsed laser welded TiZrBeCuMo composite amorphous alloy joint , 2020 .

[2]  A. Heidarzadeh,et al.  Development of BMG-B2 nanocomposite structure in HAZ during laser surface processing of ZrCuNiAlTi bulk metallic glasses , 2020 .

[3]  N. Schell,et al.  Controlling intermetallic compounds formation during laser welding of NiTi to 316L stainless steel , 2020 .

[4]  W. Pilarczyk.  The structure and nanomechanical properties of amorphous welds made at reduced temperature , 2019, Journal of Alloys and Compounds.

[5]  L. Ning,et al.  Joining of Zr60Ti17Cu12Ni11 bulk metallic glass and aluminum 1060 by underwater explosive welding method , 2019, Journal of Manufacturing Processes.

[6]  M. Brandt,et al.  Development of Bulk Metallic Glass Matrix Composites (BMGMC) by Additive Manufacturing: Modelling and Simulation – A Review: Part A , 2019, Advanced Materials Research.

[7]  J. Pan,et al.  Microstructural evolution and properties of laser spot-welded Zr Al Co Ta bulk metallic glass under various initial welding temperatures , 2019, Intermetallics.

[8]  K. Narayana,et al.  Numerical Simulation of the Processes of Formation of a Welded Joint with a Pulsed ND:YAG Laser Welding of ZR–1%NB Alloy , 2019, Thermal Engineering.

[9]  A. Kania,et al.  Welding and Characterization of Bulk Metallic Glasses Welds , 2019, Acta Physica Polonica A.

[10]  N. Schell,et al.  Laser welding of precipitation strengthened Ni-rich NiTiHf high temperature shape memory alloys: Microstructure and mechanical properties , 2019, Materials & Design.

[11]  J.P. Oliveira,et al.  Laser welding of Cu-Al-Be shape memory alloys: Microstructure and mechanical properties , 2018, Materials & Design.

[12]  C. Kiminami,et al.  Resistance upset welding of Zr-based bulk metallic glasses , 2018 .

[13]  C. Tan,et al.  Microstructure and crystallization mechanism of Ti-based bulk metallic glass by electron beam welding , 2018 .

[14]  Wenwu Zhang,et al.  Effect of laser surface melting on bulk metallic glass: Investigation of microstructure, microhardness, friction and wear properties , 2018 .

[15]  Yuming Zhang,et al.  Microstructures and microhardness of the welding joint between Zr44Ti11Ni10Cu10Be25 bulk metallic glass and 1100 aluminum , 2018 .

[16]  Nicholas P. Lavery,et al.  Laser processing of bulk metallic glass: A review , 2017 .

[17]  Toshihiro Omori,et al.  Dissimilar laser welding of superelastic NiTi and CuAlMn shape memory alloys , 2017 .

[18]  Jie Fu,et al.  Effect of nanosecond pulse laser ablation on the surface morphology of Zr-based metallic glass , 2016 .

[19]  E. Brousseau,et al.  Nanosecond laser processing of Zr41.2Ti13.8Cu12.5Ni10Be22.5 with single pulses , 2016 .

[20]  W. Pilarczyk,et al.  The investigation of the structure of bulk metallic glasses before and after laser welding , 2015 .

[21]  S. H. Chen,et al.  ZrCu-based bulk metallic glass composites with large strain-hardening capability , 2015 .

[22]  F. Wu,et al.  Stabilized shear banding of ZrCu-based metallic glass composites under tensile loading , 2014, Journal of Materials Science.

[23]  F. Wu,et al.  Plastic stability of metallic glass composites under tension , 2013 .

[24]  A. Inoue,et al.  Weldability and Mechanical Property of Ni53Nb20Ti10Zr8Co6Cu3 Metallic Glass Foil by Laser Welding , 2011 .

[25]  A. Takeuchi,et al.  Recent development and application products of bulk glassy alloys , 2011 .

[26]  Z. Zhang,et al.  Effect of microstructures on the compressive deformation and fracture behaviors of Zr47Cu46Al7 bulk metallic glass composites , 2007 .

[27]  Changhee Lee,et al.  Phase evolution in Cu54Ni6Zr22Ti18 bulk metallic glass Nd:YAG laser weld , 2006 .

[28]  L. Xing,et al.  Laser welding of Zr45Cu48Al7 bulk glassy alloy , 2006 .