Substructuring and Component Mode Synthesis

Substructuring and component mode synthesis (CMS), is a very popular method of model reduction for large structural dynamics problems. Starting from the pioneering works on this technique in the early 1960s, many researchers have studied and used this technique in a variety of applications. Besides model reduction, CMS offers several other crucial advantages. The present work aims to provide a review of the available literature on this important technique.

[1]  R. L. Goldman,et al.  Vibration analysis by dynamic partitioning. , 1969 .

[2]  Steven Dubowsky,et al.  On the Dynamic Analysis and Behavior of Industrial Robotic Manipulators With Elastic Members , 1983 .

[3]  J. Kirkhope,et al.  Component mode synthesis for multi-shaft rotors with flexible inter-shaft bearings , 1994 .

[4]  Geng Xie,et al.  A new approach of the dynamic substructure method , 1992 .

[5]  Mehdi Setareh,et al.  Tuned Mass Dampers to Control Floor Vibration from Humans , 1992 .

[6]  E. Wilson,et al.  Dynamic analysis by direct superposition of Ritz vectors , 1982 .

[7]  Noureddine Bouhaddi,et al.  Substructuring using a linearized dynamic condensation method , 1992 .

[8]  B. G. Prakash,et al.  Reduction techniques in dynamic substructures for large problems , 1986 .

[9]  Louis Jezequel,et al.  A hybrid method of modal synthesis using vibration tests , 1985 .

[10]  Y. G. Tsuei,et al.  Direct Component Modal Synthesis Technique for System Dynamic Analysis , 1989 .

[11]  J. Ginsberg,et al.  An Acoustic Variational Principle and Component Mode Synthesis Applied to the Analysis of Acoustic Radiation from a Concentrically Stiffened Plate , 1991 .

[12]  F. C. Nelson A Review of Substructure Analysis of Vibrating Systems , 1979 .

[13]  Edward L. Wilson,et al.  Use of Special Ritz Vectors in Dynamic Substructure Analysis , 1986 .

[14]  Mohamed El-Sayed,et al.  Parallel finite element computation with separate substructures , 1990 .

[15]  A. Hale On substructure synthesis and its iterative improvement for large nonconservative vibratory systems , 1982 .

[16]  Y. Yasui Improved mode superposition reanalysis method , 1993 .

[17]  Noureddine Bouhaddi,et al.  A method for selecting master DOF in dynamic substructuring using the Guyan condensation method , 1992 .

[18]  Jorn S. Hansen,et al.  Substructure Synthesis Method for Frequency Response of Viscoelastic Structures , 1995 .

[19]  R. L. Citerley,et al.  Application of Ritz vectors for dynamic analysis of large structures , 1985 .

[20]  Victor Yee,et al.  Reduction of component mode synthesis formulated matrices for correlation studies , 1990 .

[21]  Akio Nagamatsu,et al.  Vibration Analysis by Substructure Synthesis Method : Part 4, Calculation of Residual Compliance Matrix , 1985 .

[22]  Mehdi Setareh,et al.  USING COMPONENT MODE SYNTHESIS AND STATIC SHAPES FOR TUNING TMDS , 1992 .

[23]  W. A. Benfield,et al.  Vibration Analysis of Structures by Component Mode Substitution , 1971 .

[24]  Jeffrey K. Bennighof,et al.  Component mode iteration for frequency calculations , 1987 .

[25]  Akio Nagamatsu,et al.  Vibration Analysis by Multiple Component Mode Synthesis Method , 1984 .

[26]  E. J. Gunter,et al.  A Study of the Modal Truncation Error in the Component Mode Analysis of a Dual-Rotor System , 1982 .

[27]  G. Roeck,et al.  Multi-level substructuring and an experimental self-adaptive newton-raphson method for two-dimensional nonlinear analysis , 1989 .

[28]  J. S. Przemieniecki Matrix Structural Analysis of Substructures , 1963 .

[29]  S. N. Hou,et al.  Review of modal synthesis techniques and a new approach , 1969 .

[30]  M. Bampton,et al.  Coupling of substructures for dynamic analyses. , 1968 .

[31]  R. Craig,et al.  Free-interface methods of substructure coupling for dynamic analysis , 1976 .

[32]  Roy R. Craig,et al.  Generalized Substructure Coupling Procedure for Damped Systems , 1982 .

[33]  G. M. L. Gladwell,et al.  Branch mode analysis of vibrating systems , 1964 .

[34]  Henryk Flashner An orthogonal decomposition approach to modal synthesis , 1986 .

[35]  Klaus-Jürgen Bathe,et al.  On nonlinear dynamic analysis using substructuring and mode superposition , 1981 .

[36]  G. De Roeck,et al.  Application of the substructuring technique to non-linear dynamic structural analysis , 1990 .

[37]  T. S. Aziz,et al.  Application of Wilson-Ritz vectors in dynamic substructuring , 1993 .

[38]  J. Kirkhope,et al.  Component Mode Synthesis For Damped Rotor Systems With Hybrid Interfaces , 1994 .

[39]  Alain Curnier,et al.  On three modal synthesis variants , 1983 .

[40]  A. L. Hale,et al.  A Procedure for Improving Discrete Substructure Representation in Dynamic Synthesis , 1982 .

[41]  L. Meirovitch,et al.  Rayleigh-Ritz Based Substructure Synthesis for Flexible Multibody Systems , 1991 .

[42]  R. Greif Substructuring and Component Mode Synthesis , 1986 .

[43]  R. Greif,et al.  Substructuring and modal synthesis for damped systems , 1983 .

[44]  Earl H. Dowell,et al.  Component mode analysis of nonlinear, nonconservative systems , 1980 .

[45]  R. Craig,et al.  Component mode synthesis for model order reduction of nonclassicallydamped systems , 1989 .

[46]  Leonard Meirovitch,et al.  A general substructure synthesis method for the dynamic simulation of complex structures , 1980 .

[47]  R. Craig Methods of component mode synthesis , 1977 .

[48]  M. S. Tavakoli,et al.  Eigensolutions of joined/hermetic shell structures using the state space method , 1989 .

[49]  W. Hurty Dynamic Analysis of Structural Systems Using Component Modes , 1965 .

[50]  Z. A. Parszewski,et al.  Rotor-Bearing Systems Stability: Composition Approach with Bearing Shape Function Presentation , 1989 .

[51]  E. Haug,et al.  A substructure technique for dynamics of flexible mechanical systems with contact-impact , 1990 .

[52]  B. Häggblad,et al.  Model reduction methods for dynamic analyses of large structures , 1993 .

[53]  de A Bram Kraker,et al.  Rubin's CMS reduction method for general state-space models , 1996 .

[54]  Ahmed K. Noor,et al.  Recent Advances and Applications of Reduction Methods , 1994 .

[55]  Kenji Kubomura,et al.  Component mode synthesis for damped structures , 1987 .

[56]  K. Kubomura,et al.  A Theory of Substructure Modal Synthesis , 1982 .

[57]  Akio Nagamatsu,et al.  Analysis of Vibration by Component Mode Synthesis Method : Part 1. Natural Frequency and Natural Mode, (I) , 1981 .

[58]  R. Craig A review of time-domain and frequency-domain component mode synthesis method , 1985 .

[59]  D. T. Nguyen,et al.  Eigensolution for large structural systems with substructures , 1980 .

[60]  A. A. Huckelbridge,et al.  Boundary flexibility method of component mode synthesis using static Ritz vectors , 1990 .

[61]  Leonard Meirovitch,et al.  Inclusion Principle for the Rayleigh-Ritz Based Substructure Synthesis , 1991 .

[62]  S. Rubin Improved Component-Mode Representation for Structural Dynamic Analysis , 1975 .

[63]  R. C. Engels,et al.  Convergence improvement for component mode synthesis , 1992 .

[64]  W X Zhong,et al.  A 3-D ANALYSIS SYSTEM OF JACKET PLATFORM DASOS-J , 1988 .

[65]  H. D. Nelson,et al.  Stability Analysis of Rotor-Bearing Systems Using Component Mode Synthesis , 1980 .

[66]  T. S. Sankar,et al.  Dynamic Response of Rotors Using Modal Reduction Techniques , 1989 .

[67]  Charbel Farhat,et al.  On a component mode synthesis method and its application to incompatible substructures , 1994 .

[68]  R. Hintz Analytical Methods in Component Modal Synthesis , 1975 .

[69]  H. Saunders,et al.  Finite element procedures in engineering analysis , 1982 .

[70]  Jon D. Collins,et al.  Dynamic analysis of large structures by modal synthesis techniques. , 1971 .

[71]  R. D. Marangoni,et al.  Vibration Analysis Of A Motor-Flexible Coupling-Rotor System Subject To Misalignment And Unbalance, Part I: Theoretical Model And Analysis , 1994 .

[72]  D. Cho,et al.  A component mode synthesis applied to mechanisms for an investigation of vibration , 1992 .

[73]  L. Suárez,et al.  Improved Fixed Interface Method for Modal Synthesis , 1992 .

[74]  Luis E. Suarez,et al.  Dynamic condensation with synthesis of substructure eigenproperties , 1992 .

[75]  Paul Sas,et al.  Dynamic Analysis of Flexible Structures Using Component Mode Synthesis , 1989 .

[76]  Frédéric Bourquin,et al.  Intrinsic component mode synthesis and plate vibrations , 1992 .

[77]  Warren P. Seering,et al.  Dynamic Modeling of Systems With Translating Components , 1991 .

[78]  L. Jezequel,et al.  Component Modal Synthesis Methods Based on Hybrid Models, Part I: Theory of Hybrid Models and Modal Truncation Methods , 1994 .

[79]  J. H. Wang,et al.  A substructure modal synthesis method with high computation efficiency , 1990 .

[80]  Frédéric Bourquin,et al.  Numerical study of an intrinsic component mode synthesis method , 1992 .

[81]  Edward J. Kuhar,et al.  Dynamic Transformation Method for Modal Synthesis , 1974 .

[82]  Y. G. Tsuei,et al.  Transient Response by Component Modal Synthesis Method , 1990 .

[83]  Akio Nagamatsu,et al.  Comparison of Component Mode Synthesis Method with MSC-NASTRAN , 1984 .

[84]  R. Macneal A hybrid method of component mode synthesis , 1971 .

[85]  Y. Soucy,et al.  Damping synthesis using complex substructure modes and a Hermitian system representation , 1985 .