Rate dependent constitutive relations based on Anand model for 92.5Pb5Sn2.5Ag solder

A rate dependent constitutive model, the Anand model, was applied to represent the inelastic deformation behavior for a Pb-rich solder 92.5Pb5Sn2.5Ag used in electronic packaging and surface mount technology. This rate dependent model is a unified viscoplastic constitutive model using an internal state variable, the deformation resistance, to describe the averaged isotropic resistance to macroscopic plastic flow. In order to obtain the acquired data for the fitting of the material parameters of this unified model for 92.5Pb5Sn2.5Ag solder, a series of experiments of constant strain rate test and constant load creep test were conducted under isothermal conditions at different temperatures ranged from -65/spl deg/C to 250/spl deg/C. A procedure for the determination of material parameters was proposed in this paper. Model simulations and verifications revealed that there are good agreements between model predictions and experimental data. Moreover, some discussions on using this rate dependent model in the finite element simulation of stress/strain responses of solder joints under thermal fatigue loading were presented.

[1]  J. Wilde,et al.  Applying Anand Model to Represent the Viscoplastic Deformation Behavior of Solder Alloys , 2001 .

[2]  S. Knecht,et al.  Constitutive relation and creep-fatigue life model for eutectic tin-lead solder , 1990 .

[3]  V. Sarihan,et al.  Temperature Dependent Viscoplastic Simulation of Controlled Collapse Solder Joint Under Thermal Cycling , 1993 .

[4]  E. Busso,et al.  A Visco-Plastic Constitutive Model for 60/40 Tin-Lead Solder Used in IC Package Joints , 1992 .

[5]  S. Rzepka,et al.  Experimental Characterization of Material Properties of 63Sn37Pb Flip Chip Solder Joints , 1998 .

[6]  Edward Chan-Jiun Jih,et al.  Constitutive Behavior and Low Cycle Thermal Fatigue of 97Sn-3Cu Solder Joints , 1993 .

[7]  K. Banerji,et al.  Constitutive relations for tin-based-solder joints , 1992, 1992 Proceedings 42nd Electronic Components & Technology Conference.

[8]  Lallit Anand,et al.  An objective time-integration procedure for isotropic rate-independent and rate-dependent elastic-plastic constitutive equations , 1990 .

[9]  Jürgen Wilde,et al.  Influences of packaging materials on the solder joint reliability of chip scale package assemblies , 1999, Proceedings International Symposium on Advanced Packaging Materials. Processes, Properties and Interfaces (IEEE Cat. No.99TH8405).

[10]  L. Anand,et al.  An internal variable constitutive model for hot working of metals , 1989 .

[11]  F. M. Haggag,et al.  Tensile, creep, and ABI tests on sn5%sb solder for mechanical property evaluation , 1997 .

[12]  J. Tien,et al.  Creep-fatigue interaction in eutectic lead-tin solder alloy , 1987 .

[13]  H. Solomon.  The creep and strain rate sensitivity of a high Pb content solder with comparisons to 60Sn/40Pb solder , 1990 .

[14]  M. Thoben,et al.  An integrated design approach for the hardware optimization of electrical power modules for automotive electrotraction , 1999, Proceedings of the IEEE International Vehicle Electronics Conference (IVEC'99) (Cat. No.99EX257).

[15]  L. Anand.  Constitutive equations for hot-working of metals , 1985 .

[16]  M. Veidt.  Viscoelastic tensile and shear properties of the 62 wt% Sn–36 wt% Pb–2 wt% Ag solder alloy , 1998 .

[17]  J. Lau,et al.  Thermal stress/strain analysis of ceramic quad flat pack packages and interconnections , 1990, 40th Conference Proceedings on Electronic Components and Technology.

[18]  B. Moran,et al.  Creep, stress relaxation, and plastic deformation in Sn-Ag and Sn-Zn eutectic solders , 1997 .

[19]  S. V. Harren,et al.  On the Constitutive Response of 63/37 Sn/Pb Eutectic Solder , 1996 .

[20]  B. Z. Hong,et al.  Nonlinear finite element simulation of thermoviscoplastic deformation of C4 solder joints in high density packaging under thermal cycling , 1994, Proceedings of 1994 4th Intersociety Conference on Thermal Phenomena in Electronic Systems (I-THERM).

[21]  Makoto Kitano,et al.  Modeling Complex Inelastic Deformation Processes in IC Packages’ Solder Joints , 1994 .