Evaluation of a compression molded composite bipolar plate for direct methanol fuel cell

[1]  Shimshon Gottesfeld,et al.  Methanol transport through Nafion membranes : Electro-osmotic drag effects on potential step measurements , 2000 .

[2]  Antonino S. Aricò,et al.  DMFCs: From Fundamental Aspects to Technology Development , 2001 .

[3]  Isa Bar-On,et al.  Technical cost analysis for PEM fuel cells , 2002 .

[4]  K. S. Dhathathreyan,et al.  Direct methanol fuel cells: determination of fuel crossover in a polymer electrolyte membrane , 2003 .

[5]  B. Yi,et al.  Studies on performance degradation of a direct methanol fuel cell (DMFC) in life test , 2004 .

[6]  Wayne H. Smith,et al.  Ionomer Segregation in Composite MEAs and Its Effect on Polymer Electrolyte Fuel Cell Performance , 2004 .

[7]  Osamu Kobayashi,et al.  Mass production cost of PEM fuel cell by learning curve , 2004 .

[8]  L. Shaw,et al.  A novel concept of carbon-filled polymer blends for applications in PEM fuel cell bipolar plates , 2005 .

[9]  P. Kauranen,et al.  Injection moulding of graphite composite bipolar plates , 2006 .

[10]  Y. Run-zhang,et al.  Study on the electrical and mechanical properties of polyvinylidene fluroide/titanium silicon carbide composite bipolar plates , 2006 .

[11]  Qin Xin,et al.  Test on the degradation of direct methanol fuel cell , 2006 .

[12]  J. Kuo,et al.  Nylon 6/CB polymeric conductive plastic bipolar plates for PEM fuel cells , 2006 .

[13]  D. Wilkinson,et al.  Degradation of polymer electrolyte membranes , 2006 .

[14]  Rakesh B. Mathur,et al.  Properties of graphite-composite bipolar plate prepared by compression molding technique for PEM fuel cell , 2007 .

[15]  Shimshon Gottesfeld,et al.  Fuel cell techno-personal milestones 1984–2006 , 2007 .

[16]  S. Sivaram,et al.  High-temperature, polymer-graphite hybrid composites for bipolar plates: Effect of processing conditions on electrical properties , 2007 .

[17]  S. Jana,et al.  Highly conductive epoxy/graphite composites for bipolar plates in proton exchange membrane fuel cells , 2007 .

[18]  Yan Ming Wang,et al.  Study on the electrical and mechanical properties of phenol formaldehyde resin/graphite composite for bipolar plate , 2007 .

[19]  Dai Gil Lee,et al.  Bipolar plate made of carbon fiber epoxy composite for polymer electrolyte membrane fuel cells , 2008 .

[20]  Shuo-Jen Lee,et al.  Preparation and properties of carbon nanotube/polypropylene nanocomposite bipolar plates for polymer electrolyte membrane fuel cells , 2008 .

[21]  Tao Yang,et al.  Study on the mesocarbon microbeads/polyphenylene sulfide composite bipolar plates applied for proton exchange membrane fuel cells , 2008 .

[22]  Li Xu,et al.  Surface modification of a natural graphite/phenol formaldehyde composite plate with expanded graphite , 2008 .

[23]  Aiju Li,et al.  Study on carbon nanotube reinforced phenol formaldehyde resin/graphite composite for bipolar plate , 2008 .

[24]  Weiqiang Wang,et al.  Effects of resin content and preparing conditions on the properties of polyphenylene sulfide resin/graphite composite for bipolar plate , 2008 .

[25]  C. Hong,et al.  Effect of carbon fillers on properties of polymer composite bipolar plates of fuel cells , 2009 .

[26]  T. L. Dhami,et al.  Influence of Expanded Graphite Particle Size on the Properties of Composite Bipolar Plates for Fuel Cell Application , 2009 .