Simulations for gas flows in microgeometries using the direct simulation Monte Carlo method

Abstract Micro gas flows are often encountered in MEMS devices and classical CFD could not accurately predict the flow and thermal behavior due to the high Knudsen number. Therefore, the gas flow in microgeometries was investigated using the direct simulation Monte Carlo (DSMC) method. New treatments for boundary conditions are verified by simulations of micro-Poiseuille flow, compared with the previous boundary treatments, and slip analytical solutions of the continuum theory. The orifice flow and the corner flow in microchannels are simulated using the modified DSMC codes. The predictions were compared with existing experimental phenomena as well as predictions using continuum theory. The results showed that the channel geometry significantly affects the microgas flow. In the orifice flow, the flow separation occurred at very small Reynolds numbers. In the corner flow, no flow separation occurred even with a high driving pressure. The DSMC results agreed well with existing experimental information.

[1]  Jing Fan,et al.  Direct Simulation Methods for Low-Speed Microchannel Flows , 2000 .

[2]  N. Hadjiconstantinou,et al.  Constant-Wall-Temperature Nusselt Number in Micro and Nano-Channels 1 , 2002 .

[3]  Shwin-Chung Wong,et al.  Pressure Boundary Treatment in Micromechanical Devices Using The Direct Simulation Monte Carlo Method , 2001 .

[4]  K.-C. Tseng,et al.  Analysis of micro-scale gas flows with pressure boundaries using direct simulation Monte Carlo method , 2001 .

[5]  B. Z. Cybyk,et al.  Direct Simulation Monte Carlo: Recent Advances and Applications , 1998 .

[6]  Y. Zohar,et al.  Gas flow in constriction microdevices , 2000 .

[7]  M. Gad-el-Hak.  The Fluid Mechanics of Microdevices—The Freeman Scholar Lecture , 1999 .

[8]  Se-Ran Jun,et al.  A variational spectral method for the two-dimensional Stokes problem , 1998 .

[9]  William W. Liou,et al.  Heat transfer in microchannel devices using DSMC , 2001 .

[10]  Graeme A. Bird,et al.  Molecular Gas Dynamics , 1976 .

[11]  R. Nance,et al.  Role of Boundary Conditions in Monte Carlo Simulation of Microelectromechanical Systems , 1998 .

[12]  Francis J. Alexander,et al.  Cell size dependence of transport coefficients in stochastic particle algorithms , 1998 .

[13]  William W. Liou,et al.  Implicit Boundary Conditions for Direct Simulation Monte Carlo Method in MEMS Flow Predictions , 2000 .

[14]  Y. Zohar,et al.  Flow separation in constriction microchannels , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[15]  G. Bird.  Recent advances and current challenges for DSMC , 1998 .

[16]  K. Breuer,et al.  Numerical Modeling of Micromechanical Devices Using the Direct Simulation Monte Carlo Method , 1996 .

[17]  William W. Liou,et al.  Computations of the Flow and Heat Transfer in Microdevices Using DSMC With Implicit Boundary Conditions , 2002 .

[18]  Masato Ikegawa,et al.  Development of a Rarefield Gas Flow Simulator Using the Direct-Simulation Monte Carlo Method : 2-D Flow Analysis with the Pressure Conditions Given at the Upstream and Downstream Boundaries , 1990 .

[19]  Toshihisa Nishioka,et al.  A hybrid experimental-numerical study on the mechanism of three-dimensional dynamic fracture , 2003 .

[20]  Hassan Hassan,et al.  Role of Boundary Conditions in Monte Carlo Simulation of MEMS Devices , 1997 .

[21]  Fellow Asme,et al.  The Fluid Mechanics of Microdevices — The Freeman Scholar Lecture , 1999 .

[22]  Errol B. Arkilic,et al.  Measurement of the Mass Flow and Tangential Momentum Accommodation Coefficient in Silicon Micromachined Channels , 1997 .

[23]  Chih-Ming Ho,et al.  MICRO-ELECTRO-MECHANICAL-SYSTEMS (MEMS) AND FLUID FLOWS , 1998 .

[24]  W. Steckelmacher.  Molecular gas dynamics and the direct simulation of gas flows , 1996 .