Global fluid flow and heat transfer characteristics analysis of an open air-cooled drive motor for drilling application

[1]  Xinghua Chang,et al.  PRELIMINARY INVESTIGATION ON UNSTRUCTURED MESH GENERATION TECHNIQUE BASED ON ADVANCING FRONT METHOD AND MACHINE LEARNING METHODS1) , 2021 .

[2]  C. Gerada,et al.  High-Speed Permanent Magnet Synchronous Motor Iron Loss Calculation Method Considering Multiphysics Factors , 2020, IEEE Transactions on Industrial Electronics.

[3]  Mircea Popescu,et al.  Numerical and Experimental Calculation of CHTC in an Oil-Based Shaft Cooling System for a High-Speed High-Power PMSM , 2020, IEEE Transactions on Industrial Electronics.

[4]  Hao Shao,et al.  Analysis of Temperature Field and Water Cooling of Outer Rotor In-Wheel Motor for Electric Vehicle , 2019, IEEE Access.

[5]  Oskar Wallmark,et al.  Computationally Efficient Modeling of Electrical Machines With Cooling Jacket , 2019, IEEE Transactions on Transportation Electrification.

[6]  Y. C. Chong,et al.  Improving the Thermal Performance of Rotary and Linear Air-Cored Permanent Magnet Machines for Direct Drive Wind and Wave Energy Applications , 2019, IEEE Transactions on Energy Conversion.

[7]  Wei Chen,et al.  Design and optimization of dual-cycled cooling structure for fully-enclosed permanent magnet motor , 2019, Applied Thermal Engineering.

[8]  Sung Chul Kim,et al.  Thermal characteristics and effects of oil spray cooling on in-wheel motors in electric vehicles , 2019, Applied Thermal Engineering.

[9]  Sunghyun Moon,et al.  High-Reliable Temperature Prediction Considering Stray Load Loss for Large Induction Machine , 2019, IEEE Transactions on Magnetics.

[10]  Gopal Singh,et al.  Impact of Imbalanced Wind Turbine Generator Cooling on Reliability , 2019, 2019 10th International Renewable Energy Congress (IREC).

[11]  F. Marignetti,et al.  CFD analyses of a radial fan for electric motor cooling , 2018, Thermal Science and Engineering Progress.

[12]  T. Tran,et al.  Experimental Study of Oil Cooled Induction Motor for Hybrid and Electric Vehicles , 2018, 2018 XIII International Conference on Electrical Machines (ICEM).

[13]  K. Hameyer,et al.  Thermal Analysis of an Electrical Traction Motor with an Air Cooled Rotor , 2018, 2018 IEEE Transportation Electrification Conference and Expo (ITEC).

[14]  C. Gerada,et al.  Design and Losses Analysis of a High Power Density Machine for Flooded Pump Applications , 2018, IEEE Transactions on Industry Applications.

[15]  Dong Wang,et al.  Electromagnetic-Thermal-Fluidic Analysis of Permanent Magnet Synchronous Machine by Bidirectional Method , 2018, IEEE Transactions on Magnetics.

[16]  A. S. Fawzal,et al.  Air inlet/outlet arrangement for rotor cooling application of axial flux PM machines , 2018 .

[17]  Ronghai Qu,et al.  Ventilation and Thermal Improvement of Radial Forced Air-Cooled FSCW Permanent Magnet Synchronous Wind Generators , 2017, IEEE Transactions on Industry Applications.

[18]  Se-Jin Yook,et al.  Effect of air-gap fans on cooling of windings in a large-capacity, high-speed induction motor , 2016 .

[19]  Jianhua Wu,et al.  Numerical analysis of temperature distribution of motor-refrigerant in a R32 rotary compressor. , 2016 .

[20]  Babak Fahimi,et al.  Thermal Modeling and Analysis of a Double-Stator Switched Reluctance Motor , 2015, IEEE Transactions on Energy Conversion.

[21]  Yan Zhang,et al.  Production and Properties of Soft Magnetic Cores Made From Fe-Rich FeSiBPCu Powders , 2015, IEEE Transactions on Magnetics.

[22]  Weili Li,et al.  Thermal Optimization for a HSPMG Used for Distributed Generation Systems , 2013, IEEE Transactions on Industrial Electronics.

[23]  Stephen Pickering,et al.  CFD modelling of an entire synchronous generator for improved thermal management , 2012 .

[24]  Renyuan Tang,et al.  Research on the Airflow and Thermal Performance in a Large Forced Air-Cooled Permanent Magnet Synchronous Machine , 2019, IEEE Access.